2022 HYUNDAI I20 warning

4-26
Safety system
WARNING
To reduce the chance of serious or fatal
injuries:
• Children of all ages are safer when
restrained in the rear seat. A child
riding in the front passenger seat can
be forcefully struck by an inflating
air bag resulting in serious or fatal
injuries.
• Always follow the instructions for
installation and use of the child
restraint maker.
• Always make sure the child seat is
secured properly in the car and your
child is securely restrained in the
child seat.
• Never hold a child in your arms or lap
when riding in a vehicle. The violent
forces created during a crash will tear
the child from your arms and throw
the child against the car’s interior.
• Never put a seat belt over yourself
and a child. During a crash, the
belt could press deep into the child
causing serious internal injuries.
• Never leave children unattended
in a vehicle - not even for a short
time. The car can heat up very
quickly, resulting in serious injuries
to children inside. Even very young
children may inadvertently cause the
vehicle to move, entangle themselves
in the windows, or lock themselves or
others inside the vehicle.
• Never allow two children, or any two
persons, to use the same seat belt.• Children often squirm and reposition
themselves improperly. Never let
a child ride with the shoulder belt
under their arm or behind their back.
Always properly position and secure
children in rear seat.
• Never allow a child to stand-up or
kneel on the seat or floorboard of a
moving vehicle. During a collision
or sudden stop, the child can be
violently thrown against the vehicles
interior, resulting in serious injury.
• Never use an infant carrier or a
child safety seat that “hooks” over
a seatback, it may not provide
adequate security in an accident.
• Seat belts can become very hot,
especially when the car is parked in
direct sunlight. Always check seat
belt buckles before fastening them
over a child.
• After an accident, we recommend
that the system be checked by an
authorized HYUNDAI dealer.
• If there is not enough space to place
the child restraint system because
of the driver’s seat, install the child
restraint system in the rear right seat.

4-27
04
Using a child restraint system
CRS09CRS09
„„ Rearward-facing child restraint system Rearward-facing child restraint system
„„ Forward-facing child restraint system Forward-facing child restraint system
OIB034017OIB034017
For small children and babies, the use
of a child seat or infant seat is required.
This child seat or infant seat should be of
appropriate size for the child and should
be installed in accordance with the
manufacturer’s instructions.
For safety reasons, we recommend that
the child restraint system is used in the
rear seats.
WARNING
Never place a rear-facing child restraint
in the front passenger seat, because of
the danger that an inflating passenger-
side air bag could impact the rear-
facing child restraint and kill the child.
WARNING
Child seat installation
• A child can be seriously injured
or killed in a collision if the child
restraint is not properly anchored to
the car and the child is not properly
restrained in the child restraint.
Before installing the child restraint
system, read the instructions
supplied by the child restraint system
manufacturer.
• If the seat belt does not operate
as described in this section, we
recommend that the system be
checked by an authorized HYUNDAI
dealer.
• Failure to observe this manual’s
instructions regarding child restraint
system and the instructions provided
with the child restraint system could
increase the risk and/or severity of
injury in an accident.

4-28
Safety system
Installing a Child Restraint
System (CRS)
WARNING
Before installing your Child Restraint
System always:
• Read and follow the instructions
provided by the manufacturer of the
Child Restraint System.
Failure to follow all warnings and
instructions could increase the risk of
the SERIOUS INJURY or DEATH if an
accident occurs.
WARNING
If the vehicle headrest prevents proper
installation of a Child Restraint System
(as described in the Child Restraint
System manual), the headrest of the
respective seating position shall be
readjusted or entirely removed.After selecting a proper Child Restraint
System and checking that the Child
Restraint System fits properly in the rear
of this vehicle, you are ready to install
the Child Restraint System according to
the manufacturer’s instruction. There are
three general steps in installing the Child
Restraint System properly:
• Properly secure the Child Restraint
System to the vehicle. All Child
Restraint Systems must be secured to
the vehicle with the lap belt or lap part
of a lap/shoulder belt or with the top-
tether and/or ISOFIX anchorage.
• Make sure the Child Restraint System
is firmly secured. After installing a
Child Restraint System to the vehicle,
push and pull the Child Restraint
System forward and from side-
to-side to verify that it is securely
attached to the vehicle seat. A Child
Restraint System secured with a seat
belt should be installed as firmly as
possible. However, some side-to-side
movement can be expected.
When installing a Child Restraint
System, adjust the vehicle seat (up
and down, forward and rearward)
so that your child fits in the Child
Restraint System in a comfortable
manner.
• Secure the child in the Child
Restraint System. Make sure the
child is properly strapped in the Child
Restraint System according to the
Child Restraint System manufacturer’s
instructions.
WARNING
A Child Restraint System in a closed
vehicle can become very hot. To
prevent burns, check the seating
surface and buckles before placing
your child in the Child Restraint
System.

