2022 HYUNDAI ELANTRA N engine

2-7
02
2.0 T-GDi2.0 T-GDi
The actual engine compartment in the vehicle may differ from the illustration.
OCN7N091001 OCN7N091001
1. Engine coolant reservoir .......................9-18
2. Brake/clutch fluid reservoir ................. 9-22
3. Air cleaner ............................................. 9-24
4. Engine oil dipstick ................................. 9-15
5. Engine oil filler cap ................................ 9-156. Windshield washer fluid reservoir ....... 9-23
7. Fuse box ................................................ 9-48
8. Battery ................................................... 9-30
9. Engine coolant cap ................................ 9-19
ENGINE COMPARTMENT
CN7 N HMA 2.indd 2-7
2021-09-14  9:30:00

2-8
Vehicle Information, Consumer Information and Reporting Safety Defects
Items
in. (mm)
Overall length 184
.05 (4,675)
Overall width 71.85 (1,825)
Overall height 55.71 (1,415)
Front tread 245/35 ZR19 62.36 (1,584)
Rear tread 245/35 ZR19 62.17 (1,579)
Wheelbase 107.09 (2,720)
ENGINE SPECIFICATION
Item2.0 T-GDi
Displacement cu. in. (
cc) 121.9 (1,998)
Bore x Stroke in. (mm)3.39 X 3.39 (86.0 X 86.0)
Firing order 1-3-4-2
No. of cylinders 4, in-line
DIMENSIONS
CN7 N HMA 2.indd 2-8 2021-09-14  9:30:01

Vehicle Information, Consumer Information and Reporting Safety Defects2-12
RECOMMENDED LUBRICANTS AND CAPACITIES
To help achieve proper engine and powertrain performance and durability, use only
lubricants of the proper quality. The correct lubricants also help promote engine
efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
Lubricant Volume
Engine oil
*1 *2
(drain and refill) Recommends 5.49 US qt. (5.2 ℓ) SAE 0W-30 API SN PLUS/SP or
ILSAC GF-6
*3
Manual transmission fluid
1.9 ~ 2.0 US qt.
(1.8 ~ 1.9 ℓ) HK SYN MTF 70W (SK)
SPIRAX S6 GHME 70W MTF
(H.K.SHELL)
GS MTF HD 70W (GS CALTEX)
(API GL-4, SAE 70W, TGO-9)
Dual clutch
transmission
fluid Gear oil
3.4 ~ 3.6 US qt.
(3.3 ~ 3.4 ℓ) GS WDCTF HD G (WDGO-1)
Control oil 2.58 ~ 2.64 US qt.
(2.45 ~ 2.5 ℓ) GS WDCTF HD H (WDHO-1)
Coolant 8.12 US qt.
(7.68 ℓ) Mixture of antifreeze and water
(Phosphate-based Ethylene glycol
coolant for aluminum radiator)
Brake/clutch fluid
*40.74 ~ 0.85 US qt. (0.7 ~ 0.8 ℓ) DOT-4
Fuel 12.42 US gal.
(47 ℓ) Refer to “Fuel requirements” in the
chapter 1.
*1 : Refer to the recommended SAE viscosity numbers on the next page.
*2 : Engine oils labeled Energy Conserving Oil are now available. Along with other additional
benefits, they contribute to fuel economy by reducing the amount of fuel necessary
to overcome engine friction. Often, these improvements are difficult to measure in
everyday driving, but in a year’s time, they can offer significant cost and energy savings.
*3 : Requires < API SN PLUS (or above) Full synthetic> grade engine oil. If a lower grade
engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine
oil filter must be replaced as indicated severe maintenance condition.
*4 : For the best performance of braking and ABS/ESC functions, you should use genuine
brake fluid that conform to standards. (Standards: SAE J1704 DOT-4 LV, ISO4925 CLASS-6
and FMVSS116 DOT-4)
CN7 N HMA 2.indd 2-12
2021-09-14  9:30:01

02
2-13
Recommended SAE viscosity number
CAUTION
Always be sure to clean the area around any filler plug, drain plug, or dipstick before
checking or draining any lubricant. This is especially important in dusty or sandy
areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick
areas will prevent dirt and grit from entering the engine and other mechanisms that
could be damaged.
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather
operating (engine start and engine oil flowability). Lower viscosity engine oils can
provide better fuel economy and cold weather performance, however, higher viscosity
engine oils are required for satisfactory lubrication in hot weather. Using oils of any
viscosity other than those recommended could result in engine damage.
When choosing an oil, consider the range of temperature your vehicle will be operated
in before the next oil change.
Proceed to select the recommended oil viscosity from the chart.
Temperature Range for SAE Viscosity Numbers
Temperature °F -30 -20 -10 0 10 20 30 40 50
(°C) -10 0 20 40 60 80 100 120
2.0 T-GDi
0W-30 0W-30
For better fuel economy, it is recommended to use the engine oil of a viscosity grade
SAE 0W30 API SN PLUS / SP or ILSAC GF-6.
An engine oil displaying this American Petroleum Institute (API)
Certification Mark conforms to the International Lubricant
Specification Advisory Committee (ILSAC). It is recommended to
only use engine oils that uphold this API Certification Mark.
CN7 N HMA 2.indd 2-13 2021-09-14  9:30:01

02
2-15
OPDEN087012 OPDEN087012
The engine number is stamped on the
engine block as shown in the drawing.
AIR CONDITIONER
COMPRESSOR LABEL
OIG019029LOIG019029L
A compressor label informs you the type
of compressor your vehicle is equipped
with such as model, supplier part
number, production number, refrigerant
(1) and refrigerant oil (2).
ENGINE NUMBERAIR CONDITIONING
REFRIGERANT LABEL
OCN7N011021NOCN7N011021N
The refrigerant label provides
information such as refrigerant type and
amount. (R-1234yf)
CN7 N HMA 2.indd 2-15 2021-09-14  9:30:02

