2021 TOYOTA COROLLA HYBRID display

13
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Tilt & telescopic steering wheel
NOTE: Do not attempt to adjust while the vehicle is in motion. Lock release lever
Angle
Length
Hold wheel, push lever down, set angle and length, and return lever.
Windows-Power
Up
Down
Driver sideWindow lock switch
All window auto up/down
Push the switch completely down or pull it completely up and release to \
fully open
or close. To stop the window partway, operate the switch in the opposite\
direction.
Window lock switch
Deactivates all passenger windows. Driver’s window remains operable. \
When the steering lock cannot be released, “Push Power Switch while T\
urning
Steering Wheel in Either Direction” will be displayed on the multi-information display.
Press the power switch shortly and firmly while turning the steering whe\
el left and
right.
Steering lock release
Indicator
Driving mode select
Normal mode
Suitable for normal driving.
POWER mode
Controls the hybrid system to provide quick, powerful acceleration. Maki\
ng it
suitable for when agile driving response is desired, such as when drivin\
g on roads
with many curves.
ECO drive mode
Helps the driver accelerate in an eco-friendly manner and improve fuel e\
conomy
through moderate throttle characteristics and by controlling the operati\
on of the air
conditioning system (heating/cooling).
Refer to the Owner’s Manual for more details.
Use EV drive mode when driving short distances to reduce noise early in \
the morn-ing and late at night in residential areas or to cut emissions when park\
ing in a small
garage or indoor car park.
145651_Corolla_Hybrid_QRG_guts.indd 133/23/20 4:10 PM

14
FEATURES & OPERATIONSElectric parking brake
Driver sideAutomatic modeManual mode
Automatic (shift lever operation)
To turn automatic mode ON, while vehicle is stopped, pull and hold switc\
h until
“EPB Shift Interlock Function Activated” displays in Multi-Informa\
tion Display (MID).
While depressing brake, shifting into P position will automatically set \
the brake
and turn the parking brake indicator and parking brake light on. To rele\
ase brake,
depress brake and shift out of P. The indicator light and the light on t\
he switch turn
off.
To turn automatic mode OFF, push and hold parking brake switch until “\
EPB Shift
Interlock Function Deactivated” displays on the MID.
Manual
While vehicle is stopped and brake pedal is depressed, pull to set parki\
ng brake
and turn the parking brake indicator and parking brake light on. To rele\
ase, press
the brake pedal and push switch. The indicator and the light turn off.
The brake hold system keeps the brake applied when the shift lever is in\
D, B or N
with the system on and the brake pedal has been depressed to stop the ve\
hicle.
The system releases the brake when the accelerator pedal is depressed wi\
th the
shift lever in D or B to allow smooth start off.
Refer to the Owner’s Manual for limitations and more details.
Refer to the Owner’s Manual for limitations and more details.
Standby indicatorOperated indicator
BRAKE HOLD
PARKING BRAKE
ON ON
SET
OFF OFFRELEASE
Parking brake light
Push “ ” or “ ” and “” on steering wheel to change and select information in
the following:
Meter control switches 7-inch display
145651_Corolla_Hybrid_QRG_guts.indd 143/23/20 4:10 PM

15
Electric parking brake
Manual mode
Automatic (shift lever operation)
To turn automatic mode ON, while vehicle is stopped, pull and hold switc\
h until
“EPB Shift Interlock Function Activated” displays in Multi-Informa\
tion Display (MID).
While depressing brake, shifting into P position will automatically set \
the brake
and turn the parking brake indicator and parking brake light on. To rele\
ase brake,
depress brake and shift out of P. The indicator light and the light on t\
he switch turn
off.
To turn automatic mode OFF, push and hold parking brake switch until “\
EPB Shift
Interlock Function Deactivated” displays on the MID.
Manual
While vehicle is stopped and brake pedal is depressed, pull to set parki\
ng brake
and turn the parking brake indicator and parking brake light on. To rele\
ase, press
the brake pedal and push switch. The indicator and the light turn off.
The brake hold system keeps the brake applied when the shift lever is in\
D, B or N
with the system on and the brake pedal has been depressed to stop the ve\
hicle.
The system releases the brake when the accelerator pedal is depressed wi\
th the
shift lever in D or B to allow smooth start off.
Refer to the Owner’s Manual for limitations and more details.
Refer to the Owner’s Manual for limitations and more details.
Driving support system status display area
Content display area
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Push “” or “” and “” on steering wheel to change and select information in
the following:
Multi-Information Display (MID)
Meter control switches 7-inch display
Previous screen
Push: enter/
Push and hold: reset
Scroll/search screens
Driving support system information display Driving information display
Vehicle information display
Audio system-linked display
Settings display
Warning message display
145651_Corolla_Hybrid_QRG_guts.indd 153/23/20 4:10 PM

