2022 KIA SOUL light

ADAS
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
12†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDSOUL FEATURES & FUNCTIONS GUIDE
CANCEL
RESSET+ _CRUISE
RES
SET+ _<<+>>-
MODE
+>
>-
MODE
CRUISE
CANCELOK
<
<
OK
Lane Keeping Assist (LKA)*†4
Lane Keeping Assist (LK A) is designed to detect the lane markers on the road with a front view camera on the windshield, and may assist the driver ’s steering to potentially help keep the vehicle in the lane .When turned on, the instrument cluster indicator will initially illuminate white . It will remain white when vehicle is traveling less than 40 mph and the system does not detect the lane markers . When LK A detects the lane markers and can assist the steering, the LK A icon will illuminate green .
If LK A detects that you are moving outside of your lane, the system may give an audible warning and display a Lane Departure Warning on the instrument cluster . If the vehicle continues to move outside of the lane, LK A can provide steering inputs, trying to prevent the vehicle from moving outside its lane . LK A is the operating mode by default when the Lane Safety button A is depressed to ON .
To change the LK A mode, go to User Settings in the Instrument Cluster, press the Mode button B on the Steering Wheel when the vehicle is at a standstill, gear shift in Park and with the ignition on or the Engine Start/Stop button* in the ON position, and select User Settings . Go to Driver Assistance then Lane Safety and select one of the following modes:
Active LKA: LK A will automatically assist the driver ’s steering, more frequently than standard LK A , when lane departure is detected to help prevent the vehicle from moving out of its lane .
Lane Keeping Assist: LK A will automatically assist the driver ’s steering when lane departure is detected to help prevent the vehicle from moving out of its lane .
Lane Departure Warning: LK A will warn the driver with an audible warning when lane departure is detected . This mode does NOT provide any steering assist .
Off: LK A will turn off . The B indicator light will turn off on the cluster .
All systems will operate under the following conditions:
•The vehicle exceeds approximately 40 mph
•The vehicle is between the lane markers
•LK A recognizes the lane the vehicle is traveling in
Lane Keeping Assist* is not a substitute for safe and proper driving . Always drive safely and use caution . LK A may not always aler t the driver if the vehicle is driven outside of its lane .
For illustrative purposes only .Your actual display, but tons and/or features may var y .Actual User Set tings steps may var y by model .
When the front view camera detects the lanes traveling in, the indicators are illuminated
When the front view camera does not detect the lanes traveling in, the indicator will not illuminate
When the front view camera detects the vehicle moving outside of the lane the vehicle’s traveling in, a yellow indicator will illuminate, either on the left or right lane
Lane Keeping AssistLane Keeping AssistLane Keeping Assist
REMINDERS:
• W h e n the vehicle changes lanes without a turn signal, LK A may sound an audible warning. The warning sound can be adjusted in the User Settings.
• LK A /LDW will not issue a warning if the turn signal or hazard signal is activated
• LKA/LDW will return to its previous state when the ignition is cycled
HUD
i...
P(But ton located in panel to the left of steering wheel)
Lane Keeping Assist
The LK A Warning Volume can be adjusted in the User Set tings or the Vehicle Set tings* on the audio head unit .
QUICK TIP
B
C
(Controls located on right side of Steering Wheel)
Refer to section 5 in the Owner ’s Manual for more information .
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Lane Keeping AssistVideo
QR CODE
A

ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
ADAS
13†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS .
Blind-Spot Collision Warning (BCW)*†4
BCW uses rear corner radar sensors in the rear bumper to monitor and warn the driver, in certain situations, if it detects an approaching vehicle in the driver ’s blind spot area . The BCW System is ON when the button A is pressed – the button light will illuminate . The outside rearview mirror warning lights will also illuminate for 3 seconds .
1st-stage warning: When another vehicle is detected within the blind-spot area B, or when a vehicle is detected closing at high speed, a yellow indicator will illuminate on the outside rearview mirrors .
2nd-stage warning: When 1st-stage warning is on and the driver activates a turn signal, a flashing yellow indicator will illuminate on the outside rearview mirrors and the system will sound a warning .
BCW User Settings:
To activate BCW, go to User Settings in the Instrument Cluster by pressing the Mode button C on the Steering Wheel . Select Driver Assistance > Blind-Spot Safety and then press the OK button D . Select Warning Only or Off .
REMINDERS:
•
BCW will not issue a warning if the vehicle speed is 6 mph or more than the speed of the surrounding vehicles
•
When BCW is ON and the ignition is cycled, BCW returns to its previous state
•
The BCW warning sound can be adjusted in User Set tings
HUD
i...
P
#VU UPO
MPDBUFE
JO
QBOFM
UP
UIF
MFGU
PG
TUFFSJOH
XIFFM

