2022 HYUNDAI SANTA FE HYBRID low beam
[x] Cancel search: low beamPage 147 of 638
4
LED Headlight Warning Light .................................................................................. 4-19
Icy Road Warning Light ...........................................................................................4-20
Ready Indicator ........................................................................................................4-20
Ev Mode Indicator ....................................................................................................4-20
Electronic Stability Control (ESC) Indicator Light ..................................................4-21
Electronic Stability Control (ESC) OFF indicator Light ...........................................4-21
Immobilizer Indicator Light (With Smart Key) ........................................................4-21
Immobilizer Indicator Light (With Smart Key) ........................................................4-21
Downhill Brake Control (DBC) indicator Light ....................................................... 4-22
Turn Signal Indicator Light ...................................................................................... 4-23
High Beam Indicator Light ...................................................................................... 4-23
Low Beam Indicator Light ....................................................................................... 4-23
Light On Indicator Light .......................................................................................... 4-23
High Beam Assist Indicator Light ........................................................................... 4-23
Cruise Indicator Light .............................................................................................. 4-23
Speed Limiter Indicator Light ................................................................................. 4-24
Sport Mode Indicator Light ..................................................................................... 4-24
Eco Mode Indicator Light ....................................................................................... 4-24
Smart Mode Indicator Light .................................................................................... 4-24
LCD Display Messages ............................................................................................... 4-24
Shift to P ................................................................................................................... 4 -24
Low Key Battery ...................................................................................................... 4-24
Press Start Button While Turning Wheel ................................................................ 4-24
Check Steering Wheel Lock System ....................................................................... 4-24
Press Brake Pedal To Start Engine ......................................................................... 4-25
Key Not in Vehicle ................................................................................................... 4-25
Key Not Detected .................................................................................................... 4-25
Press Start Button Again ......................................................................................... 4-25
Press Start Button With Key ................................................................................... 4-25
Check Brake Switch Fuse ....................................................................................... 4-25
12V Battery Discharging Due to Additional Electrical Devices ............................ 4-25
Door, Hood, Tailgate Open Indicator ......................................................................4-26
Sunroof Open Indicator ..........................................................................................4-26
Low Pressure ............................................................................................................4-26
Wiper/Lights Display ............................................................................................... 4-27
Low Washer Fluid .................................................................................................... 4-27
Low Fuel ................................................................................................................... 4-27
Engine Has Overheated ........................................................................................... 4-27
Check Exhaust System ........................................................................................... 4-27
Check Headlight ..................................................................................................... 4-27
Page 163 of 638
Instrument Cluster
4-18
Exhaust system (GPF)
warning light
[
This warning light illuminates, when
accumulated soot reaches a certain amount.
[ When this warning light illuminates, it
may turn off after driving the vehicle
at more than 80 km/h (50 mph) for
about 30 minutes (above 3rd gear
with 1500 ~ 4000 engine rpm).
If this warning light blinks in spite
of the procedure (at this time LCD
warning message will be displayed),
you have the GPF system checked by
an authorized HYUNDAI dealer.
NOTICE
If you continue to drive with the GPF
warning light blinking for a long time,
the GPF system can be damaged and
fuel consumption can worsen.
Overspeed warning light (if equipped)
This warning light blinks:
[ When you drive the vehicle more than 120 km/h.
- This is to prevent you from driving
your vehicle with overspeed.
- The overspeed warning chime also sound for approximately 5 seconds.
Master warning light
This warning light illuminates:
When there is a malfunction in operation
in any of the following systems: - Forward Collision-Avoidance Assist malfunction (if equipped)
- Forward Collision-Avoidance Assist radar blocked (if equipped)
- Blind-Spot Collision Warning malfunction (if equipped)
- Blind-Spot Collision Warning radar blocked (if equipped)
- LED headlamp malfunction (if equipped)
- High Beam Assist malfunction (if equipped)
- Smart Cruise Control malfunction (if equipped)
- Smart Cruise Control radar blocked (if equipped)
- Tire Pressure Monitoring System (TPMS) malfunction
To identify the details of the warning,
look at the LCD display.
Page 169 of 638
Instrument Cluster
4-24
Turn signal indicator light
This indicator light blinks:
When you operate the turn signal
indicator stalk.
If any of the following occur, there may be a malfunction with the turn signal
system.
- The turn signal indicator light
illuminates but does not blink
- The turn signal indicator light blinks
rapidly
- The turn signal indicator light does not
illuminate at all
If any of these conditions occur, you have
the vehicle inspected by an authorized
HYUNDAI dealer.
High beam indicator light
This indicator light illuminates:
[ When the headlights are on and in the high beam position
[ When the turn signal lever is pulled
into the Flash-to-Pass position.
Low beam indicator light
This indicator light illuminates:
When the headlamps are on. Light ON indicator light
This indicator light illuminates:
When the tail lights or headlights are on.
High Beam Assist indicator
light (if equipped)
This indicator light illuminates:
[
When the high-beam is on with the
light switch in the AUTO light position.
[ If your vehicle detects oncoming or
preceding vehicles, High Beam Assist
system will switch the high beam to
low beam automatically.
For more details, refer to “High Beam
Assist (HBA)” section in chapter 5.
Cruise indicator light (if equipped)
This indicator light illuminates:
When the cruise control system is enabled.
For more details, refer to "Cruise
Control System" in chapter 7.
Page 184 of 638
04
4-39
Master warning group
OTM050218L
This warning light informs the driver the
following situations.