03
3-7
Rear seats
WARNING
Take the following precautions:
• Adjusting the seats
- NEVER attempt to adjust the seat
while the vehicle is moving. The
seat may suddenly move and may
injure the passenger.
- Make sure that the seat is locked in
place after the adjustment. If not,
the seat might move unexpectedly
resulting in an accident.
• Folding the seats
- Do not fold the seatback when
the seat is occupied (for example,
passenger, pets or luggage). It
may injure the passenger or pet, or
damage the luggage.
- Never allow passengers to sit on
top of the folded down seatback
while the vehicle is moving. This is
not a proper seating position and
no seat belts are available for use.
This could result in serious injury
or death in case of an accident or
sudden stop.
- Objects carried on the folded
down seatback should not extend
higher than the top of the front
seatbacks. This could allow cargo
to slide forward and cause injury or
damage during sudden stops. -
When returning the rear seatback
from a folded to an upright
position, hold the seatback and
return it slowly. Ensure that the
seatback is completely locked into
its upright position by pushing
on the top of the seatback. In
an accident or sudden stop, the
unlocked seatback could allow
cargo to move forward with great
force and enter the passenger
compartment, which could result
in serious injury or death.
• Loading cargo
- Make sure the engine is off, the
gear is in R (Reverse) or 1st gear
(for manual transmission vehicle)
or in P (Park, for dual clutch
transmission vehicle), and the
parking brake is securely applied
whenever loading or unloading
cargo. Failure to take these steps
may allow the vehicle to move
if the shift lever is inadvertently
moved to another position.
- When cargo is loaded through
the rear passenger seats, ensure
the cargo is properly secured
to prevent it from moving while
driving.
• Do not place objects in the rear
seats, since they cannot be properly
secured and may hit vehicle
occupants in a collision causing
serious injury or death.
CN7 N HMA 3.indd 3-7 2021-09-06  2:24:26

Seats & Safety System3-12
OCN7N031024OCN7N031024
While the engine is running, push either
of the switches to warm the driver’s seat
or front passenger’s seat.
During mild weather or under conditions
where the operation of the seat warmer
is not needed, keep the switches in the
OFF position.
• Manual temperature control Each time you push the switch, the
temperature setting of the seat is
changed as follows:

- Front seat
OFF
LOW ( )HIGH ( )
MIDDLE ( )
• Automatic temperature control The seat warmer starts to
automatically control the seat
temperature in order to prevent
low-temperature burns after being
manually turned ON.

- Front seat
OFF
Ÿ

 

¡
¢0,1
0,1
LOW ( )+,*+
0,''/(
You may manually press the switch to
increase seat temperature. However, it
soon returns the automatic mode again.
• When pressing the switch for more
than 1.5 seconds with the seat warmer
operating, the seat warmer will turn
OFF.
• The seat warmer defaults to the OFF position whenever the Engine
Start/ Stop button is pressed to the
ON position. However, if the Auto
Comfort Control function is ON, the
driver’s seat warmer will turn on
and off depending on the ambient
temperature.
• Auto Comfort Control (for driver’s seat, if equipped)
The seat warmer automatically
controls the seat temperature
depending on the ambient
temperature when the engine is
running. If the seat warmer switch
is pushed, the seat warmer will have
to be controlled manually.To use this
function, it must be activated from
the Settings menu in the AVN system
screen. For more details, refer to the
separately supplied Car Infotainment
System manual.
CN7 N HMA 3.indd 3-12 2021-09-06  2:24:27

Seats & Safety System3-14
Seat Belt Warning Light
Seat belt warning
Instrument cluster Instrument cluster (Driver and front passenger’s seat)(Driver and front passenger’s seat)
1GQA20831GQA2083
Driver’s and Passenger’s front seat belt
warning
As a reminder, the seat belt warning
light will illumina
te for approximately 6
seconds each time you set the ENGINE
START/STOP button ON regardless of
belt fastening. If the seatbelt is not
fastened, the warning chime will sound
for about 6 seconds.
If you start to drive without the seat
belt fastened over approximately 5 mph
(9 km/h) and less than approximately
12 mph (20 km/h), the corresponding
warning light will illuminate. The warning
light will turn off when the vehicle speed
drops below approximately 5 mph (9
km/h).
If you start to drive without the seat belt
fastened or you unfasten the seat belt
when you drive approximately 12 mph
(20 km/h) and faster, the warning light
will blink and warning chime will sound
for approximately 100 seconds.
When the seat belt is unfastened
during driving, the warning light will
illuminate when the speed is over
approximately 5 mph (9 km/h) and less
than approximately 12 mph (20 km/h).
When the speed is approximately 12 mph
(20 km/h) and faster, the warning light
will blink and warning chime will sound
for approximately 100 seconds.
Seat Belt Restraint System
WARNING
Improperly positioned seat belts may
increase the risk of serious injury
in an accident. Take the following
precautions when adjusting the seat
belt:
• Position the lap portion of the seat
belt as low as possible across your
hips, not on your waist, so that it fits
snugly.
• Position one arm under the shoulder
belt and the other over the belt, as
shown in the illustration.
• Always position the shoulder belt
anchor into the locked position at the
appropriate height.
• NEVER position the shoulder belt
across your neck or face.
CN7 N HMA 3.indd 3-14 2021-09-06  2:24:28