Page 359 of 740

PRIUS_OM_OM47E09U_(U)
3594-5. Using the driving support systems
4
Driving
■Conditions  under  which  the  Rear  C ross  Traffic  Alert  function  will  not
detect a vehicle
The  Rear  Cross  Traffic Alert  function  is  not  designed  to  detect   the  following
types of vehicles and/or objects:
● Vehicles approaching from directly behind
● Vehicles backing up in a parking space next to your vehicle
● Guardrails, walls, signs, parked vehicles and similar stationar y objects
*
●Small motorcycles, bicycles, pedestrians, etc.*
●Vehicles moving away from your vehicle
● Vehicles approaching from the parking spaces next to your vehic le
*
*
: Depending  on  the  conditions,  detection  of  a  vehicle  and/or  obj ect  may
occur.
■ Conditions under which the Rear C ross  Traffic  Alert  function  may  not
function correctly
● The Rear Cross Traffic Alert function may not detect vehicles correctly in the
following situations:
• When the sensor is misaligned due to a strong impact to the se nsor or its
surrounding area
• When  mud,  snow,  ice,  a  sticker,  etc.  is  covering  the  sensor  or   surround-
ing area on the rear bumper
• When driving on a road surface that is wet with standing water  during bad
weather, such as heavy rain, snow, or fog
• When  multiple  vehicles  are  approaching  with  only  a  small  gap  b etween
each vehicle
• When a vehicle is approaching at high speed
●
Vehicles  that  the  sensors  cannot  detect
due to obstructions 
     
        
        Page 360 of 740
360
PRIUS_OM_OM47E09U_(U)
4-5. Using the driving support systems
• Immediately after the Blind Spot Monitor function is turned on
• Immediately after the hybrid system is started with the Blind  Spot Monitor
function on
• When  backing  up  on  a  slope  with  a
sharp change in grade
• When  backing  out  of  a  shallow  angle parking spot
• When  the  sensors  cannot  detect  a vehicle due to obstructions 
     
        
        Page 362 of 740
362
PRIUS_OM_OM47E09U_(U)
4-5. Using the driving support systems
Intuitive parking assist
Front corner sensors
Front center sensors
Rear corner sensors
Rear center sensors
Front side sensors
Rear side sensors
The intuitive parking assist can be
enabled/disabled  on  the 
screen  ( P.  151)  of  the  multi-
information display.
When on is selected, intuitive park-
ing assist indicator will come on.
Once off is selected, the intuitive parking assist will not return to on until it
is turned to on by the   screen of multi-information display again. (The
system does not automatically return to on even when the hybrid  system is
restarted.)
: If equipped
The distance from your vehicle to nearby obstacles when paral-
lel  parking  or  maneuvering  into  a  garage  is  measured  by  the
sensors  and  communicated  via  the  displays  and  a  buzzer.
Always check the surrounding ar ea when using this system.
Types of sensors
1
2
3
4
5
6
Turning the intuitive parking assist on/off 
     
        
        Page 367 of 740

PRIUS_OM_OM47E09U_(U)
3674-5. Using the driving support systems
4
Driving
■Operation conditions
The power switch is turned on.
●Front corner sensors:
• Shift position is not in P
• Vehicle speed is approximately 6 mph (10 km/h) or less
● Front side sensors/rear side sensors:
• Shift position is not in P
• Vehicle speed is approximately 6 mph (10 km/h) or less
• Steering wheel is turned approximately 90  or more
● Front center sensors:
• Shift position is not in P or R
• Vehicle speed is approximately 6 mph (10 km/h) or less
● Rear corner sensors/rear center sensors:
Shift position is in R
■ Intuitive parking assist pop-up display
P. 390
■ Sensor detection information
●The  sensor’s  detection  areas  are  limited  to  the  areas  around  th e  vehicle’s
bumper.
● Depending on the shape of the obstacle and other factors, the detection dis-
tance may shorten, or detection may be impossible.
● Obstacles may not be detected if they are too close to the sens or.
● There  will  be  a  short  delay  between  obstacle  detection  and  disp lay.  Even
when  traveling  at  a  low  speed,  if  you  come  too  close  to  an  obstacle  before
the display and buzzer activate, the display and buzzer may not activate at
all.
● Thin  posts  or  objects  lower  than  the  sensor  may  not  be  detected   when
approached, even if they have been detected once.
● It  might  be  difficult  to  hear  beeps  due  to  the  volume  of  audio  system  or  air
flow noise of the air conditioning system. 
     
