2022 FORD MUSTANG brake rotor

Powertrain
•
5.0L, 302 cubic inch DOHC V8 engine
with Ti-VCT (Twin independent
Variable Camshaft Timing). Aluminum
engine block and cylinder heads.
• 480 hp @ 7,000 RPM; 420 lb-ft @
4,600 RPM.
• Forged steel cross-plane crankshaft
and connecting rods, cast aluminum
pistons, 12.0:1 compression ratio.
• GT350 87 mm large-bore electronic
throttle body and cold air intake with
exposed air filter element.
• Tubular exhaust manifolds.
• Auxiliary engine oil, transmission and
differential fluid coolers.
• Active valve performance exhaust
system with 4.5 inch polished tips. •
Tremec 3160 6-speed manual
transmission with active rev-match
and white shift knob. 10-speed
automatic transmission with upgraded
torque converter and steering wheel
paddle shifters available.
• 3.73 (3.55 export markets) Torsen rear
differential with Tremec 6-speed
manual transmission. 3.55 Torsen rear
differential with 10-speed automatic
transmission.
Chassis
• MacPherson strut with double
ball-joint front suspension.
• Front adjustable strut top mounts
(with optional Handling Package).
• Integral-link, independent rear
suspension with cross-axis joints.
• Electronic power assisted steering
system (EPAS) with three unique,
customer selectable steering modes
(Comfort, Normal, Sport).
• Black painted Brembo 6-piston
aluminum front brake calipers with 380
mm one-piece vented front brake
rotors (red or orange painted calipers
available).
7
2022 Mustang (CZG) Mach 1, enUSA, Edition date: 202110, First-Printing At a GlanceE343941

•
Black painted single-piston cast iron
rear brake calipers with 330 mm
one-piece vented rear brake rotors (red
and orange painted calipers available).
• 19 x 9.5-inch front and 19 x 10.0-inch
rear wheels with P255/40R19 front and
P275/40R19 rear summer tires.
• 19 x 10.5-inch front and 19 x 11.0-inch
rear wheels with P305/30R19 front and
P315/30R19 rear Michelin Pilot Sport
Cup 2 tires (with optional Handling
Package).
• Electronic line lock (track use only).
• Programmable launch control (manual
transmission; track use only).
• Five selectable drive modes (Normal,
Snow/Wet, Sport, Drag, Track).
• Unique stability control, EPAS and ABS
tuning.
• Monotube dampers with MagneRide
electronic damping control (unique
calibration included with optional
Handling Package).
Exterior
• Unique front fascia with GT350
incandescent park/turn lamps, lower
side openings and grilles for increased
engine and transmission cooling.
• Unique front bellypan for improved
aerodynamics.
• Satin black with red, orange or white
unique hood and side stripes.
• Low gloss magnetic accents including
front Mustang badge, rear spoiler and
exterior mirror caps.
• GT500 rear fascia.
• Unique decklid and fender badges.
• GT350 rear spoiler with Gurney flap
(with optional Handling Package). Interior
•
12 inch digital instrument cluster with
unique start up graphic.
• 8 inch center stack screen with SYNC
3.
• Navigation system (if equipped).
• Dark Spindrift aluminum instrument
panel accents and integrated chassis
number badge.
• Track Apps (track use only). Includes
acceleration timer, accelerometer,
brake performance, lap timer, launch
control (manual transmission only)
and electronic line lock.
• Unique door sill plates.
• Dual-zone electronic climate control.
• Recaro front seats (if equipped).
• Rear seat delete (with optional
Handling Package only).
8
2022 Mustang (CZG) Mach 1, enUSA, Edition date: 202110, First-Printing At a Glance

