2021 TOYOTA RAV4 PRIME door lock

RAV4 PRIME_QG_OM42B93U_(U)
132. Charging operation
2
Charging operation
■Opening the charging port lid
Press the central rear edge of
the charging port lid (the loca-
tion shown in the illustration)
with the doors unlocked.
Push and take your hand away
to slightly open the charging port
lid. Then open the lid fully by
hand.
■
Closing the charging port lid
Close the charging port lid and
press the central rear edge of
the charging port lid (the loca-
tion shown in the illustration).
When the doors are locked, the
charging port lid is also locked.
The illumination/flashing pattern
changes to inform the user of the
charging status.
For details about charging indica-
tor, refer to “OWNER’S MANUAL”.
Opening and closing the charging port lid
Charging indicator

16
RAV4 PRIME_QG_OM42B93U_(U)
2. Charging operation
Prepare the AC charging cable.
Insert the AC charging cable
into the outlet of the external
power source.
Make sure to hold the body of the
plug and insert it firmly into the out-
let.
Check that the power indicator on
the CCID (Charging Circuit Inter-
rupting Device) is illuminated.
In order to reduce the load on the
outlet and plug, when inserting the
plug, use a string, etc. to hang the
CCID (Charging Circuit Interrupting
Device) on a hook or equivalent.
Unlock the doors and open the
charging port lid.
The AC charging inlet light ()
will illuminate.
Remove the AC charging inlet
cap and secure it into the
holder on the charging port lid.
When charging
1
2
3
A
4

RAV4 PRIME_QG_OM42B93U_(U)
192. Charging operation
2
Charging operation
Unlock the doors to unlock the charging connector.
The charging connector will be unlocked and the AC charging inlet light will
illuminate when the doors are unlocked.
Pull the charging connector
towards you while pressing the
latch release button.
If the latch release button is
pressed during charging (while the
charging indicator is illuminated),
charging will be interrupted.
Attach the charging connector cap.
Attach the AC charging inlet ca p and close the charging port lid.
Remove the plug from the outlet when the charging equipment will
not be used for a prolonged period of time.
Hold the body of the plug when removing.
Make sure to put the cable away immediately after disconnecting .
When leaving the plug inserted, inspect the plug and connector once a
month to check if dirt or dust has accumulated.
After charging
1
2
WARNING
■ AC charging inlet
Do not disassemble, repair or modify the AC charging inlet. Doi ng so may
lead to unforeseen accidents or serious injury. When the AC cha rging inlet
needs to be repaired, consult your Toyota dealer.
3
4
5