        
        Page 368 of 740

368
PRIUS_OM_OM47E09U_(U)
4-5. Using the driving support systems
■Obstacle warning function
When  an  obstacle  in  the  side  areas  is  within  the  vehicle  course  while the
vehicle  is  moving  forward  or  backward,  this  function  inform  the   driver  by  the
display and the buzzer.
■ Obstacle detection in side areas
●Obstacles in the side areas are detected while driving by scann ing the side
areas with the side sensors. Recognized obstacles are retained  in memory
for up to approximately 2 minutes.
● Obstacles  may  not  be  detected  in  the  side  areas  until  the  scan  completes.
After  the  power  switch  is  turned  on,  scanning  completes  after  driving  the
vehicle for a short period of time.
● When an obstacle such as another vehicle, pedestrian or animal  is detected
by the side sensors, the obstacle may continue to be detected e ven after it
has left the side sensor detection area.
■ If  “Clean  Parking  Assist  Sensor”   is  displayed  on  the  multi-information
display
A  sensor  may  be  dirty  or  covered  with  snow  or  ice.  In  such  case s, if it is
removed from the sensor, the system should return to normal.
Also,  due  to  the sensor  being  frozen  at  low  temperatures,  a  mal function dis-
play may appear or an obstacle may not be detected. If the sens or thaws out,
the system should return to normal.
■ If “Parking Assist Malfunction”  is displayed on the multi-information dis-
play
Depending  on  the  malfunction  of  the  sensor,  the  device  may  not  be  working
normally. Have the vehicle inspected by your Toyota dealer.
■ Certification (Canada only)
This ISM device complies with Canadian ICES-001.
■ Customization
Settings (e.g. buzzer volume) can be changed.
(Customizable features:  P. 690)
Obstacle
Calculated vehicle course
1
2 
     
        
        Page 369 of 740
PRIUS_OM_OM47E09U_(U)
3694-5. Using the driving support systems
4
Driving
WARNING
■When using intuitive parking assist
Observe the following precautions to avoid an unexpected accident.
● Do not exceed the speed limit of 6 mph (10 km/h).
● The sensors’ detection areas and reaction times are limited. When moving
forward  or  reversing,  check  the  areas  surrounding  the  vehicle  ( especially
the  sides  of  the  vehicle)  for  safety,  and  drive  slowly,  using  t he  brake  to
control the vehicle’s speed.
● Do not install accessories within the sensors’ detection areas. 
     
        
        Page 370 of 740

370
PRIUS_OM_OM47E09U_(U)
4-5. Using the driving support systems
WARNING
■Sensors
Certain  vehicle  conditions  and  the  surrounding  environment may  affect  the
ability of the sensor to correctly detect obstacles. Particular  instances where
this may occur are listed below.
● There  is  dirt,  snow  or  ice  on  the  sensor.  (Wiping  the  sensors  w ill  resolve
this problem.)
● The sensor is frozen. (Thawing the area will resolve this probl em.) 
In  especially  cold  weather,  if  a  sensor  is  frozen,  the  screen  m ay  show  an
abnormal display, or obstacles may not be detected.
● The sensor is covered in any way.
● In harsh sunlight or intense cold weather
● On an extremely bumpy road, on an incline, on gravel, or on grass
● The  vicinity  of  the  vehicle  is  noisy  due  to  vehicle  horns,  moto rcycle
engines, air brakes of large vehicles, or other loud noises pro ducing ultra-
sonic waves.
● The sensor is splashed with water or drenched with heavy rain.
● The sensor is drenched with water on a flooded road.
● The vehicle is leaning considerably to one side.
● The vehicle is equipped with a fender pole or wireless antenna.
● The vehicle is approaching a tall or curved curb.
● The area directly under the bumpers is not detected.
● If obstacles draw too close to the sensor.
● The bumper or sensor receives a strong impact.
● A non-genuine Toyota suspension (lowered suspension etc.) is in stalled.
● There is another vehicle equipped with parking assist sensors i n the vicin-
ity.
● Towing eyelets are installed.
● A backlit license plate is installed.
In addition to the examples above, depending on the shape and c ondition of
obstacles,  detection  may  not  be  possible,  or  the  detection  rang e  may  be
shortened. 
     
        
        Page 371 of 740

PRIUS_OM_OM47E09U_(U)
3714-5. Using the driving support systems
4
Driving
WARNING
■Side sensors
In  the  following  situations,  the  intuitive  parking  assist  may  n ot  operate  nor-
mally and may result in an unexpected accident. Drive carefully .
● Obstacles may not be detected in the side areas until the vehic le is driven
for a short time and a scan of the side areas is completed. ( P. 368)
● Even  after  the  scan  of  the  side  areas  is  completed,  obstacles  s uch  as
other vehicles, people or animals that approach from the sides cannot be
detected.
● Even after the scan of the side areas is completed, obstacles may not be
detected depending on the surrounding situation of the vehicle.
At that time, the side sensor operation displays ( P. 363) temporary turn
off.
■ Obstacles which may not  be properly detected
The  shape  of  the  obstacle  may  prevent  the  sensor  from  detecting   it.  Pay
particular attention to the following obstacles:
● Wires, fences, ropes, etc.
● Cotton, snow and other materials that absorb sound waves
● Sharply-angled objects
● Low obstacles
● Tall  obstacles  with  upper  sections  projecting  outwards  in  the  d irection  of
your vehicle
● People may not be detected if they are wearing certain types of  clothing.
● Moving objects such as people or animals