2021 VOLKSWAGEN UP! seats

Cleaning and caring for natural leather covers
First read and observe the introductoryinformation and safety warnings⇒
Introduction
Please contact a Volkswagen dealership or other qualified workshop if you have any questions on
cleaning and caring for the leather equipment in your vehicle.
Care and use
Natural leather is sensitive as it does not have a uniform coating of dye.
•Use a leather cream with sunlight protection and impregnation properties on a regular basis and
always after cleaning. The cream nourishes the leather, keeps it breathable and supple and
replaces lost moisture. It also protects the surface.
•Leather should be cleaned every two to three months and fresh stains removed.
•Treat the leather with a special leather care product every six months ⇒.
•Always apply cleaning and care products extremely sparingly and always use a dry cotton or
woollen cloth that is free from fluff. Do not apply cleaning and care products directly to the
leather.
•Remove fresh stains such as ink, ball-point pen ink, lipstick, shoe cream etc. as quickly as
possible.
•Look after the pigment. Use a special coloured leather cream to refresh the colour where
necessary.
•Wipe it off with a soft cloth.
Cleaning
Volkswagen recommends that you use a damp cotton or wool cloth for general cleaning purposes.
Do not let the water soak through the leather or soak into the seams.
Please observe the following notes prior to cleaning the leather upholstery ⇒ Cleaning upholstery
on seat cushions with seat heating, electrically adjustable seats, or seats containing airbag
components.
Type of stainCleaning
Stubborn stains– Use a wrung-out cloth to apply a mild soap solution.
– Dry with an absorbent, dry cloth.
Water-based stains, e.g.
coffee, tea, juice, blood
etc.
– Remove fresh stains with an absorbent cloth,
– If the stain has already dried, use a suitable cleaning agent ⇒.
Oily stains, e.g. oil, lipstick
etc.
– Remove fresh stains with an absorbent cloth.
– If the stain has not yet penetrated the surface, use a suitable
cleaning agent ⇒.
Difficult stains, e.g. biro,
felt tip pen, nail varnish,
emulsion paint, shoe
polish etc.
– Dry with an absorbent, dry cloth.
– Clean with a suitable leather stain remover.
•Brushes should be used on carpets and mats only. Other surfaces could be damaged by
brushes.
•When washing paste or fine detergent solutions are applied with a damp cloth or sponge,
visible edges may appear on the upholstery once it has dried. This can be due to
substances such as surfactants. These edges are usually difficult or even impossible to
remove.
NOTICE
•Do not soak Alcantara under any circumstances.
•Do not use leather care products, solvents, wax polish, shoe cream, stain removers or
similar products on Alcantara.
•Do not use brushes if cleaning with liquids. This could damage the surface of the material.
NOTICE
®
®
a)

However, slight colour variations will arise in normal use.
Mild soap solution: two tablespoons neutral soap diluted in one litre of water.
Cleaning leatherette upholstery
First read and observe the introductoryinformation and safety warnings⇒
Introduction
Please observe the following notes prior to cleaning the leatherette upholstery ⇒ Cleaning
upholstery on seat cushions with seat heating, electrically adjustable seats, or seats containing
airbag components.
Only use water and neutral detergents to clean the leatherette upholstery.
Cleaning stowage compartments, drink holders and ash trays
Fig. 128 In the centre console: stowage compartment with drink holder
Fig. 129 Ashtray with snuffer, removed and opened
First read and observe the introductoryinformation and safety warnings⇒
Introduction
Cleaning stowage compartments and drink holders
•Moisten a clean, lint-free cloth with water and clean the parts.
•If this does not provide satisfactory results, use a special solvent-free plastic cleaning product.
Cleaning the ashtray
•Remove and empty the ashtray.
•Wipe the ashtray with a cloth to clean it.
To clean the snuffer ⇒ Fig. 129, use a toothpick or similar object to pick out the ashes.
•Do not use solvents, wax polish, shoe cream, spot removers or similar products on leather.
•Stains cannot be removed if they has been left on the leather for a long time and have
penetrated the surface.
•Spilt liquids should be cleaned immediately using an absorbent cloth as the leather surface
and the stitching absorb liquids quickly.
•If the car is left standing outdoors for long periods, the leather should be protected against
direct sunlight to prevent it from fading.
NOTICE
a)
Do not use solvents, wax polish, shoe cream, spot removers or similar products on the
leatherette upholstery. These may cause the material to become hard and brittle prematurely.
NOTICE

The vehicle owner should keep all assembly documentation for these auxiliary fittings, and pass it
on to any scrapping company later engaged. In this way, environmentally compatible disposal
should be guaranteed for all vehicles, including refitted vehicles.
Windscreen repairs
To function properly, some items of equipment require a camera or sensor, which is located on the
inside of the windscreen near the interior mirror. If the windscreen in the viewing field of the camera
or sensors has been damaged, e.g. by stone impact, the windscreen must be replaced. Repairing
the crack can lead to malfunction or functional faults in the equipment.
After changing the windscreen, the camera and sensors must be set up and calibrated by a
qualified workshop.
Repairs and faults in the airbag system
First read and observe the introductoryinformation and safety warnings⇒
Introduction
Repairs and modifications must always be carried out according to Volkswagen specifications⇒
.
Modifications and repairs to the front bumper, the doors, the front seats, the roof, or the bodywork
should be carried out by a qualified workshop. System components and airbag system sensors can
be located on these vehicle components.
If you work on the airbag system or remove and install parts of the system when performing other
repair work, parts of the airbag system may be damaged. The consequence may be that, in the
event of an accident, the airbag inflates incorrectly or does not inflate at all.
Regulations must be observed to ensure that the effectiveness of the airbags is not reduced and
that removed parts do not cause any injuries or environmental pollution. Qualified workshops are
familiar with these requirements.
Any modifications to the vehicle's suspension could prevent the airbag system from working
properly during a collision. For example, using tyre/rim combinations that have not been approved
by Volkswagen, lowering the vehicle, making modifications to the suspension rate including work on
the springs, struts and shock absorbers could change the forces that are measured by the airbag
sensors and sent to the electronic control unit. Some changes to the suspension could cause the
forces measured by the sensors to increase. This can lead to the airbag system being triggered in
collision scenarios where it normally would not be triggered if modifications to the suspension had
not been made. Other modifications can cause the forces measured by the sensors to decrease,
therefore preventing the airbag system from being triggered when it should have been.
Retrofitting two-way radios
First read and observe the introductoryinformation and safety warnings⇒
Introduction
Incorrect repairs and modifications can cause functional problems and damage to the vehicle
and impair the effectiveness of the driver assist systems. This can result in accidents and
severe injuries.
•Repairs and modifications to your vehicle should only be carried out by a qualified
workshop.
WARNING
Incorrect repairs and modifications can cause function problems and damage to the vehicle
and impair the effectiveness of the airbag system. This can result in accidents and serious or
even fatal injuries.
•Repairs and modifications to your vehicle should only be carried out by a qualified
workshop.
•Airbag modules cannot be repaired. They must be replaced.
•Never use recycled airbag components or components that have been taken from end-of-
life vehicles in your vehicle.
WARNING
Modifications to the vehicle's suspension, including the use of unsuitable tyre/rim
combinations, can cause the airbag system to work differently and increase the risk of serious
or fatal injuries in the event of an accident.
•Never install any components in the suspension system that do not have the same
characteristics as the original factory-fitted components.
•Never use tyre/rim combinations that have not been approved by Volkswagen.
WARNING