09
9-37
Motor Compartment Panel Fuse
Replacement
Blade fuse / Cartridge fuse
„Blade type fuse
ONE1091034
„Cartridge type fuse
ONE1091035
1. Turn the vehicle off.
2. Turn all other switches off.
3. Remove the fuse panel cover by
pressing the tap and pulling up.
4. Check the removed fuse; replace it
if it is blown. To remove or insert the
fuse, use the fuse puller in the motor
compartment fuse panel.
5. Push in a new fuse of the same
rating, and make sure it fits tightly in
the clips. If it fits loosely, consult an
authorized HYUNDAI dealer.
NOTICE
After checking the fuse panel in the
motor compartment, securely install
the fuse panel cover. You may hear a
clicking sound if the cover is securely
latched. If it is not securely latched,
electrical failure may occur from water
contact.
Multi fuse
„Multi type
ONE1091036
If the multi fuse is blown, consult an
authorized HYUNDAI dealer.
Maintenance
9-40
Instrument panel fuse panel
Fuse NameFuse Rating Circuit Protected
FRT SEAT HEATER20AFront Air Ventilation Seat Control Module, Front Seat
Warmer Control Module
WASHER15A Multifunction Switch
IBU27.5A IBU
IG3 910A SCU, Rear Inverter, BMU
BMS10A BMU
A/BAG210A SRS Control Module
WIN LH25ADriver Safety Power Window Module, Passenger
Safety Power, Rear Power Window Switch LH
SPARE115A Not Used
E-SHIFTER310A Electronic ATM Shift Lever
MODULE410AFront/Rear Corner Radar LH/RH, Front/Rear Inverter,
Crash Pad Switch, ADAS Driving ECU, VESS Unit,
Front Radar, Front View Camera, ADAS Parking ECU
USB CHARGER15A Front USB Charger #1, Front USB Charger #2