20
FEATURES & OPERATIONS
Audio
NOTE: Concentrating on the road should always be your first priority while
driving. Always use safe driving practices and follow all traffic rules.
Refer to the “Navigation and Multimedia System Owner’s Manual” or vi\
sit www.
toyota.com/audio-multimedia for additional resources.
Touch screen display
Access
AUDIO screen
Push to turn ON/OFF or
turn to adjust volume Turn to tune radio stations
manually or select tracks or filesAccess
Bluetooth
hands-free system
Seek station/
track/file
select
Access
HOME screen
Access
MENU screen
Access
APPS screen
Access
MAP screen
Bluetooth® technology allows dialing or receipt of calls without removing your han\
ds
from the steering wheel.

Refer to the Bluetooth® device pairing in this guide or the Navigation and
Multimedia System Owner’s Manual for additional user instructions.
NOTE: Concentrating on the road should always be your first priority while
driving. Always use safe driving practices and follow all traffic rules.
Volume control
145651_Corolla_Hybrid_QRG_guts-r1.indd 203/24/20 9:10 AM

22
FEATURES & OPERATIONSAir conditioning/heating
Temperature control Fan speed
Windshield
defogger
Air Conditioning
ON/OFF
Climate control OFF Eco air
conditioning mode
Automatic climate control ON
Adjusting the temperature setting
will cause the airflow vents,
air intake and fan to adjust
automatically to set temperature.
Airflow vent mode
Outside rearview
mirror defogger/Rear
window defogger Recirculate cabin air
(outside air when OFF)S-FLOW
modeFRONT
FRONT (DOOR MOUNTED)
To find your system, refer to Audio section of this guide.
1) Push “MENU” button next to the screen.
2) Select “Setup” or “General” in the touch screen to access the general settings
screen.
3) Select “Clock.”
4) Then select desired items to be reset.
Refer to the “Navigation and Multimedia System Owner’s Manual” \
for more details.
* Premium Audio only.
Select to change time zone
Select to daylight savings
time ON/OFF/AUTO.*
Select to set to automatic
GPS adjustment of clock.
Select to set hour display
to 12 or 24 hour time.
Clock
AUTOMATIC AIR CONDITIONING
145651_Corolla_Hybrid_QRG_guts.indd 223/23/20 4:11 PM

24
FEATURES & OPERATIONS
The VSC OFF switch can be used to help free a stuck vehicle in surroundi\
ngs like
mud, dirt or snow. While the vehicle is stopped, press switch to disable\
the TRAC
system.
To disable both VSC and TRAC systems, press and hold the switch for at l\
east 3
seconds.
Refer to the Owner’s Manual for limitations and more details.
The rear view monitor system displays an image of the view from the bump\
er of
the rear area of the vehicle. The camera for the rear view monitor syste\
m is located
above the license plate.
To adjust the image on the rear view monitor screen, press the “MENU”\
button and
select “Display” on the screen. Select “Camera” to adjust th\
e screen contrast and
brightness.
Refer to the Owner’s Manual and the Navigation and Multimedia Owner‘\
s Manual
for limitations and more details on this system.
Blind Spot Monitor (BSM) and Rear Cross
Traffic Alert (RCTA)
(if equipped)
Buzzer** RCTA only
The system is designed to use radar sensors to detect vehicles traveling\
in the
Corolla HV’s blind spot when to change lanes. If a vehicle is detecte\
d, the driver
will be alerted via the outside rear view side mirror indicators.
While in reverse, when a vehicle approaching from the right or left rear\
of the
Corolla HV is detected, the outside rear view mirror indicators will fla\
sh. Also, the
RCTA icon for the detected side will be displayed on the audio system di\
splay, and
the RCTA buzzer will sound.
Refer to the Toyota Owner‘s Manual for limitations and more details o\
n this system
before attempting to use it.
BLIND SPOT MONITOR (BSM)
REAR CROSS TRAFFIC ALERT (RCTA)
IndicatorAudio system display*
Outside rear view
mirror indicators
Outside rear view
mirror indicators
Meter control
switches
145651_Corolla_Hybrid_QRG_guts.indd 243/23/20 4:11 PM

