Page 9 of 68
7
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Malfunction/
Check Engine indicator1
Security indicatorMaster warning
1,2
Turn signal indicator
Pre-Collision System (PCS)
warning1,2
Slip indicator1,3
Vehicle Stability Control (VSC)
OFF indicator1
Parking brake indicator2
Rear passenger seat belt reminder
Rear Cross Traffic Alert (RCTA)
Indicator4
Sport mode indicator4
1
If the indicator does not turn off within a few seconds of starting the vehicle, there may be a
malfunction. Have the vehicle inspected by your Toyota dealer.
2 If the indicator flashes, there may be a malfunction. Refer to the Owner’s Manual.3 If the indicator flashes, it indicates that the system is operating.4 If equipped.5 Camry / Camry AWD only.6 Camry HV only.7 Refer to section PKSB (Parking Support Braking function) in the Owner’s Manual.
READY indicator6
RCD (Rear Camera Detection) OFF
indicator2,4
Page 12 of 68
10
OVERVIEW
Hood release
Instrument panel light control
Fuel tank door release & cap
NOTE: Tighten until one click is heard.
If the cap is not locked or tightened
enough, the Check Engine indicator
“
” may illuminate.
Turn to open Store
Push
Close
Push
DarkerBrighterPull up latch
and raise hood
Insert the rod to hold
hood open
Pull
Page 16 of 68
14 Hold wheel, push lever down, set angle and length, and
return lever.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Tilt and telescopic steering wheel
Smart KeyWithout Smart Key (if equipped)
Steering lock release
Push
or
Push Turn Turn Turn
(Camry HV)
Parking brake (if equipped)
When starting the engine, the engine
switch may seem stuck in the “LOCK”
position. To free it, turn the key while
turning the steering wheel slightly left
and right.A message informing the driver that the
steering wheel is locked will be displayed
on the Multi-Information Display.
Check that the shift lever is set in P.
Press the power button while turning the
steering wheel left and right.
Lock release leverAngle
Length
FEATURES & OPERATIONS