
4 
GETTING TO KNOW YOUR 
INSTRUMENT PANEL
INSTRUMENT CLUSTER ........................................ 68
Instrument Cluster Descriptions  ....................70
INSTRUMENT CLUSTER DISPLAY ........................ 70
Location And Controls ......................................71
Engine Oil Life Reset  .......................................72
Instrument Cluster Display Selectable Menu 
Items .................................................................73
Battery Saver On/Battery Saver Mode 
Message — Electrical Load Reduction 
Actions —If Equipped .......................................75
Programmable Features ..................................76
WARNING LIGHTS AND MESSAGES ................... 76
Red Warning Lights ..........................................77
Yellow Warning Lights ......................................79
Yellow Indicator Lights .....................................82
Green Indicator Lights......................................82
White Indicator Lights ......................................83
Blue Indicator Lights ........................................83
ONBOARD DIAGNOSTIC SYSTEM — OBD II  ....... 84
Onboard Diagnostic System 
(OBD II) Cybersecurity ......................................84
EMISSIONS INSPECTION AND MAINTENANCE 
PROGRAMS ............................................................ 85
STARTING AND OPERATING
STARTING THE ENGINE  ........................................86
Automatic Transmission  .................................86
Keyless Enter ‘n Go™ — Ignition......................86
Normal Starting  ...............................................86
AutoPark ...........................................................87
Extended Park Starting ....................................88
If Engine Fails To Start .....................................88
Cold Weather Operation
(Below –22°F Or −30°C)  ...............................89
After Starting ....................................................89
ENGINE BLOCK HEATER — IF EQUIPPED  ...........89
ENGINE BREAK-IN RECOMMENDATIONS ...........89
PARKING BRAKE ....................................................90
AUTOMATIC TRANSMISSION ................................91
Ignition Park Interlock ......................................92
Brake Transmission Shift Interlock (BTSI) 
System ..............................................................92
8-Speed Automatic Transmission ...................92
SPORT MODE — IF EQUIPPED ..............................97
FUEL SAVER TECHNOLOGY 5.7L ONLY —
IF EQUIPPED ...........................................................97
POWER STEERING .................................................97
CRUISE CONTROL SYSTEMS — IF EQUIPPED  ....98 Cruise Control  ..................................................98
Adaptive Cruise Control (ACC) ...................... 100 PARKSENSE FRONT AND REAR PARK 
ASSIST — IF EQUIPPED ....................................... 108
ParkSense Sensors ....................................... 109
ParkSense Display ........................................ 109
ParkSense Warning Display ......................... 112
Enabling And Disabling ParkSense.............. 112
Service The ParkSense Park Assist System ...112
Cleaning The ParkSense System ................. 113
ParkSense System Usage Precautions........ 113
LANESENSE — IF EQUIPPED  ............................. 114
LaneSense Operation ................................... 114
Turning LaneSense On Or Off....................... 114
LaneSense Warning Message...................... 115
Changing LaneSense Status ........................ 116
PARKVIEW REAR BACK UP CAMERA ............... 116
REFUELING THE VEHICLE ................................... 118 Emergency Fuel Filler Door Release ............ 118
VEHICLE LOADING  .............................................. 119
Vehicle Certification Label............................ 119
Gross Vehicle Weight Rating (GVWR) .......... 119
Gross Axle Weight Rating (GAWR)  ............... 119
Overloading ................................................... 119
Loading  ......................................................... 120
TRAILER TOWING ................................................ 120
Common Towing Definitions......................... 120
Trailer Hitch Classification............................ 122
Trailer Towing Weights (Maximum Trailer 
Weight Ratings)  ............................................ 122
Trailer And Tongue Weight  .......................... 123
Towing Requirements ................................... 123
Towing Tips  ................................................... 125
22_LX_OM_EN_USC_t.book  Page 4   

5
RECREATIONAL TOWING
(BEHIND MOTORHOME)  ..................................... 126
DRIVING TIPS ....................................................... 126 Driving On Slippery Surfaces ........................ 126
Driving Through Water  ................................. 127
MULTIMEDIA
UCONNECT SYSTEMS  ......................................... 128
CYBERSECURITY  ................................................. 128
UCONNECT SETTINGS  ........................................ 129Customer Programmable Features —
Uconnect 4C/4C NAV Settings  .................... 129
RADIO OPERATION AND MOBILE PHONES...... 144
Regulatory And Safety Information .............. 144
