
212SERVICING AND MAINTENANCE  
Mileage or time passed (whichever comes first)
20,000
30,000
40,000
50,000
60,000
70,000
80,000
90,000
100,000
110,000
120,000
130,000
140,000
150,000
Or Years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Or Kilometers:
32,000
48,000
64,000
80,000
96,000
112,000
128,000
144,000
160,000
176,000
192,000
208,000
224,000
240,000
Additional Inspections
Inspect the CV/Universal joints. X X X X X X X X X X X X X X
Inspect front suspension, tie rod ends, boot seals, and replace if 
necessary. X X X
XX X X
Inspect the rear axle fluid. Inspect the front axle fluid (All Wheel 
Drive Only). X X X
XX X X
Inspect the brake linings, replace as necessary. X X XXX X X
Adjust parking brake on vehicles equipped with four wheel disc 
brakes. X X X
XX X X
Inspect transfer case fluid (All Wheel Drive Only). XX XXX
Additional Maintenance
Replace engine air cleaner filter. XX XXX
Replace cabin air filter. To be replaced every 12,000 mi (19,000 km).
Replace spark plugs. 
1X
Flush and replace the engine coolant at 10 years or 
150,000 miles (240,000 km) whichever comes first. X
X
22_LX_OM_EN_USC_t.book  Page 212   

SERVICING AND MAINTENANCE213
Change the transfer case fluid; if using your vehicle for any of the 
following: police, taxi, fleet, off-road, or frequent trailer towing. (All 
Wheel Drive Only). X
X
Change the rear axle fluid and on models equipped with All Wheel 
Drive (AWD) change the front axle fluid if using your vehicle for any of 
the following: police, taxi, fleet, off-road, or frequent trailer towing.
 X
XX
Inspect and replace PCV valve if necessary. X
1. The spark plug change interval is mileage based only, yearly intervals do not apply.
Mileage or time passed (whichever comes first)
20,000
30,000
40,000
50,000
60,000
70,000
80,000
90,000
100,000
110,000
120,000
130,000
140,000
150,000
Or Years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Or Kilometers:
32,000
48,000
64,000
80,000
96,000
112,000
128,000
144,000
160,000
176,000
192,000
208,000
224,000
240,000
WARNING!
You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have 
any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
Failure to properly inspect and maintain your vehicle could result in a component malfunction and affect vehicle handling and performance. This could 
cause an accident.
8
22_LX_OM_EN_USC_t.book  Page 213   