4-31
04
ISOFIX anchorage and top-tether
anchorage (ISOFIX system) for
children (if equipped)
The ISOFIX system holds a Child
Restraint System during driving and in
an accident. This system is designed
to make installation of the Child
Restraint System easier and reduce
the possibility of improperly installing
your Child Restraint System. The ISOFIX
system uses anchors in the vehicle and
attachments on the Child Restraint
System. The ISOFIX system eliminates
the need to use seat belts to secure the
Child Restraint System to the rear seats.
ISOFIX anchors are metal bars built into
the vehicle. There are two lower anchors
for each ISOFIX seating position that will
accommodate a Child Restraint System
with lower attachments.
To use the ISOFIX system in your
vehicle, you must have a Child Restraint
System with ISOFIX attachments. (An
ISOFIX-Child Restraint System may only
be installed if it has vehicle-specific or
universal approval in accordance with
the requirements of ECE-R 44 or ECE-R
129.)
The Child Restraint System manufacturer
will provide you with instructions on how
to use the Child Restraint System with its
attachments for the lower anchorages.
OLM039035OLM039035
ISOFIX anchorages have been provided
in the left and right outboard rear
seating positions. Their locations are
shown in the illustration. There are no
ISOFIX anchorages provided for the
center rear seating position.
WARNING
Do not attempt to install a Child
Restraint System using ISOFIX
anchorages in the rear center
seating position. There are no ISOFIX
anchorages provided for this seat.
Using the outboard seat anchorages,
for the CRS installation on the rear
center seating position, can damage
the anchorages which may break or fail
in a collision resulting in serious injury
or death.

4-32
Safety system
OAI3039016OAI3039016
The ISOFIX anchorages symbols are
located on the left and right rear seat
cushions to identify the position of the
ISOFIX anchorages in your vehicle (see
arrows in illustration).
OAI3039017OAI3039017
Both rear outboard seats are equipped
with a pair of ISOFIX anchorages as well
as a corresponding top-tether anchorage
on the back side of the rear seats.
(Child Restraint Systems with universal
approval according to ECE-R44 or
ECE-R129 need to be fixed additionally
with a top-tether connected to the
corresponding top-tether anchorage
point on the back side of the rear seats.)
ISOFIX anchorages are located between
the seatback and the seat cushion of the
rear seat left and right outboard seating
positions.
Securing a Child Restraint System
with the “ISOFIX system”
To install a ISOFIX-compatible Child
Restraint System in either of the rear
outboard seating positions:
1. Move the seat belt buckle away from
the ISOFIX anchorages.
2. Move any other objects away from
the anchors that could prevent a
secure connection between the Child
Restraint System and the ISOFIX
anchorages.
3. Place the Child Restraint System on
the vehicle seat, then attach the seat
to the ISOFIX anchorages according to
the instructions provided by the Child
Restraint System manufacturer.
4. Follow the instructions of the Child
Restraint System’s manufacturer for
proper installation and connection
of the ISOFIX attachments on the
Child Restraint System to the ISOFIX
anchorages.
WARNING
Take the following precautions when
using the ISOFIX system:
• Read and follow all installation
instructions provided with your Child
Restraint System.
• To prevent the child from reaching
and taking hold of unretracted
seat belts, buckle all unused rear
seat belts and retract the seat belt
webbing behind the child. Children
can be strangled if a shoulder belt
becomes wrapped around their neck
and the seat belt tightens.

