2021 VOLKSWAGEN ATLAS CROSS SPORT change time

Activate Cruise Control
Locate the Cruise Control buttons on the left side of the multi-function steering wheel.
Press the button to activate the Cruise Control.
A speedometer icon will appear in the instrument cluster display.
Set Cruising Speed
When you reach your desired cruising speed, press the button on the multi-function steering wheel.
A green cruise control indicator light will illuminate in the instrument cluster display.
To increase/decrease the speed by 1 mph increments, press and release the -
To increase/decrease the speed by 5 mph increments, press and hold the -
Cancel and Resume
To cancel the cruise speed, press the brake pedal or press the button once on the multi-function steering wheel.
The green cruise indicator light will disappear. Your last selected speed stays in memory until you turn off the ignition or turn Cruise Control off.
To resume your set speed, press the multi-function steering wheel.
Turning Cruise Control System Off
Press twice.
Optional feature shown.
Comfort Drive Travel Assist
Within system limits, the Comfort Travel Assist system enables your car to steer, accelerate, and brake automatically within its lane.
Comfort Travel Assist can also maintain a constant distance to vehicles in front selected by the driver. The driver must maintain active supervision and the Comfort Travel Assist is not an autonomous feature.
To enable, press the button on the steering wheel.
Driver Assistance Features
in your Owner’s Manual for more detailed information and for important safety warnings.
Adaptive Cruise Control
Adaptive Cruise Control (ACC) helps maintain an individually stored constant speed and a previously set distance in time intervals between your vehicle and those in front of you. When you approach a slower moving vehicle in front of you, the vehicle may brake if the situation requires. When the vehicle is no longer present, ACC will accelerate back to the stored speed.
You can set the speed-dependent distance from the vehicle ahead to one of five levels.
When the indicator light illuminates in the instrument cluster.
To change the ACC distance interval, press the button to cycle through the distance intervals. When the shortest interval is reached, the distance returns to the greatest interval when the button is pressed again.
After coming to a stop for more than 3 seconds, briefly press the accelerator pedal or press multi-function steering wheel to resume Adaptive Cruise Control.Note: This feature is not a substitute for attentive driving. See the Owner’s Manual for further details and important limitations. Adaptive Cruise Control is available only on select trim lines.
Deactivate Adaptive Cruise ControlApplies to vehicles equipped with Adaptive Cruise Control.
To deactivate Adaptive Cruise Control, and use Conventional Cruise Control:
Press the button. Depending on vehicle equipment, it may be on the steering wheel or the end of the turn signal stalk.
Using the vertical menu buttons on the steering wheel, scroll to
Select then press the button.
Adaptive Cruise Control is now deactivated, and your vehicle will maintain the set speed using conventional cruise controlNote: Switching between Adaptive Cruise Control and Cruise Control requires the user to press RES on the steering wheel to resume either Adaptive Cruise Control or Cruise Control.
Assistance System Settings
If your vehicle is equipped with Driver Assistance features, you can access the Assistance system settings menu in the Infotainment system, allowing modification to the Driver Assistance feature operation.
Press the Menu button.
Press the
Touch the image that represents the feature.
OR
Touch to access
Disabling Park Distance Control Audible Tone
The audible tone from the Park Distance Control System can be disabled by pressing the button on the center console. The warning will reactivate automatically when the reverse gear is engaged or the button is pressed again.
Watch the Cruise Control video.
Watch the Comfort Travel Assist video.
Watch the Deactivate ACC video.
Dramatization.

Tire Pressure Monitoring System (TPMS) Recalibration
The TPMS must be recalibrated each time the tire pressure in one or more tires has been adjusted or after one or more tires has been changed, exchanged or repaired. To recalibrate the TPMS:
1. Turn the ignition ON.
2. Press the
3. Select
4. Select
5. Select
6. Select
Keyless Access
Unlock
1. Make sure you have your key fob with you.
2. Slide hand behind driver or front passenger door handle and wait for the door to unlock. Remember to avoid touching the indent on the front of the handle or the door will remain locked.
3. By touching the unlocking sensor twice in a row, the two front doors will unlock on the SE trim model.
4. PuII the handle to open door.
Lock
1. Make sure you have your key fob with you.
2. Touch your thumb to the lock depression on the handle. Note: Select trim lines are equipped with 2-door kessy or 4-door kessy.
Customize which Doors to Unlock with
Keyless Access
1. Make sure the vehicle is parked. The vehicle will not allow you to customize Keyless Access while driving.
2. Select
3. Select
4. Select
5. Select unlock with keyless entry.
”All doors” unlocks all doors.
”Single door” unlocks only the driver’s door.
”Vehicle side” unlocks the door(s) on the side of the vehicle where the key is at the moment.
Hand placement is showing unlock position.
TPMS / Keyless Access / Wipers
Windshield Wipers and Washer
Intermittent
From the to activate the intermittent wipers with rain-sensing.
The switch on top of the stalk varies the time interval between each wipe.
The farther the switch is moved to the right, the shorter the interval between each wipe.Note: Ensure wiper stalk is in OFF position before entering a car wash.
Rain-Sensing Wipers
To activate and deactivate wipers using the Infotainment touchscreen:
Select
Select
Select
Select Note: Applies to vehicles equipped with rain sensors.
Continuous
LOW
HIGH
Rear Wiper
To operate, push the lever one click away from you. If you have the front wipers on and you put the car in Reverse, the rear wiper activates a single wipe.
Service Position
With hood closed and ignition off, press and hold the windshield lever down. Wipers will move into the service position. Lift the wipers by the arms up from the windshield. Before driving, fold wiper arms back onto the windshield. Turn ignition ON, and press the wiper lever down briefly. The wipers will then move back to the Park position.
in your Owner’s Manual for more detailed information and for important safety warnings.
Watch the Keyless Access video.
Watch the Windshield Wipers video.