226SERVICING AND MAINTENANCE  
Coolant Level
The coolant bottle provides a quick visual method 
for determining that the coolant level is adequate. 
With the engine off and cold, the level of the engine 
coolant (antifreeze) in the bottle should be 
between the ranges indicated on the bottle.
The radiator normally remains completely full, so 
there is no need to remove the radiator/coolant 
pressure cap unless checking for engine coolant 
freeze point or replacing coolant. Advise your 
service attendant of this. As long as the engine 
operating temperature is satisfactory, the coolant 
bottle need only be checked once a month.
When additional engine coolant is needed to 
maintain the proper level, only OAT coolant that 
meets the requirements of FCA Material Standard 
MS.90032 should be added to the coolant bottle. 
Do not overfill.
Cooling System Notes
NOTE:When the vehicle is stopped after a few miles/kilo -
meters of operation, you may observe vapor 
coming from the front of the engine compartment. 
This is normally a result of moisture from rain, 
snow, or high humidity accumulating on the 
radiator and being vaporized when the thermostat 
opens, allowing hot engine coolant (antifreeze) to 
enter the radiator. If an examination of your engine compartment 
shows no evidence of radiator or hose leaks, the 
vehicle may be safely driven. The vapor will soon 
dissipate.
Do not overfill the coolant expansion bottle.
Check the coolant freeze point in the radiator 
and in the coolant expansion bottle. If engine 
coolant needs to be added, the contents of the 
coolant expansion bottle must also be protected 
against freezing.
If frequent engine coolant additions are 
required, the cooling system should be pressure 
tested for leaks.
Maintain engine coolant concentration at a 
minimum of 50% OAT coolant (conforming to 
MS.90032) and distilled water for proper corro
-
sion protection of your engine which contains 
aluminum components.
Make sure that the coolant expansion bottle 
overflow hoses are not kinked or obstructed.
Keep the front of the radiator clean. If your 
vehicle is equipped with air conditioning, keep 
the front of the condenser clean.
Do not change the thermostat for Summer or 
Winter operation. If replacement is ever neces -
sary, install ONLY the correct type thermostat. 
Other designs may result in unsatisfactory 
engine cooling performance, poor gas mileage, 
and increased emissions.
BRAKE SYSTEM 
In order to ensure brake system performance, all 
brake system components should be inspected 
periodically  Ú page 210.
Fluid Level Check — Brake Master Cylinder  
Check the fluid level in the master cylinder 
immediately if the Brake System Warning Light 
indicates system failure.
Check the fluid level in the master cylinder when 
performing underhood services.
Clean the top of the master cylinder area before 
removing the cap. Add fluid to bring the level up to 
the top of the “FULL” mark on the side of the 
master cylinder reservoir.
Overfilling of fluid is not recommended because it 
may cause leaking in the system.
Add enough fluid to bring the level up to the 
requirements described on the brake fluid 
WARNING!
Riding the brakes can lead to brake failure and 
possibly a collision. Driving with your foot resting 
or riding on the brake pedal can result in 
abnormally high brake temperatures, excessive 
lining wear, and possible brake damage. You 
would not have your full braking capacity in an 
emergency.
22_LX_OM_EN_USC_t.book  Page 226   

270  
CUSTOMER ASSISTANCE
SUGGESTIONS FOR OBTAINING SERVICE 
FOR YOUR VEHICLE 
PREPARE FOR THE APPOINTMENT
All work to be performed may not be covered by the 
warranty. Discuss additional charges with the 
service manager. Keep a maintenance log of your 
vehicle's service history. This can often provide a 
clue to the current problem.
PREPARE A LIST
Make a written list of your vehicle's problems or the 
specific work you want done. If you've had an 
accident or work done that is not on your 
maintenance log, let the service advisor know.
BE REASONABLE WITH REQUESTS
If you list a number of items and you must have 
your vehicle by the end of the day, discuss the 
situation with the service advisor and list the items 
in order of priority. At many authorized dealers, you 
may obtain a rental vehicle (additional charges 
may apply). If you need a rental, it is advisable to 
make these arrangements when you call for an 
appointment.
IF YOU NEED ASSISTANCE   
FCA US LLC and its authorized dealers are vitally 
interested in your satisfaction. We want you to be 
happy with our products and services.
Warranty service must be done by an authorized 
dealer. We strongly recommend that you take the 
vehicle to an authorized dealer. They know your 
vehicle the best, and are most concerned that you 
get prompt and high quality service. FCA US LLC’s 
authorized dealers have the facilities, 
factory-trained technicians, special tools, and the 
latest information to ensure the vehicle is fixed 
correctly and in a timely manner.
This is why you should always talk to an authorized 
dealer’s service manager first. If for some reason 
you are still not satisfied, talk to the general 
manager or owner of the authorized dealer. They 
want to know if you need assistance. If an 
authorized dealer is unable to resolve the concern, 
you may contact FCA US LLC's Customer 
Assistance center.Any communication to FCA US LLC's customer 
center should include the following information:Owner's name and address
Owner's telephone number (home, mobile, and 
office)
Authorized dealer name
Vehicle Identification Number (VIN)
Vehicle delivery date and mileage
FCA U S LLC CUSTOMER CENTER
P.O. Box 21–8004
Auburn Hills, MI 48321–8004
Phone: (800) 247-9753
FCA CANADA INC. CUSTOMER CENTER
P.O. Box 1621
Windsor, Ontario N9A 4H6
Phone: (800) 465-2001 English / (800) 387-9983 
French
22_LX_OM_EN_USC_t.book  Page 270