16
LS500_QG_U
When Driving
■Seat adjustment switches
Seat position adjustment
Seatback angle adjustment
Head restraint heigh t adjustment (if
equipped)
Seat cushion (front) angle adjustment
Vertical heig ht adjustment
Lumbar support adjustment
Seat cushion length adjustment (if
equipped)
■Center Display
1Press the seat switch.
2Using the Remote Touch pad, select “Driver Seat Adjustment” or “Passenger Seat
Adjustment”.
Front Seats
Adjustment procedure
A
B
C
D
E
F
G
17
LS500_QG_U
3Select the button for the desired
adjustment.
Head restraint adjustment (if
equipped)
Shoulder bolster adjustment (if
equipped)
Lumbar support adjustment
Pelvic support adjustment
Seatback side bolster adjustment (if
equipped)
Seat cushion side bolster adjustment (if
equipped)
Hip support adjustment (if equipped)
4Perform adjustment usin g the displayed buttons.
The seat will move while a button is selected.
■Using the driver’s seat adjustment switches to adjust the front passenger’s seat
(front passenger mode)
The mode of the driver’s seat adjustment swit ches can be changed to adjust the front pas-
senger’s seat.
1Press the mode change button on the
driver’s side door.
The indicator will illuminate when
front passenger mode is selected.
2Using the seat adju stment switches on
the driver’s seat, adjust the front pas-
senger’s seat.
To cancel front passenger mode, press
the mode change button again.
Front passenger mode will be
canceled automatically if the driver’s
seat adjustment swit ches are not oper-
ated for approximately 30 seconds.
A
B
C
D
E
F
G
Operating the front passenger’s seat from the driver’s seat
A
19
LS500_QG_U
1Turn the engine switch to IGNITION ON mode.
2Check that the shift position is in P.
3Adjust the driver’s seat, steering wheel, outside rear view mirrors and head-up display
(if equipped) to the desired positions.
4While pressing the “SET” button, or
within 3 seconds after the “SET” button
is pressed, press button “1”, “2” or “3”
until the buzzer sounds.
If the selected button has already been
preset, the previously recorded posi-
tion will be overwritten.
When the driver’s seat adjustment
switches are in front passenger mode
( P.17), the position of the driver’s seat
cannot be registered.
To record the position of the front passenger’s seat, adjust the front passenger’s seat to the
desired position and perform step 4 using the buttons on th e front passenger’s side.
1Turn the engine switch to IGNITION ON mode.
2Check that the shift position is in P.
3Press one of the buttons for the driving
position you want to recall until the
buzzer sounds.
When the driver’s seat adjustment
switches are in front passenger mode
( P.17), a driving position cannot be
recalled.
Driving Position Memory
This feature automatically adjusts the positions of the front seats, steering wheel, outside
rear view mirrors and head-up display (if equipped) to make entering and exiting the vehi-
cle easier or to suit your preferences.
Up to 3 different driving positions can be recorded.
Recording a driving position into memory
Recalling a driving position