WHEELS
Your vehicle has unique wheels matched
to the tires. These wheels are more
susceptible to damage due to their
diameter, width and low profile tires.
To avoid damage to your wheels:
•
Maintain proper tire pressure (see Tires
in this supplement).
• When installing wheels, always torque
lug nuts to specification with a torque
wrench.
• Inspect your wheels for damage on a
regular basis. If a wheel is damaged,
replace it immediately.
• In the event that you encounter an
abnormally harsh impact, inspect the
outer diameter of your wheels, both
inside and out, for damage.
Use Motorcraft™ Wheel and Tire Cleaner
to maintain your wheels. See your Owner ’s
Manual for information on other cleaning
products and vehicle care. Wheel Lug Nut Torque
Specifications WARNING: When you install a
wheel, always remove any corrosion, dirt
or foreign materials present on the
mounting surfaces of the wheel or the
surface of the wheel hub, brake drum or
brake disc that contacts the wheel. Make
sure to secure any fasteners that attach
the rotor to the hub so they do not
interfere with the mounting surfaces of
the wheel. Installing wheels without
correct metal-to-metal contact at the
wheel mounting surfaces can cause the
wheel nuts to loosen and the wheel to
come off while your vehicle is in motion,
resulting in loss of vehicle control,
personal injury or death.
Retighten the lug nuts to the specified
torque at
500 mi (800 km) after any
wheel disturbance (tire rotation, changing
a flat tire or wheel removal). lb-ft (Nm)*
Bolt Size
150 ± 15 (200 ± 20)
M14 x 1.5
*Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford
recommended replacement fasteners.
TIRES WARNING:
Only use replacement
tires and wheels that are the same size,
load index, speed rating and type (such
as P-metric versus LT-metric or
all-season versus all-terrain) as those
originally provided by Ford. The
recommended tire and wheel size may
be found on either the Safety
Compliance Certification Label (affixed to either the door hinge pillar, door-latch
post, or the door edge that meets the
door-latch post, next to the driver's
seating position), or the Tire Label which
is located on the B-Pillar or edge of the
driver's door. If this information is not
found on these labels, then you should
contact your authorized dealer as soon
52
2022 Mustang (CZG) Mach 1, enUSA, Edition date: 202110, First-Printing Wheels and Tires

Drivebelt Routing
BRAKE SYSTEM SPECIFICATIONS
Front
Specification
Description
14.96 in (380 mm)
Rotor diameter.
1.34 in (34 mm)
Rotor width.
81.18 in² (523.76 cm²)
Rotor swept area.
1.42 in (36 mm)
Caliper piston diameter.
Rear Specification
Description
12.99 in (330 mm)
Rotor diameter.
0.98 in (25 mm)
Rotor width.
56.04 in² (361.55 cm²)
Rotor swept area.
1.77 in (45 mm)
Caliper piston diameter.
57
2022 Mustang (CZG) Mach 1, enUSA, Edition date: 202110, First-Printing Capacities and SpecificationsE198573

This means you do not have to remember
to change the oil on a mileage-based
schedule. Your vehicle lets you know when
an oil change is due by displaying a
message in the information display.
The following table provides examples of
vehicle use and its impact on oil change
intervals. It is a guideline only. Actual oil
change intervals depend on several factors
and generally decrease with severity of
use.When to expect the message prompting you to change your oil
Vehicle Use and Example
Interval
Normal
7,000– 10,000 mi
(11,000– 16,000 km) Normal commuting with highway driving.
No, or moderate, load or towing.
Flat to moderately hilly roads.
No extended idling.
Severe
5,000– 7,500 mi
(8,000– 12,000 km) Moderate to heavy load or towing.
Mountainous or off-road conditions.
Extended idling.
Extended hot or cold operation.
High engine speeds and loads, engine braking and hard
cornering.
Extreme
3,000–5,000 mi
(4,800–8,000 km) Maximum load or towing.
Extreme hot or cold operation.
Normal Maintenance Intervals At every oil change interval as indicated by the information display
1
Change the engine oil and filter. 2
Rotate tires, inspect tire wear and measure the tread depth.
Perform a multi-point inspection, recommended.
Inspect the automatic transmission fluid level if your vehicle has a dipstick. Consult your
dealer for requirements.
Inspect the brake pads, rotors, hoses and the parking brake.
Inspect the engine cooling system strength and hoses.
71
2022 Mustang (CZG) Mach 1, enUSA, Edition date: 202110, First-Printing Scheduled Maintenance