Page 163 of 608

1633-5. Opening, closing the windows and moon roof
3
Operation of each component
■The moon roof can be operated when
Vehicles without a smart key system
The engine switch is in the “ON” position.
Vehicles with a smart key system
The engine switch is in IGNITION ON mode.
■ Operating the moon roof after turning the engine off
Vehicles without a smart key system
The moon roof can be operated for approximately 45 seconds even  after the
engine switch is turned to the “ACC” or “LOCK” position. It cannot, however,
be operated once either front door is opened.
Vehicles with a smart key system
The moon roof can be operated for approximately 45 seconds even  after the
engine  switch  is  turned  to  ACCESSORY  mode  or  turned  off.  They  cannot,
however, be operated once either front door is opened.
■ Jam protection function
If an object is detected between the moon roof and the frame wh ile the moon
roof  is  closing  or  tilting  down,  travel  is  stopped  and  the  moon   roof  opens
slightly.
■ To reduce moon roof wind noise
When  the  moon  roof  is  opened  automatically,  it  will  stop  slightly  before  the
fully open position. Driving with the moon roof in this position can help reduce
wind noise.
■ Sunshade
The  sunshade  can  be  opened  and  closed  manually.  However,  the su nshade
will open automatically when the moon roof is opened.  
     
        
        Page 166 of 608
166
4-1. Before drivingDriving the vehicle............. 168
Cargo and luggage ........... 178
Vehicle load limits ............. 182
Trailer towing .................... 183
Dinghy towing ................... 200
4-2. Driving procedures Engine (ignition) switch (vehicles without 
a smart key system) ........ 201
Engine (ignition) switch  (vehicles with a smart 
key system)..................... 204
Automatic transmission ..... 210
Manual transmission ......... 215
Turn signal lever ............... 217
Parking brake .................... 218
4-3. Operating the lights and  wipers
Headlight switch ................ 219
Automatic High Beam ....... 223
Fog light switch ................. 228
Windshield wipers and  washer ............................ 229
4Driving 
     
        
        Page 201 of 608
2014-2. Driving procedures
4
Driving
Engine (ignition) switch (vehicles without a 
smart key system)
Automatic transmission
Check that the parking brake is set.
Check that the shift lever is set in P.
Firmly depress the brake pedal.
Turn the engine switch to the “S TART” position to start the engine.
Manual transmission
Check that the parking brake is set.
Check that the shift lever is set in N.
Firmly depress the clutch pedal.
Turn the engine switch to the “S TART” position to start the engine.
“LOCK”
The  steering  wheel  is  locked  and
the  key  can be  removed.  (Vehicles
with  an  automatic  transmission:
The  key  can  be  removed  only
when the shift lever is in P.)
“ACC”
Some  electrical  components  such
as the audio system can be used.
“ON”
All electrical components can be used.
“START”
For starting the engine.
Starting the engine
Changing the engine  switch positions
1
2
3
4
1
2
3
4
1
2
3
4 
     
        
        Page 204 of 608
2044-2. Driving procedures
Engine (ignition) switch (vehicles with a 
smart key system)
Check that the parking brake is set.
Check that the shift lever is in P.
Firmly depress the brake pedal.
  and  a  message  will  be  dis-
played on the multi-information dis-
play. 
If  it  is  not  displayed,  the  engine
cannot be started.
Press  the  engine  switch  shortly
and firmly. 
When  operating  the engine  switch,
one  short,  firm  press  is  enough.  It
is  not  necessary  to  press  and  hold
the switch.
The  engine  will  crank  until  it  starts
or for up to 30 seconds, whichever
is less.
Continue  depressing  the  brake
pedal until the engine is completely
started.
The  engine  can  be  started  from
any engine switch mode.
Performing  the  following  opera tions  when  carrying  the  elec-
tronic  key  on  your  person  starts  the  engine  or  changes  engine
switch modes.
Starting the engine
1
2
3
4 
     
