2022 HYUNDAI ELANTRA N lights

Instrument Cluster4-24
Low fuel
This warning message is displayed if the
fuel tank is almost out of fuel.
When this message is displayed, the low
fuel level warning light in the cluster will
come on.
It is recommended to look for the nearest
fueling station and refuel as soon as
possible.
Engine Overheated (if equipped)
This warning message is displayed
when the engine coolant temperature
is above 248°F (120°C). This means that
the engine is overheated and may be
damaged.
If your vehicle is overheated, refer to
“Overheating” in chapter 8.
Check headlight (High) (if equipped)
This warning message is displayed if the
headlamps are not operating properly.
In addition, if a specific lamp(turn signal
lamp etc.) is not operating properly, the
warning message according to a specific
lamp (turn signal lamp etc.) is displayed.
A corresponding bulb may need to be
replaced.
Make sure to replace the burned out
bulb with a new one of the same wattage
rating.
Check headlight (Low) (if equipped)
This warning message is displayed if
the headlamp (Low) are not operating
properly.
In addition, if a specific lamp(turn signal
lamp etc.) is not operating properly, the
warning message according to a specific
lamp (turn signal lamp etc.) is displayed.
A corresponding bulb may need to be
replaced.
Make sure to replace the burned out
bulb with a new one of the same wattage
rating
Check turn signal (if equipped)
This warning message is displayed if
the turn signal lamps are not operat-
ing properly. A lamp may need to be
replaced.
Make sure to replace the burned out
bulb with a new one of the same wattage
rating.
Check brake light (if equipped)
This warning message is displayed if the
stop lamps are not operating properly. A
lamp may need to be replaced.
Make sure to replace the burned out
bulb with a new one of the same wattage
rating.
Check daytime running light (if
equipped)
This warning message is displayed
if the daytime running lights are not
operating properly. A lamp may need to
be replaced.
Make sure to replace the burned out
bulb with a new one of the same wattage
rating.
Check high mounted brake light (if
equipped)
This warning message is displayed if
the high mounted stop lamp are not
operating properly. A lamp may need to
be replaced.
Make sure to replace the burned out
bulb with a new one of the same wattage
rating.
Check headlight LED (if equipped)
This warning message is displayed
if there is a problem with the LED
headlight. We recommend that you have
the vehicle inspected by an authorized
HYUNDAI dealer.
CN7 N HMA 4.indd 4-24 2021-09-14  9:32:43

04
4-31
User Settings Mode
OCN7040038LOCN7040038L
In this mode, you can change the
settings of the instrument cluster, doors,
lamps, etc.
1. Driver assistance
2. Door
3. Lights
4. Sound
5. Convenience
6. Service interval
7. Theme selection
8. Other
9. Language
10. Reset
The information provided may differ
depending on which functions are
applicable to your vehicle.Shift to P to edit settings / Engage parking
brake to edit settings
This warning message illuminates if
y

ou try to select an item from the User
Settings mode while driving.
• Dual clutch transmission
For your safety, change the User
Settings after parking the vehicle,
applying the parking brake and
moving the shift level to P(Park).
• Manual transmission
For your safety, change the User
Settings after engaging the parking
brake.
Quick guide (Help)
This mode provides quick guides for the
s
ystems in the User Settings mode.
Select an item, press and hold the OK
button.
For more details about each system,
refer to this Owner’s Manual.
Information
When the infotainment system is applied,
only the User’s Setting mode on the
infotainment system is supported but the
User’s Setting mode on the instrument
cluster is not supported.
CN7 N HMA 4.indd 4-31 2021-09-14  9:32:56

