2022 HYUNDAI SANTA FE HYBRID parking brake

Foreword / Hybrid System Overview
1-16
CAUTION

[ Always keep the charging connector
and charging plug in clean and
dry condition. Be sure to keep the
charging cable in a condition where
there is no water or moisture.

[ Make sure to use the designated
charger for charging the electric
vehicle. Using any other charger may
cause failure.

[ Before charging the battery, turn the
vehicle OFF.

[ When the vehicle is switched OFF
while charging, the cooling fan
inside the motor compartment may
automatically operate. Do not touch
the cooling fan while charging.

[ Be careful not to drop the charging
connector. The charging connector can be damaged.AC Charge
„AC Charger
OLFP0Q5007K
Actual charger image and charging
method may vary in accordance with the
charger manufacturer.
How to Connect AC Charger
1. Depress the brake pedal and apply the parking brake.
2. Turn OFF all switches, shift to P (Park), and turn OFF the vehicle.
OTMPHQ010005L
3. Press center edge of the charging door to open the charging door.

01
1-23
How to Connect Portable Charger
(ICCB: In-Cable Control Box)
PlugPlug Electric OutletElectric Outlet
OLFP0Q5020K
1. Connect the plug to a household electric outlet.
OOSEVQ018056
2. Check if the power lamp (green) illuminates on the control box.
3. Depress the brake pedal and apply the parking brake.
4. Turn OFF all switches, shift to P (Park), and turn OFF the vehicle.
OTMPHQ010005L
5. Press center edge of the charging door to open the charging door.
6. Check if there is dust on the charging connector and charging inlet.
OTMPHQ010006L
7. Hold the charging connector handle and connect it to the vehicle AC
charging inlet. Push the connector
until you hear a "clicking" sound. If
the charging connector and charging
terminal are not connected properly,
this may cause a fire.

01
1-33
Starting the Vehicle
Vehicles with smart key system
1. Carry the smart key or leave it inside the vehicle.
2. Make sure the parking brake is firmly applied.
3. Make sure the shift button is in P (Park). With the shift button in N
(Neutral), you cannot start the vehicle.
4. Depress the brake pedal.
5. Press the Engine Start/Stop button. If the hybrid system starts, the “
”
indicator will come on.
Whether the engine is cold or warm, it
should be started without depressing
the accelerator.
After following the start procedures, “
” indicator on the instrument
cluster will turn on. For more details,
please check chapter 6.
ECONOMICAL and SAFE OPERATION of
Hybrid system
[ Drive smoothly. Accelerate at a
moderate rate and maintain a steady
cruising speed. Do not make “jack-
rabbit” starts. Do not race between
stoplights.
Avoid heavy traffic whenever possible.
Always maintain a safe distance
from other vehicles so you can
avoid unnecessary braking. This also
reduces brake wear out.

[ The regenerative brake generates
energy when the vehicle decelerates.

[ When the hybrid battery power is
low, the hybrid system automatically
recharges the hybrid battery.

[ When the engine is running with the
shift button in N (Neutral), the hybrid
system cannot generate electricity.
The hybrid battery cannot recharge
with the shift button in N (Neutral).
Information
In the hybrid system, the engine
automatically runs and stops. When the hybrid system operates, the “
”
indicator is illuminated. In the following situation, the engine may
operate automatically.
- When the engine is ready to run
- When the hybrid battery is being charged
- Depending on the temperature condition of the hybrid battery
Special Features
Hybrid vehicles sound different than
gasoline engine vehicles. When the
hybrid system operates, you may
hear a sound from the hybrid battery
system under the floor. If you apply
the accelerator pedal rapidly, you may
hear an unconventional sound. When
you apply the brake pedal, you may
hear a sound from the regenerative
brake system. When the hybrid system
is turned off or on, you may hear a
sound in the engine compartment. If
you depress the brake pedal repeatedly
when the hybrid system is turned on,
you may hear a sound in the engine
compartment. None of these sounds
indicate a problem. These are normal
characteristics of hybrid vehicles.
If any of following occur, it’s a normal
condition if you hear a motor sound in
the engine compartment:
- After turning off the hybrid system, the brake pedal is released.
- When the hybrid system is turned off, the brake pedal is applied.
- When the driver door is opened.
DRIVING THE HYBRID VEHICLE

2-4
Vehicle Information
The actual shape may differ from the illustration.
OTM010003
[A] : Type A, [B] : Type B
1. Inside door handle ................................. 5-14
2. Power window switches ....................... 5-41
3. Power window lock switch ................. 5-43
/Electronic child safety lock button ..... 5-16
4. Side view mirror folding button............5-37
5. Side view mirror control button ...........5-37
6. Central door lock switch ....................... 5-14
7. Instrument panel illumination control switch .......................................................4-7 8. Lane Safety button ................................7-30
9. Power tailgate open/close button ....... 5-52
10. ESC (Electronic Stability Control) OFF
button .................................................... 6-29
11. EPB (Electronic Parking Brake) switch ..................................................... 6-19
12. Steering wheel .......................................5-22
13. Steering wheel tilt/telescopic switch...5-23
14. Fuse box ................................................9-40
15. Hood release lever ................................ 5-49
16. Seat .......................................................... 3-3
,17(5,2529(59,(:
Ø+<%5,'9(+,&/(