25
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
The VSC OFF switch can be used to help free a stuck vehicle in surroundi\
ngs like
mud, dirt or snow. While the vehicle is stopped, press switch to disable\
the TRAC
system.
To disable both VSC and TRAC systems, press and hold the switch for at l\
east 3
seconds.
Refer to the Owner’s Manual for limitations and more details.
Vehicle Stability Control (VSC)/
TRAC OFF switch
Rear view monitor system
The rear view monitor system displays an image of the view from the bump\
er of
the rear area of the vehicle. The camera for the rear view monitor syste\
m is located
above the license plate.
To adjust the image on the rear view monitor screen, press the “MENU”\
button and
select “Display” on the screen. Select “Camera” to adjust th\
e screen contrast and
brightness.
Refer to the Owner’s Manual and the Navigation and Multimedia Owner‘\
s Manual
for limitations and more details on this system.
Blind Spot Monitor (BSM) and Rear Cross
Traffic Alert (RCTA)
(if equipped)
* RCTA only
The system is designed to use radar sensors to detect vehicles traveling\
in the
Corolla HV’s blind spot when to change lanes. If a vehicle is detecte\
d, the driver
will be alerted via the outside rear view side mirror indicators.
While in reverse, when a vehicle approaching from the right or left rear\
of the
Corolla HV is detected, the outside rear view mirror indicators will fla\
sh. Also, the
RCTA icon for the detected side will be displayed on the audio system di\
splay, and
the RCTA buzzer will sound.
Refer to the Toyota Owner‘s Manual for limitations and more details o\
n this system
before attempting to use it.
145651_Corolla_Hybrid_QRG_guts.indd 253/23/20 4:11 PM

26
TOYOTA SAFETY SENSE™
Toyota Safety Sense™ 2.0 (TSS 2.0) is a set of active safety technologies designed
to help mitigate or prevent collisions across a wide range of traffic si\
tuations, in
certain conditions. TSS 2.0 is designed to help support the driver’s \
awareness,
decision making and vehicle operation contributing to a safe driving exp\
erience.
Refer to the Owner’s Manual for operation, setting adjustments, limitations and
more details to understand these functions and complete safety precautions. For
more information, please go to http://www.toyota.com/safety-sense
TSS 2.0 combines an in-vehicle camera mounted in front of the inside rea\
r view mirror
and a radar mounted in the front grill. These sensors support the driver\
assist systems.
The Pre-Collision System uses a radar sensor and camera sensor to help d\
etect a
vehicle or pedestrian or bicyclist in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control pe\
rformance that
this system can provide, do not overly rely on this system. This system \
will not prevent
collisions or lessen collision damage or injury in every situation. Do n\
ot use PCS
instead of normal braking operations under any circumstances. Do not att\
empt to test
the operation of the Pre-Collision System yourself, as the system may no\
t operate or
engage, possibly leading to an accident. In some situations, such as whe\
n driving in
inclement weather such as heavy rain, fog, snow or a sandstorm or while \
driving on a
curve and for a few seconds after driving on a curve, a vehicle or pedes\
trian or bicyclist
may not be detected by the radar and camera sensors, preventing the syst\
em from
operating or engaging properly.
Refer to the Toyota Owner’s Manual for a list of additional situation\
s in which the
system may not operate properly. Pre-Collision Warning
When the system determines that the possibility of a frontal collision i\
s high, a buzzer
will sound and a warning message will be displayed on the Multi-Informat\
ion Display
(MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide addi\
tional braking
force using Brake Assist. This system may prime the brakes and may apply\
greater
braking force in relation to how strongly the brake pedal is depressed.Quick overview-Toyota Safety Sense™ 2.0
Automatic High Beams (AHB)
AHB is designed to detect the headlights of oncoming vehicles and
the tail lights of preceding vehicles and switch between high beams
and low beams as appropriate. Road Sign Assist (RSA)
RSA is designed to recognize specific road signs using the forward
facing camera to provide information to the driver via the display.
Pre-Collision System with Pedestrian Detection (PCS w/PD)
PCS w/PD is designed to provide alert, mitigation, and/or avoidance
support in certain conditions, when the system detects a potential
collision with a preceding vehicle is likely to occur.
The advanced millimeter-wave radar sensor system is designed to work
with the camera sensor to help recognize a preceding pedestrian or
bicyclist, and provide an alert, mitigation and/or avoidance support in \
certain conditions.
Full-Speed Range Dynamic Radar Cruise Control (DRCC)
Full-Speed Range DRCC is designed to help maintain a pre-set
distance to a preceding vehicle when the preceding vehicle is traveling \
at a lower speed. The minimum set speed is approximately 20 MPH,
but once activated, the operating speed range is 0-110 MPH.
Lane Tracing Assist (LTA)
LTA is designed to help keep the vehicle in the center of a lane by
assisting the driver in steering control when using Full-Speed Range
DRCC.
Lane Departure Alert with Steering Assist (LDA w/SA)
LDA w/SA is designed to provide notification when the system detects
an unintended lane departure.
The Steering Assist function is designed to provide small corrective
steering inputs to the steering wheel for a short period of time to help\

keep the vehicle in its lane.
The Sway Warning function is designed to detect vehicle swaying
(based on the vehicle location and steering wheel operation) and alert\

the driver with an audio and visual alert, urging them to take a break.
145651_Corolla_Hybrid_QRG_guts.indd 263/23/20 4:11 PM