04
4-33
2. Door
ItemsExplanation
Auto Lock• Enable on Shift: All doors will be automatically locked if the
automatic transmission/dual clutch transmission shift lever is
moved from the P (Park) position to the R (Reverse), N (Neutral), or
D (Drive) position. (Only when the engine is running)
• Enable on Speed: All doors will be automatically locked when the vehicle speed exceeds 9.3mph (15km/h).
• Disable : The auto door lock operation will be deactivated.
Auto Unlock • On Shift to P: All doors will be automatically unlocked if the
automatic transmission/dual clutch transmission shift lever is
moved to P (Park) position. (Only when the engine is running)
• On key out/Vehicle Off : All doors will be automatically unlocked. When the Engine Start/Stop button is set to the OFF position.
• Disable : The auto door unlock operation will be canceled.
Two Press Unlock
• Off: The two press unlock function will be deactivated. Therefore, all doors will unlock if the door unlock button is pressed.
• On: Only the driver’s door will unlock if the door unlock button is pressed. When the door unlock button is pressed again within 4
seconds, the remaining doors will unlock.
Smart TrunkTo activate or deactivate the smart trunk.
For more details, refer to “Smart trunk” in chapter 5.
3. Lights
Items Explanation
IlluminationTo adjust the illumination level.
- Level 1~20
One Touch
Turn Signal • Off: The one touch turn signal function will be deactivated.
• 3, 5, 7 Flashes: The turn signal indicator will blink 3, 5, or 7 times
when the turn signal lever is moved slightly.
For more details, refer to “Lighting” in chapter 5.
Headlight Delay• To activate or deactivate the headlamp delay function.
For more details, refer to “Lighting” in chapter 5.
High Beam Assist• To activate or deactivate High Beam Assist.
For more details, refer to “High Beam Assist (HBA)” in chapter 5.
CN7 N HMA 4.indd 4-33 2021-09-14  9:32:57

Instrument Cluster4-34
4. Sound
Items Explanation
Cluster
Voice
Guidance Volume To adjust the cluster voice guidance volume.
Welcome sound To activate or deactivate the welcome sound.
5. Convenience
Items Explanation
Seat Easy
Access • Off: The seat easy access function is deactivated.
• Normal/Extended: When you turn off the engine, the driver’s seat
will automatically move rearward short (Normal) or long (Extended)
for you to enter or exit the vehicle more comfortably.
For more details, refer to “Driver Position Memory System” in
chapter 5.
Rear
Occupant Alert • To activate or deactivate the rear occupant alert system.
For more details, refer to “Rear Occupant Alert (ROA)" in chapter 5.
Welcome
Mirror/Light • On door unlock: The outside rearview mirrors are unfolded and the
welcome light turns on automatically when the doors are unlocked.
• On driver approach: The outside rearview mirrors are unfolded and the welcome light turns on automatically when the vehicle is
approached with the smart key.
For more details, refer to ‘’Welcome System’’ in chapter 5.
Wireless
Charging System To activate or deactivate the wireless charging system in the front seat.
For more details, refer to “Wireless cellular phone charging system”
in chapter 5.
Wiper/Lights Display To activate or deactivate the Wiper/ Light mode.
When activated, the LCD display shows the selected Wiper/Light mode
whenever you changed the mode.
Icy Road Warning To activate or deactivate the icy road warning function.
CN7 N HMA 4.indd 4-34
2021-09-14  9:32:57

5
Hood ....................................................................\
......................................... 5-56
Trunk ...................................................................\
.......................................... 5-58
Emergency Trunk Safety Release ........................................................................\
.. 5-59
Smart Trunk Release ........................................................................\
......................5-60
Fuel Filler Door ........................................................................\
..................... 5-63
Exterior Lights ........................................................................\
...................... 5-65
Lighting Control......................................................................\
................................ 5-65
High Beam Operation ........................................................................\
.................... 5-66
Turn Signals And Lane Change Signals ................................................................. 5-67
Battery Saver Function ................................................................\
..........................5-68
Headlamp Delay Function ........................................................................\
.............5-68
High Beam Assist (HBA) ........................................................................\
.....5-69Detecting Sensor ........................................................................\
............................ 5-69
High Beam Assist Settings ........................................................................\
............. 5-69
High Beam Assist Operation ........................................................................\
.......... 5-69
High Beam Assist Malfunction and Limitations ................................................... 5-70
Interior Lights ........................................................................\
....................... 5-72Interior Lamp AUTO Cut........................................................................\
..................5-72
Front Lamps ........................................................................\
.....................................5-72
Rear Lamp ........................................................................\
........................................5-73
Luggage Compartment Lamp ........................................................................\
........5-74
Vanity Mirror Lamp ........................................................................\
..........................5-74
Welcome System ........................................................................\
.............................5-75
Wipers and Washers ........................................................................\
............ 5-76Windshield wipers ........................................................................\
.......................... 5-76
Windshield Washers ........................................................................\
........................ 5-77
Manual Climate Control System ................................................................ 5-78Heating and Air Conditioning ........................................................................\
........ 5-79
System Operation ........................................................................\
........................... 5-85
System Maintenance ........................................................................\
..................... 5-87
Automatic Climate Control System ............................................................5-89Automatic Heating and Air Conditioning .............................................................5-90
Manual Heating and Air Conditioning ...................................................................5-91
System Operation ........................................................................\
........................... 5-97
System Maintenance ........................................................................\
..................... 5-99
CN7 N HMA 5.indd 5-22021-09-06  3:06:09

