2022 LEXUS ES300h light

742-1. Instrument cluster
*1: These lights come on when the power switch is turned to ON mode to indi-
cate that a system check is being per-
formed. They will turn off after the
hybrid system is on, or after a few sec-
onds. There may be a malfunction in a
system if the lights do not come on, or
turn off. Have the vehicle inspected by
your Lexus dealer.
*2: This light illuminates on the multi-infor-mation display.
The indicators inform the driver of the
operating state of the vehicle’s various
systems.
(flashes)
Brake hold operated indica-
tor
*1 (  P.371)
Hybrid system overheat warn-
ing light
*2(  P.371)
Master warning light
*1
(  P.371)
WARNING
QIf a safety system warning light does
not come on
Should a safety system light such as the
ABS and SRS warning light not come on
when you start the hybrid system, this
could mean that these systems are not
available to help protect you in an acci-
dent, which could result in death or seri-
ous injury. Have the vehicle inspected by
your Lexus dealer immediately if this
occurs.
Indicators
Turn signal indicator ( P.158)
(U.S.A.) Headlight indicator (
P.163)
(Canada) Tail light indicator (
P.163)
Headlight high beam indicator
(  P.165)
Automatic High Beam indicator
(  P.166)
PCS warning light
*1, 2
(  P.182)
Cruise control indicator
*3
(  P.204)
Dynamic radar cruise control
indicator
*3 (  P.204)
Cruise control “SET” indica-
tor
*3 (  P.204)
(white)
LTA indicator*3 ( P.197)
(green)
LTA indicator*3 ( P.182, 197)
(orange)
(flashes)LTA indicator*3 (  P.197)
BSM outside rear view mirror
indicators
*1, 4 (  P.214, 230)
BSM indicator ( P.214)
Intuitive parking assist OFF indi-
cator
*1, 2 (if equipped)
(  P.222)
RCTA OFF indicator
*1, 2
(  P.231)
RCD OFF indicator
*2 (if
equipped) ( P.236)
PKSB OFF indicator
*1, 2 (if
equipped) ( P.241)
(flashes)
Slip indicator*1 ( P.254)

752-1. Instrument cluster
2
Vehicle status information and indicators
Drive mode indicators
Except F SPORT models
F SPORT models
*1: These lights come on when the power
switch is turned to ON mode to indi-
cate that a system check is being per-
formed. They will turn off after the
hybrid system is on, or after a few sec-
onds. There may be a malfunction in a
system if the lights do not come on, or
turn off. Have the vehicle inspected by
your Lexus dealer.
*2: This light comes on when the system is turned off.
*3: This light illuminates on the multi-infor-mation display.
*4: This light illuminates on the outside rear view mirrors.
*5: Except F SPORT models: This light illu-minates on the multi-information dis-
play.
*6: When the outside temperature is approximately 37°F (3°C) or lower,
this indicator will flash for approxi-
mately 10 seconds, then stay on.
*7: This light illuminates on the center panel.
VSC OFF indicator
*1, 2
(
 P.254)
Smart access system with push-
button start indicator
*3
(  P.148)
“READY” indicator ( P.148)
AGC indicator
*3 (  P.220)
EV drive mode indicator
(  P.153)
(U.S.A.) Parking brake indicator
(
 P.159)
(Canada) Parking brake indicator
(
 P.159)
Brake hold standby indicator
*1
(  P.161)
Brake hold operated indica-
tor
*1 (  P.161)
EV indicator
*5 (  P.60)
Low outside temperature indi-
cator
*3, 6 (  P.76, 80)
“PASSENGER AIR
BAG” indicator lights
*1, 7
(  P.37)
Traction battery status indica-
tor (if equipped)
*3 (  P.95)
Eco drive mode indicator
(  P.219)
Sport mode indicator ( P.219)
Custom mode indicator (if
equipped) ( P.219)
Eco drive mode indicator
(  P.219)
Sport mode indicator (if
equipped) ( P.219)
Sport S mode indicator (if
equipped) ( P.219)
Sport S+ mode indicator (if
equipped) ( P.219)

792-1. Instrument cluster
2
Vehicle status information and indicators
QPop-up display
Distance until the next engine oil
change will be displayed when a warn-
ing message indicating that oil mainte-
nance should be performed soon or is
required is displayed.
The brightness of the instrument panel
lights can be adjusted.
1 Darker
2 Brighter
QBrightness of the meter lights (day mode
and night mode)
The brightness of the meter lights can be
adjusted individually.
In the following situations, the meters
changes between day mode and night
mode.
ODay mode: When the tail lights are off or
when the tail lights are on but the sur- rounding area is bright
ONight mode: When the tail lights are on
and the surrounding area is dark
Changing the instrument panel
light brightness

842-1. Instrument cluster
QCustomization
The gauges and meters can be customized
on of the multi-information display.
(  P.89)
QDisplay items
 Odometer
Displays the total distance the vehicle has
been driven.
Trip meter A/trip meter B
Displays the distance the vehicle has been
driven since the meter was last reset. Trip
meters A and B can be used to record and
display different distances independently.
Distance until next engine oil
change
Displays the distance the vehicle can be
driven until an oil change is necessary.
QChanging the display
Each time the “ODO TRIP” switch is
pressed, the displayed item will be
changed. When the trip meter is dis-
played, pressing and holding the switch
will reset the trip meter.
QPop-up display
Distance until the next engine oil
change will be displayed when a warn-
ing message indicating that oil mainte-
nance should be performed soon or is
required is displayed.
The brightness of the instrument panel
lights can be adjusted.
WARNING
QThe information display at low tem-
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver’s shifting and the new gear num-
ber appearing on the display. This lag
could cause the driver to downshift
again, causing rapid and excessive
engine braking and possibly an accident
resulting in death or injury.
NOTICE
QTo prevent damage to the engine and
its components
ODo not let the indicator needle of the
tachometer enter the red zone, which
indicates the maximum engine speed.
OThe engine may be overheating if the
engine coolant temperature gauge is
in the red zone (H). In this case, imme-
diately stop the vehicle in a safe place,
and check the engine after it has
cooled completely. ( P.396)
Odometer and trip meter dis-
playChanging the instrument panel
light brightness

