2022 HYUNDAI I10 fuel

Modification to the original vehicle specification may invalidate the man-
ufacturers warranty and may adversely affect the safety and durability of
the vehicle.
Components which are subject to modification or are added to the origi-
nal vehicle specification without the express approval of the manufac-
turer and result in consequential loss or damage are not covered by the
vehicle manufacturers warranty.
Particular attention is drawn to the fitment of replacement road wheels
having a different specification to those installed in production. The elec-
tric power assisted steering system is specifically programmed to oper-
ate only with the road wheels fitted during production. The installation of
alternative specification road wheels may result in the replacement road
wheels fouling the vehicle body resulting in tyre damage and compro-
mised safety. The installation of after market wheels on vehicles
equipped with TPMS may result in wheel balancing difficulties or mal-
function of the TPMS system.
We recommend that you contact a HYUNDAI authorised repairer before
non original specification road wheels are installed.
CAUTION: MODIFICATIONS TO ORIGINAL VEHICLE
SPECIFICATION
This vehicle is fitted with electronically controlled fuel injection or other
micro processor controlled equipment.
It is possible for incorrectly installed two way radio equipment including
mobile telephones to adversely affect these systems.
Before radio equipment of this kind is installed, we recommend that you
contact your HYUNDAI authorised repairer for recommendation regard-
ing the suitability of the particular radio equipment concerned and the
recommended method of installation and equipment location. Incorrectly
installed or unsuitable equipment which gives rise to incorrect function-
ing of or damage to electronic vehicle components will not fall within the
scope of the vehicle manufacturers warranty.
TWO WAY RADIO INSTALLATION

1
1. Foreword
Foreword ..............................................................................................................1-2
Hyundai motor company ....................................................................................1-2
How to use this manual .......................................................................................1-3
Safety messages ..................................................................................................1-3
Fuel requirements ............................................................................................... 1-5
Petrol engine .................................................................................................... 1-5
Vehicle modifications .......................................................................................... 1-7
Vehicle break-in process .................................................................................... 1-8
Returning used vehicles ..................................................................................... 1-8

1-2
Foreword
FOREWORD
Congratulations, and thank you for choosing HYUNDAI.We are pleased to wel-
come you to the growing number of discerning people who drive HYUNDAIs.
We are very proud of the advanced engineering and high-quality construction
of each HYUNDAI we build.
Your Owner’s Manual will introduce you to the features and operation of your
new HYUNDAI. To become familiar with your new HYUNDAI, so that you can
fully enjoy it, read this Owner’s Manual carefully before driving your new vehi-
cle.
This manual contains important safety information and instructions intended to
familiarize you with your vehicle’s controls and safety features so you can safe-
ly operate your vehicle.
This manual also contains information on maintenance designed to enhance
safe operation of the vehicle. It is recommended that all service and mainte-
nance on your car be performed by a HYUNDAI authorised repairer.
HYUNDAI authorised repairers are prepared to provide high-quality service,
maintenance and any other assistance that may be required.
This Owner’s Manual should be considered a permanent part of your vehicle,
and should be kept in the vehicle so you can refer to it at any time. The manual
should stay with the vehicle if you sell it to provide the next owner with important
operating, safety and maintenance information.
HYUNDAI MOTOR COMPANY
CAUTION
Severe engine and transmission damage may result from the use of poor
quality fuels and lubricants that do not meet HYUNDAI specifications.
You must always use high quality fuels and lubricants that meet the spec-
ifications listed on Page 2-11 in the Vehicle Specifications section of the
Owner’s Manual.
Copyright 2019 HYUNDAI Motor Company. All rights reserved. No part of this
publication may be reproduced, stored in any retrieval system or transmitted in
any form or by any means without the prior written permission of HYUNDAI
Motor Company.

1-5
01
Petrol engine
Unleaded
For the optimal vehicle performance,
we recommend you use unleaded
petrol which has an octane rating of
RON (Research Octane Number) 95
/ AKI (Anti Knock Index) 91 or higher.
You may use unleaded petrol with an
octane rating of RON 91-94 / AKI
87-90 but it may result in slight perfor-
mance reduction of the vehicle. (Do
not use methanol blended fuels)
Your new vehicle is designed to
obtain maximum performance with
UNLEADED FUEL, as well as mini-
mise exhaust emissions and spark
plug fouling.
CAUTION
NEVER USE LEADED FUEL. The
use of leaded fuel is detrimental to
the catalytic converter and will
damage the engine control sys-
tem’s oxygen sensor and affect
emission control.
Never add any fuel system clean-
ing agents to the fuel tank other
than what has been specified (We
recommend that you consult a
HYUNDAI authorised repairer for
details.)
WARNING

