Page 60 of 444
: $ 5N ,N *
7o a Yo L G Ve U Lo X V L Q M X U \ o U Geat K
Only devices designed for use in this type of
outlet should be inserted into any 12 Volt
outlet.
Do not touch with wet hands.
Close the lid when not in use and while
driving the vehicle.
If this outlet is mishandled, it may cause an
electric shock and failure.
CAUTION!
Do not connect devices with power higher
than 180 Watts (15 Ampsyf W R W K H V R F N H W ' R
not damage the socket by using unsuitable
adaptors. If the 180 Watt (15 Ampyf S R Z H U
rating is exceeded the fuse protecting the
system will need to be replaced.
Page 62 of 444
WARNING!
To avoid serious injury or death:
Do not insert any objects into the receptacles.
Do not touch with wet hands.
Close the lid when not in use.
If this outlet is mishandled, it may cause an
electric shock and failure.
WARNING!
When the cigar lighter is in use it becomes
very hot. To avoid serious injury, handle the
cigar lighter with care. Always check that the
cigar lighter has turned off.
CAUTION!
Do not connect devices with power higher
than 180 Watts (15 Ampsyf W R W K H V R F N H W ' R
not damage the socket by using unsuitable
adaptors. If the 180 Watt (15 Ampyf S R Z H U
rating is exceeded the fuse protecting the
system will need to be replaced.
Page 373 of 444
: $ 5N ,N *
When replacing a blown fuse, always use
an appropriate replacement fuse with the
same amp rating as the original fuse. Never
replace a fuse with another fuse of higher
amp rating. Never replace a blown fuse with
metal wires or any other material. Failure to
use proper fuses may result in serious
personal injury, fire and/or property
damage.
Before replacing a fuse, make sure that the
ignition is off and that all the other services
are switched off and/or disengaged.
If the replaced fuse blows again, contact an
authorized dealer.
If a general protection fuse for safety
systems (air bag system, braking systemyf
power unit systems (engine system,
gearbox systemyf R U V W H H U L Q J V \ V W H P E O R Z V
contact an authorized dealer.
1 — Fuse Element
2 — Blade Fuse with a good/functional
fuse element
3 — Blade fuse with a bad/not functional
fuse element (blown fuseyf
8
21_BV_OM_EN_USC_t.book Page 371
