2022 KIA TELLURIDE ignition

CENTER PANEL
See section 5 in the Owner’s Manual for more information .
ALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS . *IF EQUIPPED47
CENTER PANEL
REMINDERS:
•
As a bulb check, the EPB malfunction indicator will illuminate for approximately 3 seconds when the ignition switch is turned ON
•
If the warning light does not illuminate temporarily or remains continuously lit, take your vehicle to an authorized Kia dealer and have the system checked
•
The EPB should not be operated while the vehicle is moving
•
A click or electric brake motor sound may be heard while operating or releasing the EPB . These conditions are normal and indicate that the EPB is functioning properly
The Electronic Parking Brake (EPB) system utilizes an electric motor to engage the parking brake .
Applying the Parking Brake
Depress the brake pedal and pull up the EPB switch A . Ensure that the indicator light is illuminated on the instrument cluster .
Releasing the Parking Brake
The EPB will automatically release when the shifter is placed in Reverse or Drive . To release EPB manually, depress the brake pedal, then press the EPB switch A , with the ignition switch in the ON position . Ensure that the indicator light is OFF .
Electronic Parking Brake (EPB)
•Pull up and hold the EPB switch again to increase brake pressure if parked on a decline or incline
•When leaving your keys with parking lot at tendants or valet, make sure to inform them how to operate the EPB
•If parked on a steep incline, pull up the EPB switch for more than 3 seconds for a firmer EPB application vehicle slows down . When the vehicle stops, 1st gear is automatically selected
QUICK TIPS
A
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Electric Parking Brake / Auto Hold Video
QR CODE

CENTER PANEL
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Idle, Stop & Go (ISG) System Video
QR CODE
*IF EQUIPPED48TELLURIDE FEATURES & FUNCTIONS GUIDE
•The ISG system is disabled when:
-A seat belt is unfastened
-The hood or a door is opened
-Bat ter y condition is poor
-The front or rear defroster is turned on
-Engine coolant temperature is low
-The outside ambient temperature is too low/high
-Emission control devices activate
-The vehicle is on a steep slope
QUICK TIPS
CENTER PANEL
A
Idle, Stop & Go (ISG) System
The ISG system is designed to help reduce fuel consumption by automatically shutting down the engine when the vehicle is at a standstill .
When the ISG system is ON and the vehicle is at a standstill, the engine will stop, and the green AUTO STOP indicator A on the instrument cluster will illuminate .
The engine will restart when the brake pedal is released or the shift lever is moved from D (Drive) to the R (Reverse) position or to Manual Shift mode . When the engine restarts, the green AUTO STOP indicator on the instrument cluster will turn off .
To deactivate the ISG system, press the ISG OFF button B . If you press it again, the system will be activated .
See section 5 in the Owner’s Manual for more information .
Images are for illustrative purposes only and may not reflect actual feature or operation .
EPB
AUTO
08
CH
12
3
4
5
6
7
x1000rpm
AUTO
HOLD
160
00
20
40
60
200
220
240
260
80
180
100
160
1
20 140
E F
2040
60
80
100
12 0
1 4 0
MPH
km/h
(Type A instrument cluster shown)
OFF
B
REMINDERS:
•
ISG is active by default at vehicle star tup . When the ignition is cycled, ISG will turn ON again
•
Under cer tain conditions, the engine will restar t automatically even if the brake pedal is still depressed
•
If the AUTO STOP indicator is continuously blinking yellow and the ISG but ton LED is on, please contact an authorized Kia dealer and indicate that the EPB is functioning properly

Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Rear Occupant Alert (ROA) with Ultrasonic Sensors Video
QR CODE
†LEGAL DISCL AIMERS ON BACK INSIDE COVER*IF EQUIPPED52TELLURIDE FEATURES & FUNCTIONS GUIDE
•The 1st aler t message will not display on Instrument Cluster if the rear doors are never opened . Either rear doors must be opened after unlocking the vehicle before the system will activate .
•To temporarily disable aler ts, press the OK but ton B on the Steering Wheel while the message is displayed
•To turn the aler t off while sounding, press the unlock but ton on the Smar t Key or press the door lock but ton on the door handle
•Must be enrolled in UVO ser vices and Kia Access app installed on the phone to receive ROA aler t notifications on your smar tphone
QUICK TIPS
S E AT I N G
SEATING
CRUISE
CANCEL
RES
OK SET
This system is not a substitute for one’s attention and may not detect all movement within the vehicle . Always check the vehicle’s interior before exiting .
Images are for illustrative purposes only and may not reflect actual feature or operation .
See section 4 in the Owner’s Manual for more information .
Rear Occupant Alert (ROA) with Ultrasonic Sensors†4
Rear Occupant Alert (ROA) with Ultrasonic Sensors can help alert the driver when rear passenger(s) are left in the rear seats using the ultrasonic sensors and door monitoring . The system is designed to provide three separate alerts:
•The 1st alert is a message on the Instrument Cluster, “Check Rear Seats” A , and a chime will sound
After the 1st alert, when the doors are locked and there is movement detected in the rear seats, the horn will sound for about 25 seconds . This alert may activate up to eight times within 24 hours, if movement is still detected and system has not been disabled
•If you have installed the Kia Access with UVO Link app on your smartphone, logged in and activated the Rear Occupant Alert notification, a third alert (notification) will be sent to your phone
To turn the system on or off, in the Instrument Cluster, go to User Settings, select Convenience, and then Rear Occupant Alert .
Rear Occupant with Ultrasonic Sensors activates under the following conditions:
•A rear passenger door is opened and closed
•The ignition has been turned off
•The driver ’s door has been opened, then closed
•The doors are locked with the Smart Key or the door lock button on the door handle
Check rear seats
: Alarm OffOK
(But ton layout on right of steering wheel)
A
REMINDERS:
•
To avoid false aler ts, make sure the vehicle’s windows are rolled up
•
If objects such as boxes are stacked in front of the ultrasonic sensors, the system may not detect any movement
•
The ultrasonic sensors may occasionally detect movement in the vehicle and cause false aler ts, when there are no rear occupants present
. False aler ts can occur due to:
–The presence of insects near the system sensor
–Rushing air from a window that is rolled down
–Movement around the exterior of the vehicle
–Surrounding noise or vibration
–Vehicle passing through a car wash
–Movement in the driver or front passenger seat is detected
•
The Rear Occupant Aler t with Ultrasonic Sensors system may fail to detect movement and activate an alarm if:
–Movement is subtle or does not continue
–A small child sits directly in a seat without a car seat
–
A rear passenger is covered with an object such as a blanket, obstructing the sensor ’s view
B

UVO
FRONTREAR
ONOFFDOOR
The sunroof and sunshade operation is controlled by a multidirectional switch/lever for the front and rear sunroofs
. The ignition needs to be in the ON position to operate the sunroof/sunshade .
Slide the sunshade and sunroof A :
Auto Open – Slide lever backward to the farthest position and release .
Auto Close – Slide the lever forward to the farthest position and release (manually close the Sunshade) .
Tilt the sunroof (front only) A :
Raise – Press lever upward
Lower – Push lever forward
Slide the rear sunshade B :
Auto Open – Slide the lever backward
Auto Close – Slide the lever forward
OTHER KEY FEATURES
See section 4 in the Owner’s Manual for more information .
Your vehicle’s sunroof controls may differ from that in the illustration .
Sunroof Operation*
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Sunroof Operation Video
QR CODE
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Cargo Cover & Storage Video
QR CODE
ALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS . *IF EQUIPPED59
AB
OTHER KEY

FEATURES
•To stop the sunroof/sunshade at any position, press or pull the sunroof control lever in any direction
QUICK TIP
•Inser t the third-row seat belts into the retaining clips on the left and right sides before removing/installing Cargo Cover
QUICK TIP
REMINDERS:
•When closing, be mindful of any objects or persons
•
Sunshade must remain OPEN while sunroof is open
•
If the ignition is turned off with the Sunroof not fully closed, the Instrument Cluster LCD will display a warning message and a chime will sound for a few seconds
•
Do not adjust the sunroof or sunshade while driving . This could result in loss of control of the vehicle
(But ton located within overhead lamp console)
Cargo Cover Storage*
To store the Cargo Cover*, close the Cargo Cover and remove it from the slots by pulling the Cargo Cover ends inward C . Remove the luggage box cover .
On the left side, remove the small storage cover D to expose the Cargo Cover storage slot . Insert the Cargo Cover on the right side first . Compress the left end of the Cargo
Cover to slide it into the left slot . Replace the small storage cover and the luggage box cover .
C
D
(View from the rear looking in;left end of the cover shown)