SAFETY
SAFETY FEATURES .............................................. 145 Anti-Lock Brake System (ABS)  ..................... 145
Electronic Brake Control (EBC) System ....... 146
AUXILIARY DRIVING SYSTEMS .......................... 151
Blind Spot Monitoring (BSM) —
If Equipped..................................................... 151
Forward Collision Warning (FCW) With Mitigation 
Operation — 
If Equipped..................................................... 155
Tire Pressure Monitoring System (TPMS) .... 157 OCCUPANT RESTRAINT SYSTEMS  ................... 160
Occupant Restraint Systems Features  ....... 160
Important Safety Precautions ...................... 160Seat Belt Systems  ........................................ 161Supplemental Restraint Systems (SRS) ...... 167Child Restraints ............................................. 176
SAFETY TIPS  ....................................................... 189
Transporting Passengers .............................. 189Transporting Pets  ......................................... 189
Safety Checks You Should Make Inside 
The Vehicle  ................................................... 189
Periodic Safety Checks You Should Make 
Outside The Vehicle ...................................... 191
Exhaust Gas................................................... 191
Carbon Monoxide Warnings ......................... 192IN CASE OF EMERGENCY
HAZARD WARNING FLASHERS ........................ 193
ASSIST AND SOS MIRROR — IF EQUIPPED ..... 193
JACKING AND TIRE CHANGING ......................... 197 Preparations For Jacking  ............................. 197
Jack Location/Spare Tire Stowage .............. 198Jacking And Changing A Tire  ....................... 198
JUMP STARTING  ................................................. 201
Preparations For Jump Start ........................ 201
Jump Starting Procedure .............................. 202 REFUELING IN AN EMERGENCY –
IF EQUIPPED ........................................................ 203
IF YOUR ENGINE OVERHEATS  ........................... 204
MANUAL PARK RELEASE  .................................. 205
FREEING A STUCK VEHICLE ............................... 206
TOWING A DISABLED VEHICLE .......................... 208 All Wheel Drive (AWD) Models...................... 209
Rear Wheel Drive (RWD) Models ................. 209
ENHANCED ACCIDENT RESPONSE SYSTEM 
(EARS)  .................................................................. 209
EVENT DATA RECORDER (EDR) ......................... 209
SERVICING AND MAINTENANCE
SCHEDULED SERVICING  .................................... 210
Maintenance Plan ......................................... 211
ENGINE COMPARTMENT .................................... 214
3.6L Engine  .................................................. 2145.7L Engine ................................................... 215
Checking Oil Level  ........................................ 216
Adding Washer Fluid ..................................... 216Maintenance-Free Battery  ........................... 216
Pressure Washing ......................................... 217
22_LX_OM_EN_USC_t.book  Page 5   

70GETTING TO KNOW YOUR INSTRUMENT PANEL  
INSTRUMENT CLUSTER DESCRIPTIONS 
1. Tachometer
Indicates the engine speed in revolutions 
per minute (RPM x 1000).
2. Instrument Cluster Display
When the appropriate conditions exist, this 
display shows the instrument cluster 
display messages  Ú page 70.
3. Speedometer
Indicates vehicle speed.
4. Temperature Gauge
The temperature gauge shows engine 
coolant temperature. Any reading within the 
normal range indicates that the engine 
cooling system is operating satisfactorily.
The gauge pointer will likely indicate a 
higher temperature when driving in hot 
weather, up mountain grades, or when 
towing a trailer. It should not be allowed to 
exceed the upper limits of the normal oper -
ating range. 5. Fuel Gauge
The pointer shows the level of fuel in the 
fuel tank when the Keyless Push Button 
Ignition is in the ON/RUN position.
 The fuel pump symbol points to 
the side of the vehicle where the 
fuel door is located.
NOTE:The warning / indicator Lights will briefly illuminate 
for a bulb check when the ignition is first cycled.
INSTRUMENT CLUSTER DISPLAY
Your vehicle is equipped with an instrument cluster 
display, which offers useful information to the 
driver. With the ignition in the OFF mode, opening/
closing of a door will activate the display for 
viewing, and display the total miles, or kilometers, 
in the odometer. Your instrument cluster display is 
designed to display important information about 
your vehicle’s systems and features. Using a driver 
interactive display located on the instrument 
panel, your instrument cluster display can show 
you how systems are working and give you 
warnings when they are not. The steering wheel 
mounted controls allow you to scroll through the 
main menus and submenus. You can access the 
specific information you want and make selections 
and adjustments.
WARNING!
A hot engine cooling system is dangerous. You or 
others could be badly burned by steam or boiling 
coolant. It is recommended to call an authorized 
dealer for service if your vehicle overheats  
Ú page 224.
CAUTION!
