9-24
9
8. Wash the sponge material gently but thor-
oughly in solvent. WARNING! Always use
parts cleaning solvent. Never use low-
flash-point solvents or gasoline because
the engine could catch fire or explode.
[EWB01943]
9. Squeeze the excess solvent out of the sponge material and let it dry. NOTICE: Do
not twist the sponge material when
squeezing it.
[ECB00442]
10. Check the sponge material and replace it if damaged.
11. Apply Yamaha foam air filter oil or other qual- ity foam air filter oil to the sponge material.TIPThe sponge material should be wet but not drip-
ping. 12. Pull the sponge material over the air filter ele-ment frame.
13. Apply all-purpose grease to the air filter ele- ment seat.
1. Sponge material
2. Air filter element frame
1
2
UBKD60E0.book Page 24 Wednesday, November 18, 2020 8:39 AM
11-2
11
Starting system:Electric starter
Lubrication system: Dry sumpEngine oil:Recommended brand:
SAE viscosity grades:
5W-30, 10W-30, 10W-40, 15W-40, 20W-40, 20W-50
Recommended engine oil grade: API service SG type or higher, JASO standard MA
Quantity: Oil change:1.40 L (1.48 US qt, 1.23 Imp.qt) With oil filter removal:
1.45 L (1.53 US qt, 1.28 Imp.qt)
Coolant quantity:Radiator (including all routes):
1.25 L (1.32 US qt, 1.10 Imp.qt)
Coolant reservoir (up to the maximum level mark): 0.25 L (0.26 US qt, 0.22 Imp.qt)Air filter:Air filter element:
Wet element
Air filter oil grade: Foam air-filter oilFuel:Recommended fuel:
Premium unleaded gasoline (Gasohol [E10] acceptable)
Minimum research octane: 97
Fuel tank capacity: 10 L (2.6 US gal, 2.2 Imp.gal)
Fuel reserve amount:
3.4 L (0.90 US gal, 0.75 Imp.gal)Throttle body:ID mark:1TD1Spark plug (s):Manufacturer/model:NGK/CR8E
Spark plug gap: 0.7–0.8 mm (0.028–0.031 in)
0 10 30 50 70 90 110 130 F
–20 –10 0 10 20 30 40 50 CSAE 5W-30
SAE 10W-30
SAE 10W-40
SAE 15W-40
SAE 20W-40SAE 20W-50
UBKD60E0.book Page 2 Wednesday, November 18, 2020 8:39 AM
12-1
12
INDEX
AAccessories and loading ................................................ 7-5
Air filter element, cleaning ........................................... 9-22BBattery ......................................................................... 9-43
Brake and clutch levers, checking and lubricating ...... 9-39
Brake fluid, changing ................................................... 9-31
Brake fluid level, checking ........................................... 9-30
Brake lever ..................................................................... 5-5
Brake lever free play, checking the front ..................... 9-32
Brake light switches ..................................................... 9-34
Brake pads, checking the front and rear ..................... 9-29
Brake pedal .................................................................... 5-6
Brake pedal, checking and lubricating ........................ 9-40
Brake pedal height, checking ...................................... 9-32
Brakes .......................................................................... 9-28
Brakes, front and rear .................................................... 6-4
Brake/tail light .............................................................. 9-49CCables, checking and lubricating ................................ 9-38
Chassis fasteners .......................................................... 6-7
Cleaning ....................................................................... 10-1
Clutch lever .................................................................... 5-5
Clutch lever free play, adjusting .................................. 9-35
Coolant .................................................................6-4, 9-20
Coolant, changing ........................................................ 9-22
Coolant temperature warning light ................................ 5-2
Cowling and panels, removing and installing .............. 9-10
DDrive chain ..................................................................... 6-5
Drive chain, lubricating ................................................ 9-38
Drive chain slack .......................................................... 9-36EEngine break-in .............................................................. 7-4
Engine oil ....................................................................... 6-4
Engine oil and oil filter element .................................... 9-14
Engine, start ................................................................... 7-1
Engine stop switch ........................................................ 5-3
Engine trouble warning light .......................................... 5-2FFuel ......................................................................... 5-9, 6-4
Fuel level warning light .................................................. 5-2
Fuel tank cap ................................................................. 5-8
Fuse, replacing ............................................................ 9-46HHandlebar position, adjusting ...................................... 5-23
Handlebar switches ....................................................... 5-3
Headlight beam, adjusting ........................................... 9-49
Headlight bulb, replacing ............................................. 9-46IIdentification numbers ................................................... 1-1
Indicator light and warning lights ................................... 5-1
Instruments, lights and switches ................................... 6-7LLabel locations ............................................................... 2-1
Light switch ................................................................... 5-3
UBKD60E0.book Page 1 Wednesday, November 18, 2020 8:39 AM