Page 7 of 486

1
1. Foreword
Foreword ..............................................................................................................1-2
Hyundai motor company ....................................................................................1-2
How to use this manual .......................................................................................1-3
Safety messages ..................................................................................................1-3
Fuel requirements ............................................................................................... 1-5
Petrol engine .................................................................................................... 1-5
Vehicle modifications .......................................................................................... 1-7
Vehicle break-in process .................................................................................... 1-8
Returning used vehicles ..................................................................................... 1-8
Page 66 of 486

3-34
Safety system
Securing a Child Restraint
System with the “ISOFIX
Anchorage System”
To install a ISOFIX-compatible Child
Restraint System in either of the rear
outboard seating positions:
1. Move the seat belt buckle away
from the ISOFIX anchorages.
2. Move any other objects away from
the anchors that could prevent a
secure connection between the
Child Restraint System and the
ISOFIX anchorages.
3. Place the Child Restraint System
on the vehicle seat, then attach the
seat to the ISOFIX anchorages
according to the instructions pro-
vided by the Child Restraint
System manufacturer.
4. Follow the instructions of the Child
Restraint System’s manufacturer
for proper installation and connec-
tion of the ISOFIX attachments on
the Child Restraint System to the
ISOFIX anchorages.
WARNING
Take the following precautions
when using the ISOFIX system:
‡ Read and follow all installation
instructions provided with your
Child Restraint System.
‡ To prevent the child from reach-
ing and taking hold of unretract-
ed seat belts, buckle all unused
rear seat belts and retract the
seat belt webbing behind the
child. Children can be strangled
if a shoulder belt becomes
wrapped around their neck and
the seat belt tightens.
‡ NEVER attach more than one
Child Restraint System to a sin-
gle anchorage. This could cause
the anchor or attachment to
come loose or break.
‡ Always have the ISOFIX system
inspected by your dealer after an
accident. An accident can dam-
age the ISOFIX system and may
not properly secure the Child
Restraint System.
Page 67 of 486

3-35
03
Securing a Child Restraint
System seat with “Top-tether
Anchorage” system
OAC3039011TU
Top-tether anchorages for Child
Restraint Systems are located on the
rear of the seatback.
OAC3039012TU
1. Route the Child Restraint System
seat strap over the seatback.
For vehicles with adjustable head
restraint, route the tether strap
under the head restraint and
between the head restraint posts,
otherwise route the tether strap
over the top of the seatback.
2. Connect the top-tether to the top-
tether anchorage, then tighten the
top-tether according to the instruc-
tions of your Child Restraint
System’s manufacturer to firmly
attach the Child Restraint System
to the seat.
WARNING
Take the following precautions
when installing the top-tether:
‡ Read and follow all installation
instructions provided with your
Child Restraint System.
‡ NEVER attach more than one
Child Restraint System to a sin-
gle ISOFIX top-tether anchorage.
This could cause the anchorage
or attachment to come loose or
break.
‡ Do not attach the top-tether to
anything other than the correct
top-tether anchorage. It may not
work properly if attached to
something else.
‡ Child Restraint anchorages are
designed to withstand only those
loads imposed by correctly fitted
Child Restraint System.
Under no circumstances are they
to be used for adult seat belts or
harnesses or for attaching other
items or equipment to the vehi-
cle.
Page 79 of 486