Driving with a hot engine cooling system could 
damage your vehicle. If the temperature gauge 
reads “H,” pull over and stop the vehicle. Idle the 
vehicle with the air conditioner turned off until 
the pointer drops back into the normal range. If 
the pointer remains on the “H,” turn the engine 
off immediately and call an authorized dealer for 
service.
22_LX_OM_EN_USC_t.book  Page 70   

76GETTING TO KNOW YOUR INSTRUMENT PANEL  
Loss of the battery charge may indicate one or 
more of the following conditions:
The charging system cannot deliver enough 
electrical power to the vehicle system because 
the electrical loads are larger than the capability 
of the charging system. The charging system is 
still functioning properly.
Turning on all possible vehicle electrical loads 
(e.g. HVAC to max settings, exterior and interior 
lights, overloaded power outlets +12 Volts, 115 
Volts AC, USB ports) during certain driving condi -
tions (city driving, towing, frequent stopping).
Installing options like additional lights, upfitter 
electrical accessories, audio systems, alarms 
and similar devices.
Unusual driving cycles (short trips separated by 
long parking periods).
The vehicle was parked for an extended period 
of time (weeks, months).
The battery was recently replaced and was not 
charged completely.
The battery was discharged by an electrical load 
left on when the vehicle was parked.
The battery was used for an extended period 
with the engine not running to supply radio, 
lights, chargers, +12 Volt portable appliances 
like vacuum cleaners, game consoles and 
similar devices. What to do when an electrical load reduction 
action message is present (“Battery Saver On” or 
“Battery Saver Mode”)
During a trip:
Reduce power to unnecessary loads if possible:
Turn off redundant lights (interior or exte
-
rior)
Check what may be plugged in to power 
outlets +12 Volts, 115 Volts AC, USB ports
Check HVAC settings (blower, temperature)
Check the audio settings (volume)
After a trip:
Check if any aftermarket equipment was 
installed (additional lights, upfitter electrical 
accessories, audio systems, alarms) and review 
specifications if any (load and Ignition Off Draw 
currents).
Evaluate the latest driving cycles (distance, 
driving time and parking time).
The vehicle should have service performed if 
the message is still present during consecutive 
trips and the evaluation of the vehicle and 
driving pattern did not help to identify the cause.
PROGRAMMABLE FEATURES
The instrument cluster display can be used to view 
or change the following settings. Push the  up  or 
down   arrow button to scroll through the main 
menus, then push the  right  arrow button to 
scroll through the submenus of each menu item. 
Push the  left  arrow button to scroll back to a 
previous menu or submenu.
WARNING LIGHTS AND MESSAGES
The warning/indicator lights will illuminate in the 
instrument panel together with a dedicated 
message and/or acoustic signal when applicable. 
These indications are indicative and precautionary 
and as such must not be considered as exhaustive 
and/or alternative to the information contained in 
the Owner’s Manual, which you are advised to read 
carefully in all cases. Always refer to the 
information in this chapter in the event of a failure 
indication. All active warning lights will display first 
if applicable. The system check menu may appear 
different based upon equipment options and 
current vehicle status. Some warning lights are 
optional and may not appear.
22_LX_OM_EN_USC_t.book  Page 76   

78GETTING TO KNOW YOUR INSTRUMENT PANEL  
Seat Belt Reminder Warning Light 
This warning light indicates when the 
driver or passenger seat belt is 
unbuckled. When the ignition is first 
placed in the ON/RUN or ACC/ON/RUN 
position and if the driver’s seat belt is unbuckled, 
a chime will sound and the light will turn on. When 
driving, if the driver or front passenger seat belt 
remains unbuckled, the Seat Belt Reminder Light 
will flash or remain on continuously and a chime 
will sound  Ú page 160.
Battery Charge Warning Light 
This warning light will illuminate when 
the battery is not charging properly. If it 
stays on while the engine is running, 
there may be a malfunction with the 
charging system. Contact an authorized dealer as 
soon as possible.
This indicates a possible problem with the 
electrical system or a related component.
Door Open Warning Light  
This indicator will illuminate when a 
door is ajar/open and not fully closed.
NOTE:If the vehicle is moving, there will also be a single 
chime.
Electric Power Steering Fault Warning 
Light
This warning light will turn on when 
there's a fault with the Electric Power 
Steering (EPS) system  Ú page 97.
Electronic Throttle Control (ETC) Warning 
Light 
This warning light will illuminate to 
indicate a problem with the ETC system. 
