2022 HYUNDAI SANTA FE HYBRID instrument panel

03
3-63
SRS Care
The SRS is virtually maintenance-free
and there are no parts you can safely
service by yourself. If the SRS air bag
warning light does not illuminate when
the Engine Start/Stop button is in the
ON position, or continuously remains
on, we recommend that the system be
immediately inspected by an authorized
HYUNDAI dealer.
We recommend any work on the SRS
system, such as removing, installing,
repairing, or any work on the steering
wheel, the front passenger’s panel, front
seats and roof rails be performed by an
authorized HYUNDAI dealer. Improper
handling of the SRS system may result in
serious personal injury. WARNING
To reduce the risk of serious injury or
death take the following precautions:
[ Do not attempt to modify or disconnect the SRS components or
wiring, including the addition of any
kind of badges to the pad covers or
modifications to the body structure.

[ Do not place objects over or near
the air bag modules on the steering
wheel, instrument panel, and the
front passenger’s panel above the
glove box.

[ Clean the air bag pad covers with
a soft cloth moistened with plain
water. Solvents or cleaners could
adversely affect the air bag covers
and proper deployment of the
system.

[ We recommend that inflated air
bags be replaced by an authorized
HYUNDAI dealer.

[ If components of the air bag system
must be discarded, or if the vehicle
must be scrapped, certain safety
precautions must be observed.
We recommend that you consult
an authorized HYUNDAI dealer for
the necessary information. Failure
to follow these precautions could
increase the risk of personal injury.

4
4. Instrument Cluster
Instrument Cluster - Hybrid Vehcle ................................................................. 4-4
Instrument Cluster -Plug-in-Hybrid Vehicle ................................................... 4-5Instrument Cluster Control ......................................................................................... 4-6Instrument Panel Illumination ................................................................................. 4-6
Gauges and Meters ..................................................................................................... 4-6
Speedometer ............................................................................................................ 4-6
Power Gauge .............................................................................................................. 4-7
Fuel Gauge ................................................................................................................. 4-7
Hybrid Battery Soc (State of Charge) Gauge .......................................................... 4-8
Plug-in hybrid Mode Indicator ................................................................................. 4-8
Outside Temperature Gauge .................................................................................... 4-9
Odometer .................................................................................................................. 4-9
Distance to Empty ................................................................................................... 4-10
Fuel Economy (for 12.3-Inch Cluster) .................................................................... 4-10
Transmission Shift Indicator ....................................................................................... 4-11
Automatic Transmission Shift Indicator .................................................................. 4-11
Warning and Indicator Lights ..................................................................................... 4-11
Seat Belt Warning Light ............................................................................................ 4-11
Air Bag Warning Light ............................................................................................... 4-11
Parking Brake & Brake Fluid Warning Light ............................................................ 4-12
Regenerative Brake Warning Light ......................................................................... 4-13
Anti-Lock Brake System (ABS) Warning Light ........................................................ 4-13
Electronic Brake Force Distribution (EBD) system Warning Light ........................ 4-13
Electric Power Steering (EPS) Warning Light ......................................................... 4-14
Malfunction Indicator Lamp (MIL) .......................................................................... 4-14
Electronic Parking Brake (EPB) Warning Light ...................................................... 4-15
AUTO HOLD Indicator Light .................................................................................... 4-15
Charging System Warning Light ............................................................................. 4-15
Engine Oil Pressure Warning Light ......................................................................... 4-15
Low Fuel Level Warning Light ................................................................................. 4-16
Service Warning Light ............................................................................................. 4-16
Charging Cable Connection Indicator (Plug-in Hybrid Vehicle) ........................... 4-16
Exhaust System (GPF) Warning Light ......................................................................4-17
Overspeed Warning Light .........................................................................................4-17
Master Warning Light ...............................................................................................4-17
Low Tire Pressure Warning Light ............................................................................ 4-18
Forward Safety Warning Light ................................................................................ 4-18
Lane Safety Indicator Light ..................................................................................... 4-18
All Wheel Drive(AWD) Warning Light ..................................................................... 4-19
All wheel Drive(AWD) Lock Indicator Light ............................................................ 4-19

04
4-7
Instrument Cluster Control
Instrument panel illumination
You can adjust the brightness of the
instrument panel illumination form the
User Settings Mode on the LCD display
ZKHQWKHLJQLWLRQVZLWFKLVRQ
S/LJKWV
Ÿ
Illumination’). When the vehicle’s parking
lights or headlamps are on, interior
switch illumination intensity and mood
lamps are also adjusted.
If your vehicle is equipped with
additional navigation, please refer
to the infotainment system manual
separately supplied.
WARNING
Never adjust the instrument cluster
while driving. This could result in loss
of control and lead to an accident that
may cause death, serious injury, or
vehicle damage.
[ The brightness of the instrument
panel illumination is displayed.

[ If the brightness reaches to the
maximum or minimum level, a chime will sound.
Gauges and Meters
Speedometer
„4.2-Inch
OTM040058L
„12.3-Inch
OTM040006
The speedometer indicates the speed of
the vehicle and is calibrated in kilometers
per hour (km/h) and/or miles per hour (MPH).

05
5-19
OTM050087
Integrated Memory System for the
driver’s seat is provided to store and
recall the following memory settings with
a simple button operation.
[ Driver’s seat position

[ Side view mirror position

[ Head-Up Display (HUD) position
WARNING
Never attempt to operate the
integrated memory system while the
vehicle is moving.
This could result in loss of control, and
an accident causing death, serious
injury, or property damage.
Information

[ If the battery is disconnected, the memory settings will be erased.