852-1. Instrument cluster
2
Vehicle status information and indicators
1Darker
2 Brighter
QBrightness of the meter lights (day mode
and night mode)
The brightness of the meter lights can be
adjusted individually.
In the following situations, the meters
changes between day mode and night
mode.
ODay mode: When the tail lights are off or
when the tail lights are on but the sur-
rounding area is bright
ONight mode: When the tail lights are on
and the surrounding area is dark
The display can be switched between
the center and side positions.
QDisplay (except F SPORT models)
By selecting menu icons on the multi-
information display, a variety of driv-
ing-related information can be dis-
played. The multi-information display
can also be used to change display set-
tings and other vehicle settings.
Warning or suggesti on/advice pop-up
displays are also displayed in certain
situations.
QDisplay (F SPORT models)
Main meter in center position
The multi-information display presents
the driver with a variety of driving-
related information.
Warning or suggesti on/advice pop-up
displays are also displayed in certain
situations.
Changing the main meter loca-
tion
Multi-information display
Display and menu icons

862-1. Instrument cluster
Main meter moved to the right
By selecting menu icons on the multi-
information display, a variety of driv-
ing-related information can be dis-
played. The multi-information display
can also be used to change display set-
tings and other vehicle settings.
Warning or suggestion/advice pop-up
displays are also displayed in certain
situations.
QMenu icons
The menu icons will be displayed by
pressing or of the meter con-
trol switches.
QLiquid crystal display
Small spots or light spots may appear on the
display. This phenomenon is characteristic
of liquid crystal displays, and there is no
problem continuing to use the display.
The multi-information display is oper-
ated using the meter control switches.
/ : Select menu icons
/ : Change displayed con-
Driving information display
( P.87)
Navigation system-linked dis-
play (if equipped) ( P.89)
Audio system-linked display
(  P.89)
Driving support system infor-
mation display ( P.89)
Warning message display
(  P.374)
Settings display ( P.89)
WARNING
QCaution for use while driving
OWhen operating the multi-information
display while driving, pay extra atten-
tion to the safety of the area around
the vehicle.
ODo not look continuously at the multi-
information display while driving as
you may fail to see pedestrians, objects
on the road, etc. ahead of the vehicle.
QThe information display at low tem-
peratures
 P.78, 84
Changing the meter display
A

902-1. Instrument cluster
Default setting
Select to reset the meter display settings to
the default setting.
QVehicle functions and settings that
can be changed
 P.421
QSuspension of the settings display
OSome settings cannot be changed while
driving. When changing settings, park
the vehicle in a safe place.
OIf a warning message is displayed, opera-
tion of the settings display will be sus-
pended.
Displays suggestions to the driver in
the following situations. To select a
response to a displayed suggestion,
use the meter control switches.
QSuggestion to turn on the head-
lights
If the headlights turn off, and the vehi- cle speed is 3 mph (5 km/h) or higher
for a certain amount of time when the
surroundings are dark, a suggestion
message will be displayed.
QSuggestion to turn off the head-
lights
If the headlights are left on for a certain
amount of time with the headlight
switch in after the power switch
has been turned off, a suggestion mes-
sage will be displayed asking if you
wish to turn the headlights off.
To turn the headlights off, select “Yes”.
If a front door is opened after the power
switch is turned off, this suggestion mes-
sage will not be displayed.
QCustomization
Some functions can be customized.
(  P.421)
WARNING
QCautions during setting up the dis-
play
As the hybrid system needs to be operat-
ing during setting up the display, ensure
that the vehicle is parked in a place with
adequate ventilation. In a closed area
such as a garage, exhaust gases includ-
ing harmful carbon monoxide (CO) may
collect and enter the vehicle. This may
lead to death or a serious health hazard.
NOTICE
QDuring setting up the display
To prevent 12-volt battery discharge,
ensure that the hybrid system is operat-
ing while setting up the display features.
Suggestion function

962-1. Instrument cluster
Multi-information display
The image shows all the arrows as an
example. The actual display will vary
depending on conditions.
Gasoline engine
Hybrid battery (traction battery)
Tire
Center Display
The image shows all the arrows as an
example. The actual display will vary
depending on conditions.
Gasoline engine
Electric motor (traction motor)
Hybrid battery (traction battery)
Tires
Side display (12.3-inch display
model)
The image shows all the arrows as an
example. The actual display will vary
depending on conditions.
Gasoline engine
Hybrid battery (traction battery)
Tire
QHybrid battery (traction battery) status
The display changes in 8 levels according
to the remaining charge amount of the
hybrid battery (traction battery).
OThe figure shows the multi-information
display as an example for explanation.
OThese images are examples only, and
may vary slightly from actual conditions.
Low
High
Press the “MENU” button on the
Remote Touch, then select on the
A
B
C
A
B
C
D
Consumption
A
B
C
A
B