2-5
02
1. Instrument cluster .................................. 4-5
2. Driver’s front air bag ............................. 3-45
3. Engine Start/Stop button ....................... 6-5
4. Infotainment system ...... Infotainment manual
5. Hazard warning lamp switch ................. 8-2
6. Climate control system ........................ 5-82
7. Transmission shift button .....................6-10
8. Auto Hold button .................................. 6-24
9. Heated steering wheel button ..............5-23
10. Drive mode button (On-road)/Terrain mode button (Off-road) ........................ 6-45, 6-48 11. DBC(Downhill Brake Control) button .. 6-33
12. Parking Safety button .......................... 7-124
13. Parking/View button ........................... 7-104
14. Air ventilation seat button ................... 3-20
15. Seat warmer button .............................. 3-18
16. Passenger’s front air bag ..................... 3-45
17. Glove box .............................................. 5-98
18. Wireless charging system pad ............ 5-105
19. Cup holder ...........................................5-100
20. AC inverter ........................................... 5-103
21. USB charger ......................................... 5-103
The actual shape may differ from the illustration.
OTMH010004
,167580(173$1(/29(59,(:
ã,
ä
Ø+<%5,'9(+,&/(

2-10
Vehicle Information,17(5,2529(59,(:
Ø3/8*
Ø,1+<%5,'9(+,&/(
The actual shape may differ from the illustration.
OTMPH011005N
[A] : Type A, [B] : Type B
1. Inside door handle ................................. 5-14
2. Power window switches ....................... 5-41
3. Power window lock switch ................. 5-43
/Electronic child safety lock button ..... 5-16
4. Outside rearview mirror folding button .......................................5-37
5. Outside rearview mirror control switch ........................................5-37
6. Instrument panel illumination control switch ....................................................... 5-7
7. Lane Safety button ................................ 7-19 8. Power tailgate open/close button ....... 5-52
9. ESC (Electronic Stability Control) OFF
button .................................................... 6-28
10. Fuel filler door open button ................. 5-59
11. EPB (Electronic Parking Brake) switch ...6-19
12. Steering wheel .......................................5-22
13. Steering wheel tilt/telescopic switch...5-23
14. Fuse box ................................................9-40
15. Hood release lever ................................ 5-49
16. Seat .......................................................... 3-3

2-11
02
,167580(173$1(/29(59,(:
ã,
ä
Ø3/8*
Ø,1+<%5,' 9(+,&/(
The actual shape may differ from the illustration.
OTMPH010004L
1. Instrument cluster .................................. 4-5
2. Driver’s front air bag ............................. 3-45
3. Engine Start/Stop button ....................... 6-5
4. Infotainment system ...... Infotainment manual
5. Hazard warning lamp switch ................. 8-2
6. Climate control system ........................ 5-82
7. Transmission shift button .....................6-10
8. EV/HEV button ...................................... 1-36
9. Auto Hold button .................................. 6-24
10. Heated steering wheel button ..............5-23
11. AWD lock button .................................. 6-38 12. DBC(Downhill Brake Control) button .. 6-33
13. Parking Safety button .......................... 7-124
14. Parking/View button ........................... 7-104
15. Seat warmer button ............................. 3-20
16. Air ventilation seat button .................... 3-18
17. Passenger’s front air bag ..................... 3-45
18. Glove box .............................................. 5-98
19. Wireless charging system pad ............ 5-105
20. Cup holder ...........................................5-100
21. AC 220V inverter .................................. 5-103
22. USB charger ......................................... 5-103

Safety System
3-12
OTMPH031001N
4. Pull on the seatback folding lever (2nd row seat), then fold the seat toward
the front of the vehicle. When you
return the seatback to its upright
position, always be sure it has locked
into position by pushing on the top of
the seatback.
OTM030074
5. To use the rear seat, lift and pull the seatback backward by pulling the
folding lever. Pull the seatback firmly
until it clicks into place. Make sure the
seatback is locked in place.
6. Return the rear seat belt to the proper position.
WARNING
When returning the rear seatback from
a folded to an upright position, hold the
seatback and return it slowly. Ensure
that the seatback is completely locked
into its upright position by pushing on
the top of the seatback. In an accident
or sudden stop, the unlocked seatback
could allow cargo to move forward with
great force and enter the passenger
compartment, which could result in
serious injury or death.
WARNING
Do not place objects in the rear seats,
since they cannot be properly secured
and may hit vehicle occupants in a
collision causing serious injury or death.
WARNING
Make sure the engine is off, the gear
shifted to P (Park), and the parking
brake is securely applied whenever
loading or unloading cargo. Failure
to take these steps may allow the
vehicle to move if the shift button
is inadvertently pressed to another position.
CAUTION

[ Be careful when loading cargo
through the rear passenger seats
to prevent damage to the vehicle
interior.

[ When cargo is loaded through the
rear passenger seats, ensure the
cargo is properly secured to prevent
it from moving while driving.