        
        Page 205 of 608
2054-2. Driving procedures
4
Driving
Stop the vehicle.
Set the parking brake (P. 218), and shift the shift lever to P.
Press the engine switch.
Release  the  brake  pedal  and  chec k  that  the  display  on  the  instru-
ment cluster is off.
Modes  can  be  changed  by  pressing  the  engine  switch  with  brake
pedal released. (The mode changes  each time the switch is pressed.)
Off
*
The  emergency  flashers  can  be
used.
ACCESSORY mode
Some  electrical  components  such
as the audio system can be used.
“ACCESSORY”  will  be  displayed
on the multi-information display.
IGNITION ON mode
All  electrical  components  can  be
used.
“IGNITION  ON”  will  be  displayed
on the multi-information display.
*: If  the  shift  lever  is  in  a  position other  than  P  when  turning  off  the
engine,  the  engine  switch  will  be
turned  to ACCESSORY  mode,  not
to off.
Stopping the engine
Changing engine  switch modes
1
2
3
4
1
2
3 
     
        
        Page 206 of 608

2064-2. Driving procedures
If  the engine is stopped with the shift lever in a position other than P,
the  engine  switch  will  not  be  turned  off  but  instead  be  turned  to
ACCESSORY  mode.  Perform  the  following  procedure  to  turn  the
switch off:
Check that the park ing brake is set.
Shift the shift lever to P.
Check that “Turn Power OFF” is displayed on the multi-informati on
display and then press the engine switch once.
Check that “Turn Power OFF” on the multi-information display is  off.
■Auto power off function
If the vehicle is left in ACCESSORY mode for more than 20 minut es or IGNI-
TION  ON  mode  (the  engine  is  not  running)  for  more  than  an  hour  with  the
shift  lever  in  P,  the  engine  switch  will  automatically  turn  off.  However,  this
function  cannot  entirely  prevent  battery  discharge.  Do  not  leav e  the  vehicle
with the engine switch in ACCESSORY or IGNITION ON mode for lon g peri-
ods of time when the engine is not running.
■ Automatic engine shut off feature (except for New Caledonia)
●The  vehicle  is  equipped  with  a  feature  that  automatically  shuts off the
engine  when  the  shift  lever  is  in  P  with  the  engine  running  for   an  extended
period.
● The  engine  will  automatically  shut  off  after  approximately  1  ho ur  if  it  has
been left running while the shift lever is in P.
● The  timer  for  the  automatic  engine  shut  off  feature  will  reset  if  the  brake
pedal is depressed or if the shift lever is in a position other  than P.
● After  the  vehicle  is  parked,  if  the  door  is  locked  with  the  door  lock  switch
(P. 121) from the inside or the mechanical key ( P. 522) from the outside,
the automatic engine shut off feature will be disabled. The tim er for the auto-
matic  engine  shut  off  feature  will  be  re-enabled  if  the  driver’ s  door  is
opened.
■ Electronic key battery depletion
P. 116
■ Conditions affecting operation
P. 134
■ Note for the entry function
P. 135
When stopping the engine with the  shift lever in a position other
than P
1
2
3
4 
     
        
        Page 209 of 608

2094-2. Driving procedures
4
Driving
NOTICE
■To prevent battery discharge
● Do  not  leave  the  engine  switch  in ACCESSORY  or  IGNITION  ON  mode
for long periods of time without the engine running.
● If “ACCESSORY” or “IGNITION ON” is displayed on the multi-infor mation
display while the engine is not running, the engine switch is n ot off. Exit the
vehicle after turning the engine switch off.
● Do not stop the engine when the shift lever is in a position ot her than P. If
the engine is stopped in another shift lever position, the engi ne switch will
not be turned off but instead be turned to ACCESSORY mode. If t he vehi-
cle is left in ACCESSORY mode, battery discharge may occur.
■ When starting the engine
● Do not race a cold engine.
● If the engine becomes difficult to start or stalls frequently,  have your vehi-
cle checked by your Toyota dealer immediately.
■ Symptoms indicating a malfunction with the engine switch
If the engine switch seems to be operating somewhat differently  than usual,
such  as  the  switch  sticking  slightly,  there  may  be  a  malfunctio n.  Contact
your Toyota dealer immediately. 
     
        
        Page 210 of 608
2104-2. Driving procedures
Automatic transmission
Vehicles without a smart key system:While  the  engine  switch  is  in  the  “ON”  position,  move  the  shiftlever with the brake pedal depressed.
When shifting the shift lever between P and D, make sure that t he vehi-
cle is completely stopped. 
Vehicles with a smart key system:
While the engine switch is in IGNITION ON mode, move the shiftlever with the brake pedal depressed.
When shifting the shift lever between P and D, make sure that t he vehi-
cle is completely stopped.
: If equipped
Shifting the shift lever