Convenience Features5-4
OCN7N051005NOCN7N051005N
Your HYUNDAI uses a Smart Key, which
you can use to lock or unlock a door (and
trunk) and even start the engine.
1. Door Lock
2. Door Unlock
3. Remote start
4. Trunk Unlock
5. Panic
Locking
OCN7N051078LOCN7N051078L
To lock :
1. Close all doors, engine hood and trunk.
2. Carry the smart key.
3. Either press the door handle button or press the Door Lock button (1) on the
smart key.
4. The hazard warning lights will blink. Also, the outside rearview mirror
will fold, if ‘Convenience → Welcome
mirror/light → On door unlock’ is
selected from the User Settings mode
on the LCD display. For more details,
refer to “LCD Display” in chapter 4.
5. Make sure the doors are locked by pulling the door outside handle.
Information
The door handle button will only operate
when the smart key is within 28~40 in.
(0.7~1 m) from the outside door handle.
SMART KEY
CN7 N HMA 5.indd 5-4 2021-09-06  3:06:09

05
5-5
Even though you press the outside
door handle button, the doors will not
lock and the chime will sound for three
seconds if any of the following occur:
• The Smart Key is in the vehicle.
• The Engine Start/Stop button is in ACC or ON position.
• Any door except the trunk is open.
WARNING
Do not leave the Smart Key in your
vehicle with unsupervised children.
Unattended children could press the
Engine Start/ Stop button and may
operate power windows or other
controls, or even make the vehicle
move, which could result in serious
injury or death.
Unlocking your vehicle
(When the Two Press Unlock
feature is off)
Button typeButton type
OCN7050078OCN7050078
Touch sensor typeTouch sensor type
OCN7050093NOCN7050093N
1. Make sure you have the smart key in your possession.
2. Press the Door Unlock button (2) on the smart key, press the button on the
front door handle or touch the door
unlock sensor inside of the front door
handle to unlock the doors.
3. All of the doors will unlock. When the doors unlock, the hazard warning
lights will blink two times.
• The door handle button will only operate when the smart key is within
28~40 inches (0.7~1 m) from the
outside door handle.
• If you do not open the door after unlocking within 30 seconds, it will
return to the lock mode.
• If you unlocked the door with the door handle, the doors cannot be locked
with the sensor for up to 2 seconds.
CN7 N HMA 5.indd 5-5 2021-09-06  3:06:10

Convenience Features5-6
Unlocking your vehicle
(When the Two Press Unlock
feature is on)
1. Make sure you have the smart key in your possession.
2. Press the Door Unlock button (2) on the smart key, press the button on the
front door handle or touch the door
unlock sensor inside of the front door
handle to unlock the doors.
3. The driver’s door will unlock.
4. If you press the button on the front door handle or touch the door unlock
sensor inside of the front door handle
to unlock the doors within 4 seconds,
all of the doors unlock. When the
doors unlock, the hazard warning
lights will blink two times.
• The door handle button will only operate when the smart key is within
28~40 inches (0.7~1 m) from the
outside door handle.
• If you do not open the door after unlocking within 30 seconds, it will
return to the lock mode.
• The factory default setting is in off mode so you should set in the User’s
Settings mode.
• If you unlocked the door with the door handle, the doors cannot be locked
with the sensor for up to 2 seconds. Two Press Unlock Feature
The priority for unlocking the driver door
only, or unlocking all the doors with
one press may be adjusted in the User
Settings mode in the cluster LCD display.
The Two Press Unlock feature, when
enabled, will require the user to press
the door unlock button once for driver
door only and twice for unlocking all the
doors.
Select or Deselect the Two Press Unlock
feature in the User Settings mode in the
cluster LCD display. The option can be
found under the following menu:
User Settings → Door → Two Press Unlock
Information
If you press the front passenger outside
door handle with the smart key in your
possession, all the doors will unlock.
CN7 N HMA 5.indd 5-6
2021-09-06  3:06:10