4-33
04
• NEVER attach more than one
Child Restraint System to a single
anchorage. This could cause the
anchor or attachment to come loose
or break.
• Always have the ISOFIX system
inspected by your dealer after an
accident. An accident can damage
the ISOFIX system and may not
properly secure the Child Restraint
System.
Securing a Child Restraint System
with “Top-tether anchorage”
system (if equipped)
OBI3030004OBI3030004
First, secure the Child Restraint System
with the ISOFIX anchorages or the
seat belt. If the Child Restraint System
manufacturer recommends the top-
tether to be attached, attach and
tighten the top-tether to the top-tether
anchorage. Top-tether anchorages are
located on the back of the rear seats.
WARNING
Take the following precautions when
installing the top-tether:
• Read and follow all installation
instructions provided with your Child
Restraint System.
• NEVER attach more than one Child
Restraint System to a single top-
tether anchorage. This could cause
the anchorage or attachment to
come loose or break.
• Do not attach the top-tether to
anything other than the correct top-
tether anchorage. It may not work
properly if attached to something
else.
• Child Restraint System anchorages
are designed to withstand only those
loads imposed by correctly fitted
Child Restraint Systems. Under no
circumstances are they to be used for
adult seat belts or harnesses or for
attaching other items or equipment
to the vehicle.

4-38
Safety system
WARNING
• Even in vehicles with air bags, you
and your passengers must always
wear the safety belts provided
in order to minimize the risk and
severity of injury in the event of a
collision or rollover.
• SRS and pretensioners contain
explosive chemicals.
If scraping a vehicle without
removing SRS and pretensioners
from a vehicle, it may cause fire.
Before scraping a vehicle, we
recommend that you contact an
authorized Hyundai dealer.
• Keep the SRS parts and wirings away
from water or any liquid. If the SRS
components are inoperative due to
exposure to water or liquids, it may
cause fire or severe injury.
How does the air bag system
operate
• Air bags are activated (able to inflate
if necessary) only when the ignition
switch is placed to the ON or START
position.
• Air bags inflate instantly in the event
of serious frontal or side collision in
order to help protect the occupants
from serious physical injury.
• There is no single speed at which the
air bags will inflate.
Generally, air bags are designed to
inflate based upon the severity of a
collision and its direction. These two
factors determine whether the sensors
produce an electronic deployment/
inflation signal.
• Air bag deployment depends on a
number of factors including vehicle
speed, angles of impact and the
density and stiffness of the vehicles or
objects which your vehicle hits in the
collision. The determining, factors are
not limited to those mentioned above.
• The front air bags will completely
inflate and deflate in an instant.
It is virtually impossible for you to see
the air bags inflate during an accident.
It is much more likely that you
will simply see the deflated air
bags hanging out of their storage
compartments after the collision.

4-39
04
• In order to help provide protection
in a severe collision, the air bags
must inflate rapidly. The speed of
air bag inflation is a consequence
of extremely short time in which a
collision occurs and the need to get
the air bag between the occupant
and the vehicle structures before the
occupant impacts those structures.
This speed of inflation reduces the risk
of serious or life-threatening injuries
in a severe collision and is thus a
necessary part of air bag design.
However, air bag inflation can also
cause injuries which can include facial
abrasions, bruises and broken bones
because the inflation speed also
causes the air bags to expand with a
great deal of force.
• There are even circumstances under
which contact with the steering
wheel air bag can cause fatal
injuries, especially if the occupant is
positioned excessively close to the
steering wheel. WARNING
• To avoid severe personal injury or
death caused by deploying air bags
in a collision, the driver should sit as
far back from the steering wheel air
bag as possible. The front passenger
should always move their seat as far
back as possible and sit back in their
seat.
• Air bag inflates instantly in an event
of a collision, passengers may be
injured by the air bag expansion force
if they are not in a proper position.
• Air bag inflation may cause injuries
including facial or bodily abrasions,
injuries from broken glasses or burns.