- Forward Collision-Avoidance Assist malfunction (if equipped)
- Forward Collision-Avoidance Assist radar blocked (if equipped)
- Blind-Spot Collision Warning malfunction (if equipped)
- Blind-Spot Collision Warning radar blocked (if equipped)
- LED headlamp malfunction (if equipped)
- High Beam Assist malfunction (if equipped)
- Smart Cruise Control malfunction (if equipped)
- Smart Cruise Control radar blocked (if equipped)
- Tire Pressure Monitoring System (TPMS) malfunction
The Master Warning Light illuminates
if one or more of the above warning
situations occur.
At this time, a Master Warning icon (
)
will appear beside the User Settings icon (
), on the LCD display.
If the warning situation is solved, the
master warning light will be turned
off and the Master Warning icon will
disappear.
OTM040024
Driving force distribution (AWD)
This mode displays information related to
AWD driving force.
If the vehicle is in AWD lock state, this
mode is not displayed.
For detailed information, refer to the
"All Wheel Drive" in the chapter 6.
OTM080005L
Tire Pressure
This mode displays information related to
Tire Pressure.
For more details, refer to "Tire Pressure
Monitoring System (TPMS)" in chapter 8.
Page 191 of 638
Instrument Cluster
4-46
5. Lights
ItemsExplanation
IlluminationTo adjust the illumination level. [
Level 1~20
One touch turn signal [
Off : The one touch turn signal function will be deactivated.
[ 3, 5, 7 Flashes : The turn signal indicator will blink 3, 5, or 7
times when the turn signal lever is moved slightly.
For more details, refer to ''Lighting'' in chapter 5.
Ambient light brightness(If equipped) [
Off
[ Level 1/2/3/4
Ambient light color(If equipped) [
Polar White/Moon White/Ice Blue/Ocean Blue/Jade Green/
Orchid Green/Freesia Yellow/ Sunrise Red/Aurora Purple/
Lightening Violet
Headlight delay To activate or deactivate the headlamp delay function.
For more details, refer to ''Lighting'' in chapter 5.
High Beam Assist To activate or deactivate High Beam Assist.
For more details, refer to ''High Beam Assist (HBA)'' in chap-
ter 5.
Page 274 of 638
05
5-69
OIG046412
Position lamp position ()
The position lamp, license plate lamp
and instrument panel lamp are turned ON.
OIG046413
Headlamp position ()
The headlamp, position lamp, license
plate lamp and instrument panel lamp
are turned ON.
Information
The ignition switch must be in the ON position to turn on the headlamp. High beam operation
OOS047407N
To turn on the high beam headlamp,
push the lever away from you. The lever
will return to its original position.
The high beam indicator will light when
the headlamp high beams are switched on.
To turn off the high beam headlamp, pull
the lever towards you. The low beams will turn on.
OIG046414
To flash the high beam headlamp, pull
the lever towards you, then release the
lever. The high beams will remain ON as
long as you hold the lever towards you.
Page 276 of 638
05
5-71
Headlamp delay function (if equipped)
If you place the ignition switch to the
ACC position or the OFF position with
the headlamps ON, the headlamps (and/
or position lamps) remain on for about
5 minutes. However, if the driver’s door is opened and closed, the headlamps
are turned off after 15 seconds. Also,
with the vehicle off if the driver’s door is
opened and closed, the headlamps (and/
or position lamps) are turned off after 15 seconds.
The headlamps (and/or position lamps)
can be turned off by pressing the lock
button on the smart key twice or turning
the headlamp switch to the OFF or AUTO position.
You can enable the headlamp delay
I X Q F W L R Q E \ V H O H F W L Q J S 6 H W X S Ÿ 8 V H U
6 H W W L Q J V Ÿ / L J K W V Ÿ + H D G O L J K W ' H O D \
NOTICE
If the driver exits the vehicle through
another door besides the driver
door, the battery saver function
does not operate and the headlamp
delay function does not turn OFF
automatically.
This may cause the battery to
discharge. To avoid battery discharge,
turn OFF the headlamps manually from
the headlamp switch before exiting the
vehicle.Traffic change (if equipped)
The low beam light distribution is
asymmetric. If you go abroad to a
country with opposite traffic direction,
this asymmetric part will dazzle
oncoming car driver.
To prevent dazzle, ECE regulation
demand several technical solutions (ex.
automatic change system, adhesive
sheet, down aiming). These headlamps
are designed not to dazzle opposite
drivers.
You can activate or deactivate the Traffic
Change feature from the User Settings
P R G H R Q W K H / & ' G L V S O D \ * R W R S / L J K W V Ÿ
Travel Mode’.
For more details, refer to “LCD Display”
In chapter 4.
Page 277 of 638
Convenience Features
5-72
+ , * + % ( $ 0 $ 6 6 , 6 7 ã + % $ä
OIK047090
High Beam Assist will automatically
adjust the headlamp range (switches
between high beam and low beam)
depending on the brightness of detected
vehicles and certain road conditions.
Detecting sensor
(Front view camera)
OTMH050004
[1] : Front view camera
The front view camera is used as a
detecting sensor to detect ambient light and brightness while driving.
Refer to the picture above for the
detailed location of the detecting sensor.
NOTICE
Always keep the front view camera in
good condition to maintain optimal
performance of High Beam Assist.
For more details on the precautions
of the front view camera, refer to
“Forward Collision-Avoidance Assist
(FCA)” section in chapter 7.
High Beam Assist Settings
: L W K W K H H Q J L Q H R Q V H O H F W S / L J K W V Ÿ + L J K
Beam Assist (or HBA (High Beam Assist))’
from the Settings menu to turn on High
Beam Assist and deselect to turn off the
system.
WARNING
For your safety, change the Settings
after parking the vehicle at a safe
location.