2022 CITROEN C1 lock

43
C1_en_Chap02_ouvertures_ed01-2016
Opening
F Briefly  press   the   control   in   the   opening  d
irection   to   open   the   the   roof   in   stages.
or
F
 
P
ress   and   hold   the   control   in   the   opening  
d

irection,   until   the   manoeuvre   is   complete,  
t

o   open   the   roof   completely.
 P

ressing   again   stops   the   movement   of  
the
  roof.
Closing
F Briefly   press   the   control   in   the   closing  d
irection   to   open   the   the   roof   in   stages.
or
F
 
P
ress   and   hold   the   control   in   the   closing  
d

irection,   until   the   manoeuvre   is   complete,  
t

o close the roof to position 1 .
 P

ressing   again   stops   the   movement   of  
t

he roof.
F
 
T
o   close   the   roof   completely,   press   and  
h

old   the   control   (between   positions   1
and
  0)
  until   the   roof   locks   closed.
The
  closing   manoeuvre   of   the   roof  
c

ould   cause   serious   injuries:   take  
p

articular   care   with   children.
If
  the   roof   does   not   close   correctly:
-
 
c
heck   that   nothing   is   blocking   the   roof  
(

ignition
 o
ff),
-
 
r
epeat   the   closing   command   (with   the  
e

ngine
 r
unning).
If
  the   problem   persists,   contact   a   CITROËN  
d

ealer   or   a   qualified   workshop.
Operating fault
In the event of an electrical fault,
contact  a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Protection of the electric motors
used for opening and closing the
roof
Following repeated opening and closing of the roof,   the   electric   motors   may   become   too   warm  
a

nd   no   longer   allow   the   roof   to   be   opened   or  
c

losed.   Allow   the   motors   to   cool   down   with   no  
o

peration   of   the   roof   for   10   minutes.
2
Access

47
C1_en_Chap03_ergonomie-confort_ed01-2016
Ensure that no person or object prevents   the   seat   slide   from   returning   to  
it

s
 in
itial
 p
osition.
Check
  that   the   seat   belt   has   reeled   in  
c

orrectly   so   as   to   not   impede   access   for  
p

assengers   to   the   rear   seats.
Heated seat control Access to the rear seats
(3-door)
F Pull  this   control   toward   you   to   fold   the   seat  b
ack   and   move   the   seat   for ward.
When
  returning   the   seat   to   its   initial   position,  
g

uide   it   back   until   the   seat   and   backrest   lock  
i

nto   place.
With
 
the
 
engine
 
running,
 
the
 
front
 
seats
 
can
 
be
 h
eated s
eparately.
F
 
P

ress
 
the
 
control
 
switch.
 T

he
 
indicator
 
lamp
 
comes
 
on.
F
 
P

ressing
 
the
 
switch
 
again
 
stops
 
the
 
hea

ting.
The
 
temperature
 
is
 
controlled
 
automatically.
The
 
seat
 
heating
 
function
 
is
 
deactivated
 
about
 
t

wo
 
minutes
 
after
 
switching
 
off
 
the
 
ignition.
 
To
 
r

eactivate
 
it,
 
switch
 
the
 
ignition
 
on
 
and
 
press
 
t

he
 
control
 
switch
 
again. Switch
 
the
 
seat
 
heating
 
off
 
as
 
soon
 
a

s
 
it
 
is
 
no
 
longer
 
needed,
 
as
 
reducing
 
t

he
 
vehicle's
 
electrical
 
current
 
demand
 
r

educes
 
fuel
 
consumption.
3
Ease of use and comfort

48
C1_en_Chap03_ergonomie-confort_ed01-2016
Your vehicle is fitted with a fixed one-piece cushion bench rear seat, and depending on version:
-  a   folding   split   (50/50)   backrest,
-
 
a
  folding   one-piece   backrest.
When
  not   in   use,   or   before   folding   the   seat  
b

ackrest(s),   stow   the   rear   seat   belts   by  
i

nserting
 t
heir
 t
ongues
 i
n
 t
he
 d
edicated
 h
olders,
 l

ocated   on   the   side   pillars. The
  seat   backrest   is   folded   from   the   rear   of   the  
v

ehicle,   with   the   boot   open.
F
 
P
lace   the   head   restraints   in   the   low  
p

osition.
 R

efer   to   the   "rear   head   restraints"   section.
F
 
P
ull   the   strap(s)   A,
  located   behind   the   seat  
b

ackrest(s)   to   release   them,   and   lay   them  
o

n   the   seat   cushion.
Rear seats
Stowing the seat belts Folding the seat backrest
F Unfold  the   backrest   to   the   rear   and   engage  i
t   on   the   anchorage   B.
F
 
E
nsure   that   the   seat   back   has   locked   in  
p

lace   correctly.
Returning the backrest of the
bench seat to its initial position
3-door 5-door
Ease of use and comfort

