2021 YAMAHA YZF1000 remove seats

INSTRUMENT AND CONTROL FUNCTIONS
3-11
3
EAU01698
Seats Rider seat
To remove the rider seat1. Insert the key into the seat lock,
and then turn it as shown.
2. Pull the rider seat off.To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, and then push the rear
of the seat down to lock it in place.
2. Remove the key.Passenger seat
To remove the passenger seat
1. Remove the rider seat.
2. Pull the passenger seat up.
To install the passenger seat1. Insert the projection on the rear of
the passenger seat and the hooks
on the front of the passenger seat
into the seat holders as shown,
and then push the seat toward the
back.
2. Install the rider seat.
1. Rider seat lock
1. Projection
2. Seat holder
1. Projection
2. Hook (´ 2)
3. Seat holder (´ 3)
E_4sv.book Page 11 Friday, November 10, 2000 3:03 PM

INSTRUMENT AND CONTROL FUNCTIONS
3-12
3
NOTE:_ Make sure that the seats are properly
secured before riding. _
EAU00264
Helmet holder The helmet holder is located under the
rider seat.
To secure a helmet to the helmet
holder
1. Remove the rider seat. (See
page 3-11 for rider seat removal
and installation procedures.)
2. Attach the helmet to the helmet
holder, and then securely install
the seat.
EW000030
WARNING
_ Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an accident. _To release the helmet from the hel-
met holder
Remove the rider seat, remove the hel-
met from the helmet holder, and then
install the seat.
1. Helmet holder
E_4sv.book Page 12 Friday, November 10, 2000 3:03 PM

PERIODIC MAINTENANCE AND MINOR REPAIR
6-5
6
EAU01065
Removing and installing
cowlings The cowlings shown above need to be
removed to perform some of the main-
tenance jobs described in this chapter.
Refer to this section each time a cowl-
ing needs to be removed and installed.
EAU00484
Cowling A
To remove the cowlingRemove the cowling screws, and then
pull the cowling off as shown.
To install the cowlingPlace the cowling in the original posi-
tion, and then install the screws.
EAU03946
Cowling B
To remove the cowling1. Remove the rider and passenger
seats. (See page 3-11 for rider
and passenger seat removal and
installation procedures.)
2. Remove the cowling screws, and
then pull the cowling off as shown.
1. Cowling A
2. Cowling B
3. Cowling C
1. Screw (´ 13)
1. Screw (´ 3)
E_4sv.book Page 5 Friday, November 10, 2000 3:03 PM

PERIODIC MAINTENANCE AND MINOR REPAIR
6-6
6 To install the cowling
1. Place the cowling in the original
position, and then install the
screws.
2. Install the seats.
EAU00483
Cowling C
To remove the cowling1. Remove the cowling bolts.
2. Disconnect the turn signal light
lead connectors, and then take the
cowling off.To install the cowling
1. Connect the turn signal light lead
connectors.
2. Place the cowling in the original
position.
3. Install the cowling bolts.
1. Bolt (´ 14)Left side
Right side
1. Turn signal light lead connector (´ 2)
E_4sv.book Page 6 Friday, November 10, 2000 3:03 PM