#$8
JT
B
TVQQMFNFOUBM
TZTUFN 
%P
OPU
SFMZ
TPMFMZ
PO
UIJT
TZTUFN
BOE
BMXBZT
QBZ
BU UFOUJPO
UP
UIF
SPBE
BOE
JUT
DPOEJUJPOT
#$8
JT
OPU
B
TVCTUJUVUF
GPS
TBGF
BOE
QSPQFS
ESJWJOH
"MXBZT
ESJWF
TBGFMZ
BOE
VTF
DBVUJPO 
*NBHFT
BSF
GPS
JMMVTUSBUJWF
QVSQPTFT
POMZ
BOE
NBZ
OPU
SF7UFDU
BDUVBM
PQFSBUJPO 
3FGFS
UP
TFDUJPO

JO
UIF
0XOFS sT
.BOVBM
GPS
NPSF
JOGPSNBUJPO 
3FGFS
UP
UIF
JOTJEF
GSPOU
DPWFS
GPS

NPSF
JOGPSNBUJPO
PO
23
DPEFT XXXZPVUVCF DPN,JB'FBUVSF7JEFPT
Blind-Spot CollisionWarning Video
QR CODE
•BCW Warning Volume* can be adjusted in the User Set tings in the Instrument Cluster or the Vehicle Set tings* on the audio head unit . Go to Driver Assistance, then Warning Volume
•BCW will activate when:
– The system is turned on
– Other vehicles are detected on the rear sides of the vehicle
– Vehicle speed is above approximately 20 mph
QUICK TIPS
CANCEL
RES
SET+ _
CRUISE
RES
SET+ _<
<+>>-
MODE
+>
>-
MODE
CRUISE
CANCELOK
<
<
OK
(Controls located on right side of Steering Wheel)
C
D
B
A

17†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS .
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
ADAS
(Rear Camera)(Rear-Camera Display)
P
R
N
DSHIFTL OCK
RELEASE
Check surroundings for your safety
Rear View Monitor (RVM)†4
The Rear View Monitor is a supplemental system that displays the view behind the vehicle through the audio control unit screen while the vehicle is in Reverse .
The Rear View Monitor activates when the:
1 . Engine Start/Stop button* is in the ON position (green light)
2 .
Gear Shift Lever is in the R (Reverse) position
Rear View Monitor is not a substitute for proper and safe backing-up procedures . Rear View Monitor may not display ever y object behind the vehicle . Always drive safely and use caution when backing up .
For illustrative purposes only . Display may var y .
Refer to section 4 in the Owner ’s Manual for more information .
REMINDERS:
•
While the Rear View Monitor is active the volume will be lowered on all audio modes
•Always drive carefully and use caution when backing up
•
The vehicle speed needs to be slower than 9 mph for the system to operate
•
Through normal use and after inclement weather or washing, the rear camera may become dir t y . Use a clean, microfiber cloth to remove any dir t, debris or spots that may have accumulated on the lens
•
While the Rear View Monitor is active the volume will be lowered on all audio modes

DRIVER'S PANEL
DRIVER’SPANEL
20†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDSOUL FEATURES & FUNCTIONS GUIDE
Hill-Start Assist Control (HAC)†6
HAC is designed to prevent the vehicle from rolling backward when accelerating from a stop while on a steep incline . The HAC automatically activates whether the ESC is OFF or ON, but does NOT activate when the ESC has malfunctioned .
Instrument Panel Dimmer
With parking lights / headlights ON, press the button B + or – to adjust display brightness of the instrument panel illumination .
Illumination
Max
MaxMin
HUD
i...
P
#VU UPO
MPDBUFE
JO
QBOFM
UP
UIF
MFGU
PG
TUFFSJOH
XIFFM