51
C1_en_Chap03_ergonomie-confort_ed01-2016
Steering wheel adjustment
(with   power   steering)
F When stationary ,   hold   the   steering   wheel   then   lower t
he   lever   to   release   the   adjustment   mechanism.
F Adjust  the   steering   wheel   to   the   desired   height
and   then   raise   the   lever   to   lock   the   adjustment m

echanism.
For safety reasons, these operations
must   not   be   carried   out   while   driving.
Once
  these   adjustments   have   been   made,
 e

nsure   that   you   can   see   the   instrument
 p

anel   clearly   from   your   driving   position.
Manual rear view mirror
The rear view mirror has two positions:
-  d ay   (normal),
-
 
n
ight   (anti-dazzle).
To
  change   from   one   to   the   other,   push   or   pull  
t

he   lever   on   the   lower   edge   of   the   mirror.
Correct driving position
Before taking to the road and to make the most of  t he  e rgonomics  o f  y our  d riving  p osition,  c arry  
o

ut   these   adjustments   in   the   following   order:
-
 
b
ackrest   angle,
-
 
c
ushion   height,
-
 
l
ongitudinal   position   of   the   seat,
-
 
h
eight   of   the   steering   wheel,
-
 
t
he   interior   and   door   mirrors.
3
Ease of use and comfort

53
C1_en_Chap03_ergonomie-confort_ed01-2016
Recommendations for use
If the interior temperature remains very high after a prolonged period parked in the sun, first ventilate   the   passenger   compartment   for   a   few   minutes.
For
  an   even   air   distribution,   make   sure   that   you   do   not   block   the   outside   air   inlet   grille,   the  
v

ents,   the   air   passages   and   the   air   outlets   to   the   footwells.
Ensure
  that   the   passenger   compartment   filter,   located   behind   the   glove   box   in   the   heater  
u

nit,   is   in   good   condition.   Have   the   filter   elements   replaced   regularly.   If   you   drive   in   dusty  
c

onditions,   change   them   twice   as   often.
Operate
  the   air   conditioning   system   for   5   to   10   minutes,   once   or   twice   a   month,   to   keep   it   in  
p

er fect   working   order.
In
  order   to   ensure   that   your   air   conditioning   system   continues   to   operate   correctly,   you   are  
a

dvised   to   have   it   checked   regularly.
If
  the   system   does   not   produce   cold   air,   do   not   use   it   and   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
The
  air   conditioning   system   does   not   contain   chlorine   and   does   not   present   any   danger   to  
t

he   ozone   layer.
The
  condensation   created   by   the   air   conditioning   results   in   a   flow   of   water   under   the   vehicle  
w

hen   stationary   which   is   per fectly   normal.
3
Ease of use and comfort

71
C1_en_Chap04_conduite_ed01-2016
Starting - switching off the engine with the key
1. "LOCK "   position.  T
he   steering   column   is   unlocked.
2.
" AC

C"
  position.
 T

he   ancillaries   (audio   system,  
1

2V socket...)   can   be   used.
3.


"ON " position
 I

gnition   on.
4.
" S

TA R T"
  position.
 E

ngine
 s
tarting.
Ignition switch
For vehicle fitted with a manual gearbox:
F I nsert   the   key   in   the   ignition   switch.
F
 
T
urn   the   key   to   position   2.
F
 
U
nlock   the   steering   column,   by   turning   the  
w

heel   slightly.
F
 
F
ully   depress   the   clutch   pedal.
F
 
P
ut   the   gear   lever   into   neutral.
F
 
O
perate   the   starter   by   turning   the   key   to  
p

osition 4 (S TA R T ) .
F
 
O
nce   the   engine   is   running,   release  
t

he key.
 T

he   key   returns   automatically   to   position   3
(ON) .
Starting using the key
For vehicles fitted with an ETG gearbox:
F
 I nsert   the   key   in   the   ignition   switch.
F
 
T
urn   the   key   to   position   2.
F
 
U
nlock   the   steering   column,   by   turning   the  
w

heel   slightly.
F

P
ress and hold the brake pedal .
F
 
P
ut   the   gear   selector   into   position   N.
F
 
O
perate   the   starter   by   turning   the   key   to  
p

osition 4 (S TA R T ) .
F
 
O
nce   the   engine   is   running,   release  
t

he key.
 T

he   key   returns   automatically   to   position   3
(ON) .
If
 
you
 
use
 
the
 
ancillaries
 
for
 
a
 
prolonged
 
p

eriod
 
(key
 
in
 
position
 
2 or 3 ),
 
you
 
risk
 
d

ischarging
 
the
 
battery.
 
Starting
 
your
 
v

ehicle
 
will
 
then
 
no
 
longer
 
be
 
possible.
 