If a problem is detected while the 
vehicle is running, the light will either 
stay on or flash depending on the nature of the 
problem. Cycle the ignition when the vehicle is 
safely and completely stopped and the 
transmission is placed in the PARK position. The 
light should turn off. If the light remains on with the 
vehicle running, your vehicle will usually be 
drivable; however, see an authorized dealer for 
service as soon as possible.
NOTE:This light may turn on if the accelerator and brake 
pedals are pressed at the same time.
If the light continues to flash when the vehicle is 
running, immediate service is required and you 
may experience reduced performance, an 
elevated/rough idle, or engine stall and your 
vehicle may require towing. The light will come on 
when the ignition is placed in the ON/RUN or ACC/
ON/RUN position and remain on briefly as a bulb 
check. If the light does not come on during starting, 
have the system checked by an authorized dealer.
Engine Coolant Temperature Warning 
Light 
This warning light warns of an 
overheated engine condition. If the 
engine coolant temperature is too high, 
this indicator will illuminate and a single 
chime will sound. If the temperature reaches the 
upper limit, a continuous chime will sound for four 
minutes or until the engine is able to cool, 
whichever comes first.
If the light turns on while driving, safely pull over 
and stop the vehicle. If the Air Conditioning (A/C) 
system is on, turn it off. Also, shift the transmission 
into NEUTRAL and idle the vehicle. If the 
temperature reading does not return to normal, 
turn the engine off immediately and call for service  
Ú page 204.
WARNING!
Continued operation with reduced assist could 
pose a safety risk to yourself and others. Service 
should be obtained as soon as possible.
22_LX_OM_EN_USC_t.book  Page 78   

GETTING TO KNOW YOUR INSTRUMENT PANEL79
Trunk Open Warning Light
This indicator will illuminate when the 
trunk is open and not fully closed.
NOTE:If the vehicle is moving, there will also be a single 
chime.
Oil Pressure Warning Light  
This warning light will illuminate to 
indicate low engine oil pressure. If the 
light turns on while driving, stop the 
vehicle, shut off the engine as soon as 
possible, and contact an authorized dealer. A 
chime will sound when this light turns on.
Do not operate the vehicle until the cause is 
corrected. This light does not indicate how much oil 
is in the engine. The engine oil level must be 
checked under the hood.
Oil Temperature Warning Light
This warning light will illuminate to 
indicate the engine oil temperature is 
high. If the light turns on while driving, 
stop the vehicle and shut off the engine 
as soon as possible. Wait for oil temperature to 
return to normal levels.
Transmission Temperature Warning Light — 
If Equipped
This warning light will illuminate to warn 
of a high transmission fluid 
temperature. This may occur with 
strenuous usage such as trailer towing. 
If this light turns on, stop the vehicle and run the 
engine at idle or slightly faster, with the 
transmission in PARK or NEUTRAL, until the light 
turns off. Once the light turns off, you may continue 
to drive normally.
Vehicle Security Warning Light — 
If Equipped  
This light will flash at a fast rate for 
approximately 15 seconds when the 
Vehicle Security system is arming, and 
then will flash slowly until the vehicle is 
disarmed.
YELLOW WARNING LIGHTS
Service Adaptive Cruise Control Warning 
Light — If Equipped
This light will turn on when a ACC is not 
operating and needs service  
Ú page 100.
Anti-Lock Brake System (ABS) Warning 
Light 
This warning light monitors the ABS. The 
light will turn on when the ignition is 
placed in the ON/RUN or ACC/ON/RUN 
position and may stay on for as long as 
four seconds.
If the ABS light remains on or turns on while 
driving, then the Anti-Lock portion of the brake 
system is not functioning and service is required as 
soon as possible. However, the conventional brake 
system will continue to operate normally, 
assuming the Brake Warning Light is not also on.
WARNING!
If you continue operating the vehicle when the 
Transmission Temperature Warning Light is 
illuminated you could cause the fluid to boil over, 
come in contact with hot engine or exhaust 
components and cause a fire.
CAUTION!
Continuous driving with the Transmission 
Temperature Warning Light illuminated will 
eventually cause severe transmission damage 
or transmission failure.
3
22_LX_OM_EN_USC_t.book  Page 79   

GETTING TO KNOW YOUR INSTRUMENT PANEL81
Certain conditions, such as a loose or missing gas 
cap, poor quality fuel, etc., may illuminate the light 
after engine start. The vehicle should be serviced if 
the light stays on through several typical driving 
styles. In most situations, the vehicle will drive 
normally and will not require towing.
When the engine is running, the MIL may flash to 
alert serious conditions that could lead to immediate 
loss of power or severe catalytic converter damage. 
The vehicle should be serviced by an authorized 
dealer as soon as possible if this occurs.