REMINDERS:
•
Door Mood Lamp is a fixed brightness and cannot be adjusted (not to be confused with Advanced Mood Lighting Speaker)
•
If the brightness reaches to the maximum or minimum level, an alarm will sound
REMINDERS:
•
The HAC does not operate when the gear shift is in the P (Park) or the N (Neutral) position
•In the event of HAC system malfunction, see an Authorized Kia Dealer for ser vice
•HAC does not replace the need to apply brakes while the vehicle is stopped on an incline
Refer to section 5 in the Owner ’s Manual for more information .
Refer to section 5 in the Owner ’s Manual for more information .
Refer to section 4 in the Owner ’s Manual for more information .
HUD
i...
P
OFF
Electronic Stability Control (ESC)*†6
(But ton located in panel to the left of steering wheel)
The ESC system is designed to help stabilize the vehicle during certain cornering maneuvers . It is a good idea to keep the ESC turned ON for daily driving whenever possible .
Press ESC button A to turn ESC OFF/ON .
•HAC provides a t wo-second delay before the vehicle may star t rolling backwards
•When HAC is active (e .g ., accelerating from a stop on an incline), you may notice that the brakes will momentarily remain engaged after you depress the accelerator
QUICK TIPS
REMINDERS:
•ESC is ON by default at vehicle star tup . When ignition is cycled, ESC will turn ON again
•
The ESC Indicator Light in the instrument cluster will be lit momentarily whenever the ESC is active
B
A

DRIVER'S PANEL
DRIVER’SPANEL
21†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS .
Refer to section 5 in the Owner ’s Manual for more information .
ENGINESTART
STOP
#VU UPO
MPDBUFE
BCPWF
(FBS
4IJGU

Engine Start/Stop Button*†7
To start the engine:
1 . Depress the brake pedal
2 . Press the ENGINE START/STOP button while gear shift is in P (Park) (light A will not illuminate when starting)
To turn the engine OFF – Press the ENGINE START/STOP button again .
To use the ENGINE START/STOP button, the Smart Key fob must be in the vehicle .
REMINDERS:
•In an emergency situation while the vehicle is in motion, you are able to turn the engine off and to the ACC position by pressing the ENGINE START/STOP but ton for more than 2 seconds or 3 times successively within 3 seconds
•If Smar t Key fob bat ter y is dead, with the lock but ton facing the ENGINE START/STOP but ton, hold the fob up against the ENGINE START/STOP but ton and press
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Engine Star t/Stop But ton Video
QR CODE
Kia Smar t & FoldingKey Fobs VideoTo use electrical accessories:
– ACC position
• When in the OFF position (no light) and without depressing the brake pedal, press the ENGINE START/STOP but ton once (amber light A )
– On position
• When already in the ACC position (amber light A ) and without depressing the brake pedal, press the ENGINE START/STOP but ton again (reddish-orange light A )
• When in the OFF position (no light) and without depressing the brake pedal, press the ENGINE START/STOP but ton t wice (reddish-orange light A )
Keeping the vehicle in ACC or the ON position without engine running may discharge the vehicle’s battery.
QUICK TIPS
A

DRIVER’SPANEL
DRIVER'S PANEL
22†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDSOUL FEATURES & FUNCTIONS GUIDE
A Pull/Press to operate Driver ’s and Front Passenger ’s window Auto Up/Down*
B Press to Unlock/Lock All Doors
C Press to disable Rear Passenger Windows
Power Windows, Window Lock & Central Door Lock
If the inner door handle is pulled once when the door is locked, the door will unlock . If the inner door handle is pulled once more, the door will open .
Refer to section 4 in the Owner ’s Manual for more information .
Rear Door Locks
R
L
R
L
Button configuration may var y depending on vehicle model .
Refer to section 4 in the Owner ’s Manual for more information .
Automatic Door Lock/Unlock
Auto Door Lock/Unlock will engage when the gear shift is moved into or out of the P (Park) position . Refer to the User Settings in the LCD Instrument Cluster modes on how to turn Auto Door Lock/Unlock ON/OFF .
Refer to section 4 in the Owner ’s Manual for more information .
Power / Heated Outside Mirrors*
To adjust mirrors: Toggle switch D left or right to select mirror . Then press arrows E to adjust mirror position .
Mirror heaters automatically turn ON/OFF at the same time the Rear Window Defroster is turned ON/OFF . The Rear Window
Defroster button* is located on climate control system panel .
Refer to section 4 in the Owner ’s Manual for more information .
A
B
C
D
E
REMINDERS:
•When but ton C is pressed, window controls for the Rear Passenger Windows are disabled
•When closing, be mindful of any objects or persons
•While driving with the rear windows down or with the sunroof* in an open or par tially open position, a wind buffeting or pulsation noise may be heard . This noise is a normal occurrence and can be reduced or eliminated by the following:
•If the noise occurs with one or both of the rear windows down, par tially lower both front windows approximately 1 inch
•If the noise occurs with the sunroof open, slightly reduce the size of the sunroof opening
QUICK TIPS
Press but ton again to stop Auto Up/Down function .
QUICK TIP

