GETTING TO KNOW YOUR INSTRUMENT PANEL
74
GREEN INDICATOR LIGHTS
Automatic High Beam Indicator Light — If 
Equipped
This indicator light will illuminate when 
the automatic high beam headlights are 
activated.
Left Turn Signal Indicator Light 
The instrument cluster directional arrow 
will flash independently for the left turn 
signal as selected, as well as the 
exterior turn signal lamp(s) (front and 
rear) as selected when the multifunction lever is 
moved down (left). This directional arrow will 
flash in conjunction with the right directional 
arrow when the hazard warning light button is 
pushed.
Parking/Headlights On Indicator Light 
This indicator will illuminate when the 
parking lights or headlights are turned 
on.
Right Turn Signal Indicator Light 
The instrument cluster directional arrow 
will flash independently for the right 
turn signal as selected, as well as the 
exterior turn signal lamp(s) (front and 
rear) as selected when the multifunction lever is 
moved up (right). This directional arrow will flash 
in conjunction with the left directional arrow 
when the hazard warning light button is pushed.
BLUE INDICATOR LIGHTS
High Beam Indicator Light — If Equipped
This indicator shows that the high beam 
headlights are on. Push the 
multifunction control lever away from 
you to switch the headlights to high 
beam. Push the lever a second time to switch the 
headlights back to low beam. Pull the lever 
toward you for a temporary high beam on, “flash 
to pass” scenario.
RED SYMBOLS
Alfa Steering Torque (AST) Failure
The switching on of the telltale signals a 
failure in the automatic steering 
correction system.
Contact an authorized dealer to have the system 
checked.
Alternator Failure 
The switching on of the telltale with 
engine on corresponds to an alternator 
failure.
Contact an authorized dealer as soon as 
possible.
Automatic Transmission Failure
The telltale turns on, together with a 
buzzer warning, to indicate that the 
automatic transmission is faulty.
Contact an authorized dealer as soon as 
possible.
Brake Disc Temperature
When the symbol turns on, it indicates 
an excessive temperature of the brake 
discs. Let the breaking system cool 
down by reducing the speed.
Driver Attention Assist (DAA) System 
Activation
The symbol appears, together with a 
message on the display, in case of 
activation of the DAA system.
Stop to pause while driving, pulling the car over in 
safe conditions.
 WARNING!
The TPMS has been optimized for the original 
equipment tires and wheels. TPMS pressures 
and warning have been established for the tire 
size equipped on your vehicle. Undesirable sys -
tem operation or sensor damage may result 
when using replacement equipment that is not 
of the same size, type, and/or style. Aftermarket 
wheels can cause sensor damage. Using after -
market tire sealants may cause the Tire Pres -
sure Monitoring System (TPMS) sensor to 
become inoperable. After using an aftermarket 
tire sealant it is recommended that you take 
your vehicle to an authorized dealership to have 
your sensor function checked.
 CAUTION!
Driving the vehicle with this symbol on may 
severely damage the gearbox, with resulting 
breakage. The oil may also overheat: contact 
with hot engine or with exhaust components 
at high temperature could cause fires.
22_GU_OM_EN_USC_t.book  Page 74