Service AWD Warning Light — If Equipped
This warning light will turn on to indicate 
the All Wheel Drive (AWD) system is not 
functioning properly and that service is 
required. Contact an authorized dealer.
Service Forward Collision Warning (FCW) 
Light — If Equipped
This warning light will illuminate to 
indicate a fault in the Forward Collision 
Warning System. Contact an authorized 
dealer for service Ú page 155.
Tire Pressure Monitoring System (TPMS) 
Warning Light 
The warning light switches on and a 
message is displayed to indicate that 
the tire pressure is lower than the 
recommended value and/or that slow 
pressure loss is occurring. In these cases, optimal 
tire duration and fuel consumption may not be 
guaranteed.
Should one or more tires be in the condition 
mentioned above, the display will show the 
indications corresponding to each tire. Each tire, including the spare (if provided), should 
be checked monthly when cold and inflated to the 
inflation pressure recommended by the vehicle 
manufacturer on the vehicle placard or tire 
inflation pressure label. If your vehicle has tires of 
a different size than the size indicated on the 
vehicle placard or tire inflation pressure label, you 
should determine the proper tire inflation pressure 
for those tires.
As an added safety feature, your vehicle has been 
equipped with a TPMS that illuminates a low tire 
pressure warning light when one or more of your 
tires is significantly underinflated. Accordingly, 
when the low tire pressure warning light 
illuminates, you should stop and check your tires 
as soon as possible, and inflate them to the proper 
pressure. Driving on a significantly underinflated 
tire causes the tire to overheat and can lead to tire 
failure. Underinflation also reduces fuel efficiency 
and tire tread life, and may affect the vehicle’s 
handling and stopping ability.
WARNING!
A malfunctioning catalytic converter, as referenced 
above, can reach higher temperatures than in 
normal operating conditions. This can cause a fire 
if you drive slowly or park over flammable 
substances such as dry plants, wood, cardboard, 
etc. This could result in death or serious injury to 
the driver, occupants or others.
CAUTION!
Prolonged driving with the Malfunction Indicator 
Light (MIL) on could cause damage to the 
vehicle control system. It also could affect fuel 
economy and driveability. If the MIL is flashing, 
severe catalytic converter damage and power 
loss will soon occur. Immediate service is 
required.
CAUTION!
Do not continue driving with one or more flat 
tires as handling may be compromised. Stop the 
vehicle, avoiding sharp braking and steering. If a 
tire puncture occurs, repair immediately using 
the dedicated tire repair kit and contact an 
authorized dealer as soon as possible.
3
22_LX_OM_EN_USC_t.book  Page 81   

84GETTING TO KNOW YOUR INSTRUMENT PANEL  
ONBOARD DIAGNOSTIC SYSTEM — OBD II   
Your vehicle is equipped with a sophisticated 
Onboard Diagnostic system called OBD II. This 
system monitors the performance of the 
emissions, engine, and transmission control 
systems. When these systems are operating 
properly, your vehicle will provide excellent 
performance and fuel economy, as well as engine 
emissions well within current government 
regulations.
If any of these systems require service, the OBD II 
system will turn on the Malfunction Indicator Light 
(MIL). It will also store diagnostic codes and other 
information to assist your service technician in 
making repairs. Although your vehicle will usually 
be drivable and not need towing, see an authorized 
dealer for service as soon as possible.
ONBOARD DIAGNOSTIC SYSTEM 
(OBD II) C
YBERSECURITY
Your vehicle is required to have an OBD II and a 
connection port to allow access to information 
related to the performance of your emissions 
controls. Authorized service technicians may need 
to access this information to assist with the 
diagnosis and service of your vehicle and 
emissions system  Ú page 128.
CAUTION!
Prolonged driving with the MIL on could cause 
further damage to the emission control 
system. It could also affect fuel economy and 
driveability. The vehicle must be serviced 
before any emissions tests can be performed.
If the MIL is flashing while the vehicle is 
running, severe catalytic converter damage 
and power loss will soon occur. Immediate 
service is required.
WARNING!
ONLY an authorized service technician should 
connect equipment to the OBD II connection 
port in order to read the VIN, diagnose, or 
service your vehicle.
If unauthorized equipment is connected to the 
OBD II connection port, such as a 
driver-behavior tracking device, it may:
Be possible that vehicle systems, 
including safety related systems, could be 
impaired or a loss of vehicle control could 
occur that may result in an accident 
involving serious injury or death.
Access, or allow others to access, infor -
mation stored in your vehicle systems, 
including personal information.
22_LX_OM_EN_USC_t.book  Page 84