1-6
Foreword
Vehicle damage or driveability prob-
lems may not be covered by the man-
ufacturer’s warranty if they result from
the use of:
1. Gasohol containing more than
10% ethanol.
2. Petrol or gasohol containing meth-
anol.
3. Leaded fuel or leaded gasohol.
CAUTION
Never use gasohol which contains
methanol. Discontinue use of any
gasohol product which impairs
drivability.
Other fuels
Using fuel additives such as:
- Silicone fuel additive
- MMT (Magnanese, Mn) fuel addi-
tive
- Ferrocene (iron-based) fuel addi-
tive
- Other metallic-based fuel additives
may result in cylinder misfire, poor
acceleration, engine stalling, damage
to the catalyst, or abnormal corro-
sion, and may cause damage to the
engine resulting in a reduction in the
overall life of the powertrain.
NOTICE
Damage to the fuel system or per-
formance problem caused by the
use of these fuels may not be cov-
ered by your New Vehicle Limited
Warranty.
Use of MTBE
HYUNDAI recommends avoiding
fuels containing MTBE (Methyl
Tertiary Butyl Ether) over 15.0% vol.
(Oxygen Content 2.7% weight) in
your vehicle.
Fuel containing MTBE over 15.0%
vol. (Oxygen Content 2.7% weight)
may reduce vehicle performance and
produce vapour lock or hard starting.
CAUTION
Your New Vehicle Limited Warranty
may not cover damage to the fuel
system and any performance prob-
lems that are caused by the use of
fuels containing methanol or fuels
containing MTBE (Methyl Tertiary
Butyl Ether) over 15.0% vol.
(Oxygen Content 2.7% weight.)
Do not use methanol
Fuels containing methanol (wood
alcohol) should not be used in your
vehicle. This type of fuel can reduce
vehicle performance and damage
components of the fuel system,
engine control system and emission
control system.

1-7
01
Fuel Additives
HYUNDAI recommends that you use
unleaded petrol which has an octane
rating of RON (Research Octane
Number) 95 / AKI (Anti Knock Index)
91 or higher (for Europe) or Octane
Rating of RON (Research Octane
Number) 91 / AKI (Anti-Knock Index)
87 or higher (except Europe).
For customers who do not use good
quality petrols including fuel additives
regularly, and have problems starting
or the engine does not run smoothly,
one bottle of additive added to the
fuel tank according to the mainte-
nance schedule is recommended
(refer to chapter 8, “Normal
Maintenance Schedule”).
Additives are available from your
HYUNDAI authorised repairer along
with information on how to use them.
Do not mix other additives.
Operation in foreign countries
If you are going to drive your vehicle
in another country, be sure to:

Exterior overview (I)............................................................................................ 2-2
Exterior overview (II) .......................................................................................... 2-3
Interior overview ................................................................................................. 2-4
Instrument panel overview ................................................................................ 2-5
Engine compartment ......................................................................................... 2-7
Dimensions .........................................................................................................2-8
Engine specification ...........................................................................................2-8
Bulb wattage .......................................................................................................2-9
Tyres and wheels............................................................................................... 2-10
Air conditioning system..................................................................................... 2-11
Tyre load and speed capacity ........................................................................... 2-11
Gross vehicle weight ......................................................................................... 2-11
Luggage volume ................................................................................................ 2-11
Recommended lubricants and capacities .......................................................2-12
Recommended SAE viscosity number .........................................................2-13
Vehicle identification number (VIN) .................................................................2-14
Vehicle certification label ..................................................................................2-14
Tyre specification and pressure label ...............................................................2-15
Engine number ..................................................................................................2-15
Air conditioner compressor label .................................................................... 2-16
Fuel label ........................................................................................................... 2-16
Declaration of conformity ................................................................................. 2-17
2. Vehicle information
2

2-12
Vehicle information
RECOMMENDED LUBRICANTS AND CAPACITIES
To help achieve proper engine and powertrain performance and durability, use
only lubricants of the proper quality. The correct lubricants also help promote
engine efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
Lubricant Volume Classification
Engine oil *1 *2
(drain and refill)
1.0 MPI 3.1 l (2.73 lmp qt.)
API Latest (SN Plus)
1.2 MPI 3.4 l (2.99 lmp qt.)
Manual Transmission fluid1.3~1.4 l
(1.21~1.23 lmp qt.)API Serviced GL-4, SAE 70W, TGO-9
(HYUNDAI genuine transmission
fluid)
- HK SYN MTF 70W
- SPIRAX S6 GHME 70W MTF
- GS MTF HD 70W
Automated Manual
Transmission fluid1.3~1.4 l
(1.21~1.23 lmp qt.)API Serviced GL-4, SAE 70W, TGO-9
(HYUNDAI genuine transmission
fluid)
- HK SYN MTF 70W
- SPIRAX S6 GHME 70W MTF
- GS MTF HD 70W
Coolant1.0 MPI4.49 l
(3.95 lmp qt.)MIXTURE, Antifreeze with water
(Ethylene glycol base coolant for
aluminium radiator)
1.2 MPI4.77 l
(4.20 lmp qt.)
Brake/Clutch fluid0.7~0.8 l
(0.62~0.7 lmp qt.)FMVSS116 DOT-4
Fuel 36 l (7.92 lmp gal.) -
*1 : Refer to the recommended SAE viscosity numbers on the next page.
*
2 : Engine oils labelled Energy Conserving Oil are now available. Along with other additional benefits, they con-
tribute to fuel economy by reducing the amount of fuel necessary to overcome engine friction. Often, these
improvements are difficult to measure in everyday driving, but in a year’s time, they can offer significant cost
and energy savings.