[ If integrated memory system does not
operate normally, you have the system inspected by an authorized HYUNDAI
dealer.
Storing Memory Positions
1. Shift to P (Park) while the Engine
Start/Stop button is in the ON position.
2. Adjust the driver’s seat position, side view mirror position, steering
wheel position, instrument panel
illumination intensity and head-up
display height/brightness to the
desired position.
3. Press the SET button. The system will beep once and notify you ‘Press
button to save settings’ on the cluster
LCD display.
4. Press one of the memory buttons (1 or 2) within 4 seconds. The system will beep twice when the memory has
been successfully stored.
5. ‘Driver 1 (or 2) settings saved’ will appear on the cluster LCD display. The
message appears only for the driver’s
seat position memory setting.
,17(*5$7('0(025<6<67(0
ã,)(48,33('
ä

Convenience Features
5-20
Recalling Memory Positions
1. Shift to P (Park) while the Engine Start/Stop button is in the ON position.
2. Press the desired memory button (1 or 2). The system will beep once, and
then the driver’s seat position, side
view mirror position, steering wheel
position, instrument panel illumination
intensity and head-up display height/
brightness will automatically adjust to
the stored positions.
3. ‘Driver 1 (or 2) settings applied’ will appear on the cluster LCD display.
Information

[ If you press the SET button or the
corresponding button which the
setting is being recalled, the setting will
temporarily deactivate. If you press the
other buttons, the setting of the pressed button will activate.
For example, if you press the SET
button or number 1 button with the
number 1 setting in operation, the setting will temporarily deactivate. If
you press the number 2 button, the
number 2 setting will activate.

[ If you adjust the seat, rearview mirror, steering wheel, instrument panel
illumination or head-up display while
recalling the stored positions, the pre-set settings will become ineffective.
Resetting The System
Take the following procedures to reset
integrated memory system, when it does
not operate properly.
Resetting integrated memory
system
1. Stop the vehicle and open the driver’s
door with the Engine Start/Stop
button in the ON position and the
vehicle shifted to P (Park).
2. Adjust the driver’s seat and seatback to the foremost position.
3. Press the SET button and push forward the driver’s seat movement
switch over 2 seconds simultaneously.

05
5-69
OIG046412
Position lamp position ()
The position lamp, license plate lamp
and instrument panel lamp are turned ON.
OIG046413
Headlamp position ()
The headlamp, position lamp, license
plate lamp and instrument panel lamp
are turned ON.
Information
The ignition switch must be in the ON position to turn on the headlamp. High beam operation
OOS047407N
To turn on the high beam headlamp,
push the lever away from you. The lever
will return to its original position.
The high beam indicator will light when
the headlamp high beams are switched on.
To turn off the high beam headlamp, pull
the lever towards you. The low beams will turn on.
OIG046414
To flash the high beam headlamp, pull
the lever towards you, then release the
lever. The high beams will remain ON as
long as you hold the lever towards you.

Convenience Features
5-70
Turn signals and lane change signals
OIG046417
To signal a turn, push down on the lever
for a left turn or up for a right turn in
position (A).
If an indicator stays on and does not flash
or if it flashes abnormally, one of the turn
signal bulbs may be burned out and will
require replacement.
One touch turn signal
To use One Touch Turn Signal push the
turn signal lever up or down to position
(B) and then release it. The lane change signals will blink 3, 5 or 7 times.
You can enable the One Touch Turn Signal function or choose the number
RIEOLQNLQJE\VHOHFWLQJ
S6HWXS
Ÿ8VHU
6HWWLQJV
Ÿ/LJKWV
Ÿ2QH7RXFK7XUQ6LJQDO

Ÿ2IIIODVKHVIODVKHVIODVKHV
TLQWKH
instrument panel LCD cluster. Battery saver function
The purpose of this feature is to prevent
the battery from being discharged.
The system automatically turns off the
position lamp when the driver turns the
vehicle off and opens the driver-side
door.
With this feature, the position lamps will
turn off automatically if the driver parks
on the side of road at night.
However, the position lamps stay ON
even when the driver-side door is opened
if the headlamp switch is turned to the
position lamp or AUTO (if equipped)
position after the engine is turned off.
If necessary, to keep the lamps on turn the position lamps OFF and ON
again using the headlamp switch on
the steering column after the engine is
turned off.

05
5-85
Face-Level (B, C, E)
Air flow is directed toward the upper
body and face. Additionally, each outlet
can be controlled to direct the air
discharged from the outlet.
Bi-Level (B, C, D, E, F)
Air flow is directed towards the face and
the floor.
Floor-Level (A, B, D, E, F)
Most of the air flow is directed to the
floor, with a small amount of the air
being directed to the windshield and side
window defrosters.
Floor/Defrost-Level (A, B, D, E, F)
Most of the air flow is directed to the floor and the windshield with a small
amount directed to the side window
defrosters.
Defrost-Level (A, D)
Most of the air flow is directed to the
windshield with a small amount of air
directed to the side window defrosters.
„Front
OTM050124
„Rear
OTM050201
Instrument panel vents
The outlet vents can be opened or closed
separately using the vent control lever.
If you move the vent control lever to the
left end, the outlet vents can be closed.