12
Hybrid Synergy Drive System
The Hybrid Synergy Drive System utilizes a computer-controlled gasoline engine
and electric motor to provide the most efficient combination of power for the
vehicle. When the brakes are applied, the braking force generates electricity, which
is then sent to the traction battery to conserve energy. In addition, the engine shuts
off when the vehicle is stopped. The benefits are better fuel economy and reduced
vehicle emissions.
NOTE: Fuel consumption and energy information of the Hybrid System are
shown on the Multi-Information Display (MID) and the audio system
screen (navigation system or multi-media system.)
- Ensure tire pressures are maintained at levels specified in the Owner’s Manual.
- Link trips to reduce engine cold starts whenever possible.
- Avoid driving at speeds that are higher than necessary, especially on the highway.
- When possible, avoid sudden stops to maximize regenerative braking energy.
- Minimize use of the Air Conditioning.
Put the shift lever in “Park.”
Depress the brake pedal, and “
w J O . * %
P S i w J O . * %
X J M M C F
displayed on the Multi-Information Display.
1 V T I U I F i 1 0 8 & 3 w C V U U P O C S J F G M Z B O E G J S N M Z
The “READY” light will blink. After a few seconds, when the light remains steady
and a beep sounds, shift the gear to the desired position and you may begin
driving.
FEATURES & OPERATIONS
TIPS FOR IMPROVED FUEL ECONOMY
STARTING THE HYBRID SYSTEM
Steering lock release
Push Turn
When the steering lock cannot be
released, “Push Power Switch while
Turning Steering Wheel in Either Direction”
will be displayed on the multi-information
display. Check that the shift lever is set in
P. Press the “POWER” switch shortly and
firmly while turning the steering wheel left
and right.
16
FEATURES & OPERATIONS
1. When the liftgate reaches the desired height, push the rear liftgate close-button
P O U I F E P P S K B N P G U I F M J G U H B U F
P O D F 1 S F T T B O E I P M E U I F C V U U P O V O U J M U I F C V [ [ F S
T P V O E T U J N F T
2. To reset the height, with the liftgate open and not moving, press and hold the rear
liftgate close-button until the buzzer sounds 4 times, and continue to hold until it
buzzes again, then let go. Push the same button to close the liftgate. When you
next open the liftgate, it will open to the maximum height.
3. To set the height using the Multi-Information Display, press “
” or “ ”
of the meter control switches and select “Vehicle settings” from “
” screen.
Press “
” or “ ” and select “ 1 # %
w B O E U I F O Q S F T T i.” Select
“Opening Adjustment,” then press “
w 4 F M F D U E F T J S F E Q P T J U J P O I F J H I U P Q U J P O T
U P D I P P T F G S P N
U I F O Q S F T T i
.”
NOTE: If battery is disconnected, the power back door needs to be reinitialized.
Instrument panel
Power Liftgate (back door)
Open: Push and hold
Close: Push and hold again
(close only)(open only)
HEIGHT ADJUSTABLE FUNCTION
Height Adjustable, Hands-Free
Power Liftgate
Sensor areaPerform the entire kick operation
within 1 second.
Carry Smart
Key remote
HANDS-FREE FUNCTION