B

e aware.
Never
 
leave
 
the
 
engine
 
running
 
in
 
a

n
 
enclosed
 
area
 
without
 
adequate
 
v

entilation:
 in

ternal
 c

ombustion
 e

ngines
 
emit
 
toxic
 
exhaust
 
gases,
 
s

uch
 
as
 
carbon
 
monoxide.
 
Danger
 
of
 
i

ntoxication
 
and
 
death.
 
In
 
very
 
severe
 
w

inter
 
conditions
 
(temperatures
 
b

elow -23°C),
 
it
 
is
 
necessary
 
to
 
allow
 
t

he
 
engine
 
to
 
run
 
for
 
4
 
minutes
 
before
 
s

etting
 
off,
 
in
 
order
 
to
 
ensure
 
the
 
c

orrect
 
operation
 
and
 
durability
 
of
 
t

he
 
mechanical
 
components
 
of
 
your
 
v

ehicle,
 
the
 
engine
 
and
 
gearbox.
4
Driving

72
C1_en_Chap04_conduite_ed01-2016
If you use the ancillaries for a prolonged period,   the   vehicle   will   automatically  
s

witch to " OFF"
  mode   after   about  
20
 m

inutes.
Be aware
 

in   order   to   avoid   discharging  
t

he   battery.
Starting - switching off the engine 
w ith   the   Keyless   Entry   and   Starting  
system
Changing the mode of the
vehicle
With the electronic key inside the v
ehicle;   each   press   on   the   "S TA R T/
STOP " button, with no action on the
pedals,
  changes   the   vehicle's   mode:
F
 
F

irst
 
press   ("ACC "
  mode).
 T

he
 
ancillaries   (radio,   12V   socket...)   can   be  
u

sed.
F
 
S

econd   press   ("ON "
  mode).
 I

gnition   on.
F
 
T

hird
 
press   ("OFF "
  mode).
Avoid
 
attaching
 
heavy
 
objects
 
to
 
the
 k
ey,
 
which
 
would
 
weigh
 
down
 
on
 
its
 
b

lade
 
in
 
the
 
ignition
 
switch
 
and
 
could
 
c

ause
 
a
 
malfunction.
F
 
I

mmobilise
 
the
 
vehicle.
Switching off
F With
  a   manual   gearbox:   put   the   gear   lever  i
nto   neutral.
F
 
W
ith   an   ETG   gearbox:   place   the   selector   at  
p

osition N .
F
 
T
urn   the   key   towards   you   to   position   2 (ACC).
F

Press in and turn the key to position 1 (LOCK) .F Remove   the   key   from   the   ignition   switch.
F  T urn   the   steering   until   the   steering   column  
l

ocks.
Driving

73
C1_en_Chap04_conduite_ed01-2016
Starting using the
electronic key
With the first press on the "S TA R T/
STOP "
  button,   this   indicator   lamp f

lashes   slowly   in   the   instrument   panel.Depending
  on   the   ambient   temperature,  
e

ach   attempt   at   starting   can   take   up   to  
a

round   30   seconds.   During   this   period,  
d

o   not   press   the   "START/STOP " button
again,
  or   release   the   clutch   pedal   or  
b

rake   pedal   (depending   on   the   type   of  
g

earbox).
After
  this   period,   if   the   engine   has   not  
s

tarted,   press   the   "START/STOP "
button
  again   for   another   attempt   at  
s

tarting. If
  one   of   the   starting   conditions   is  
n

ot   met,   the   "Keyless   Entry   and  
S

tarting"   system   indicator   lamp   flashes  
i

n   the   instrument   panel.   In   some  
c

ircumstances,   it   is   necessary   to  
t

urn   the   steering   wheel   slightly   while  
p

ressing   the   "
START/STOP " button to
assist   unlocking   of   the   steering.
For vehicles fitted with a manual gearbox:
F
 
W

ith
 
the   electronic   key   inside   the   vehicle,  
p

ut
 
the   gear   lever   into   neutral   and   fully  
d

epress   the   clutch   pedal. The
  presence   of   the   electronic   key   in  t
he   vehicle   is   essential   for   switching  
o

n   the   ignition   and   starting   only.   Once  
t

he   engine   has   started,   make   sure   that  
t

he   electronic   key   remains   with   the  
v

ehicle   until   the   end   of   the   journey:  
o

ther wise   you   would   not   be   able   to   lock  
t

he vehicle.
F
 
P
ress   and   release   the   "S TA R T/
STOP "
  button.
This
  indicator   lamp   comes   on   in   the  
in

strument
 pan
el. For vehicles fitted with an ETG gearbox:
F
 
W
ith   the   electronic   key   inside   the   vehicle,  
p

ut   the   gear   selector   at   N   and   press   the  
b

rake
 ped
al.
This   indicator   lamp   comes   on   in   the  
in

strument
 pan
el.
F  
P
ress   and   release   the   "
S TA R T/
STOP "   button.
4
Driving