STEERING WHEEL CONTROLS
24†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDSOUL FEATURES & FUNCTIONS GUIDE
STEERING WHEEL CON
-
TROLS
AUTOAutomatic Headlights / High Beam Assist (HBA)* position
Headlight position
Parking Light position
OFFOFF position
OFF
OFF
Headlights & High Beams
To operate:
Rotate lever switch to change the Headlight function
Push lever to turn High Beams ON
Pull lever to flash Headlights / High Beams
AUTO Light position – When the light switch is in the AUTO light position, the tail lights and headlights will turn ON/OFF automatically, depending on the amount of light outside the vehicle .
High Beam Assist (HBA)* – High Beam Assist is designed to automatically adjust the headlight range by switching between high and low beams based on light detected from other vehicles and road conditions .
To enable HBA , toggle the light switch to the AUTO Light position and turn on the high beams by pushing the lever away from you . The High Beam Assist indicator will illuminate .
Turn Signals & Fog Lights*
To operate:
•Turn Signals - Move lever Up/Down for Right/Left Turn Signal
•Slightly move lever up/down to activate One-Touch Lane Change Signal
•Fog Lights - Press switch up/down to turn Fog Lights ON/OFF
One-Touch Lane Change Signal is activated by briefly pressing the Turn Signal Lever up/down slightly up or down for less than 1 second and then releasing . The lane change signal will blink 3 times .
To change how many times the Lane Change Signal blinks (3/5/7), go to User Settings Mode* in the LCD Instrument Cluster modes (Type B cluster) .
REMINDER: Headlights must be ON for Fog Light operation .
REMINDERS:
•HBA will operate when vehicle speed exceeds 25 mph
•
If the lever is pushed away from you while HBA is operational, HBA will turn off and the high beams will be on continuously . If the lever is pulled toward you while HBA is operational, HBA will turn off
•
If the light switch is switched to the headlight position, HBA will turn off and low beams will be on continuously
•
When the warning pop-up illuminates on the instrument cluster, the HBA is not working properly . See an authorized Kia dealer for ser vice
•
High Beam Assist does not operate below cer tain speeds, or in some lighting and driving conditions . Please be aware of your surroundings and exercise proper road etiquet te when operating a vehicle using the high beams
OFF
OFF
0OF5PVDI

-BOF
$IBOHF

4JHOBM
'PS
JMMVTUSBUJWF
QVSQPTFT
POMZ
:PVS
BDUVBM
EJTQMBZ

CVU UPOT
BOEPS
GFBUVSFT
NBZ
WBS Z
3FGFS
UP
TFDUJPO

JO
UIF
0XOFS sT
.BOVBM
GPS
NPSF
JOGPSNBUJPO

CENTER PANEL
CENTER PANEL
33†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS .
Multimedia USB Port A: Use the Multimedia USB Port to connect USB audio and smartphone devices .
USB Charger Port B: Use the USB Charger Port on the right to charge devices .
One USB Charger Port is located in the back of the center console* . The Engine Start/Stop button needs to in the ACC/ON/START position to operate the USB Charger Port
Power Outlets C: Use the power outlets for mobile phones and other devices designed to operate on a 12V (180W max) power outlet .
(Por ts and power outlets located on lower par t of Center Panel; If equipped, an additional Power Outlet is located in the rear cargo area of the vehicle)
Press the SETUP key, on the audio head unit, then press the GENER AL button then date/time button to enter the clock settings . Then use the onscreen buttons to navigate through setup and return to exit .
Digital ClockMultimedia USB Port, Power
Outlets & USB Charger Ports*
REMINDERS:
•
Kia recommends that you only use USB cables made by your device’s manufacturer . Third-par t y USB cables may cause damage to your device
•
Using the Power Outlet (accessor y plug) for prolonged period time with the Engine Star t/Stop but ton in the ACC position (Engine OFF) could cause the bat ter y to discharge .
•
The Multimedia USB Por t A in the center panel charges slower than the USB Charger Por ts B throughout the vehicle
Refer to section 4 in the Owner ’s Manual for more information .
For more information, refer to the Car Infotainment System Quick Reference Guide .
•When needed, Daylight Savings must be enabled in the Clock Set tings screen (UVO link with Navigation*)
•To access manual date and time set ting, turn GPS Time OFF in the Clock Set tings (UVO link with Navigation*)
QUICK TIPS
•The power outlets are inactive when ignition is in the OFF position
•The USB data por t (Multimedia USB Por t) A is located next to the Power Outlets . USB Charger Por ts do not suppor t data transfer
•The power outlets are inactive when ignition is in the OFF position
QUICK TIPS
BCA