
5
Overview
Instruments and controls
1.Bonnet release
2. Dashboard fuses
3. Horn
4. Instrument panel 5.
Alarm
Courtesy lamp
Interior rear view mirror or Surround Rear 
Vision display screen
Emergency and assistance call buttons
6. Monochrome screen with audio system
Touch screen with PEUGEOT Connect 
Radio or PEUGEOT Connect Nav
7. USB port
8. Heating
Manual air conditioning
Dual-zone automatic air conditioning
Front demisting - defrosting
Rear screen demisting – defrosting
9. Electric parking brake
"START/STOP" button
10. Gearbox
11 . 12   V socket
12. 230   V accessory socket
13. Glove box
USB port (inside the glove box)
14. Storage compartment
15. Front passenger airbag deactivation (on the 
side of the glove box, with the door open)
Steering mounted controls
1.External lighting / direction indicators control 
stalk
Button to change the Surround Rear Vision 
view / voice recognition activation button
2. Wiper / screenwash / trip computer control 
stalk
3. Controls to select the multimedia source 
(SRC), manage music (LIST) and manage 
phone calls (" telephone" symbol)
4. Speed Limiter / Programmable Cruise Control 
/ Adaptive cruise control controls
5. Instrument panel display mode selection 
wheel
6. Voice control
Volume adjustment
7. Audio system setting controls  

7
Eco-driving
Eco-driving
Eco-driving refers to a range of everyday 
practices that allow the motorist to optimise their 
fuel consumption and CO
2emissions.
Optimise your use of the gearbox
With a manual gearbox, move off gently and 
change up promptly. While accelerating, change 
up early.
With an automatic gearbox, favour automatic 
mode and avoid pressing the accelerator pedal 
heavily or suddenly.
The gear efficiency indicator prompts you to 
engage the most suitable gear: whenever this 
indication is displayed on the instrument panel, 
follow it straight away.
With an automatic gearbox, this indicator 
appears only in manual mode.
Drive smoothly
Maintain a safe distance between vehicles, use 
engine braking rather than the brake pedal and 
press the accelerator gradually. These attitudes 
help to save fuel, reduce CO
2 emissions and 
decrease general traffic noise.
If the vehicle has the steering-mounted 
"CRUISE" control, use cruise control at speeds 
above 25 mph (40
 
km/h) when the traffic is 
flowing well.
Use electrical equipment wisely
Before moving off, if the passenger compartment 
is too warm, ventilate it by opening the windows 
and air vents before using the air conditioning.
At speeds above 31
  mph (50   km/h), close the 
windows and leave the air vents open.
Consider using equipment that can help keep 
the temperature in the passenger compartment 
down (sunroof blind and window blinds, etc.).
Unless automatically regulated, switch off the air 
conditioning as soon as the desired temperature 
has been reached.
Switch off the demisting and defrosting functions, 
if they are not managed automatically.
Switch off the heated seat as soon as possible.
Switch off the headlamps and foglamps when 
the visibility conditions do not require their use.
Avoid running the engine before moving off, 
particularly in winter; your vehicle will warm up 
much faster while driving.
As a passenger, avoid connecting your 
multimedia devices (film, music, video game, 
etc.) to help reduce consumption of electrical 
energy, and hence fuel.
Disconnect all portable devices before leaving 
the vehicle.
Limit the causes of excess consumption
Spread loads throughout the vehicle; place the 
heaviest items in the boot, as close as possible 
to the rear seats.
Limit the loads carried in the vehicle and 
minimise wind resistance (roof bars, roof rack,  bicycle carrier, trailer, etc.). Preferably, use a 
roof box.
Remove roof bars and roof racks after use.
At the end of winter, remove snow tyres and refit 
summer tyres.
Comply with servicing instructions
Check tyre pressures regularly, with the tyres 
cold, referring to the label in the door aperture on 
the driver's side.
Carry out this check in particular:
–
 
before a long journey
 .
–
 
at each change of season.
–
 
after a long period out of use.
Do not overlook the spare wheel and, where 
applicable, the tyres on your trailer or caravan.
Have your vehicle serviced regularly (engine oil, 
oil filter
, air filter, passenger compartment filter, 
etc.) and observe the schedule of operations in 
the manufacturer's service schedule.
With a BlueHDi Diesel engine, if the SCR system 
is faulty, your vehicle will emit pollution. Visit 
a PEUGEOT dealer or a qualified workshop 
as soon as possible to restore your vehicle’s 
nitrogen oxide emissions to regulatory 
compliance.
When filling the fuel tank, do not continue after 
the third nozzle cut-out, to avoid overflow.
You will only see the fuel consumption of your 
new vehicle settle down to a consistent average 
after the first 1,900 miles (3,000 kilometres).   

8
Eco-driving
Eco mode
This mode optimises the heating and 
air conditioning functions to reduce fuel 
consumption.
Activation/Deactivation 
 
 
 
► To activate or deactivate this mode, press this 
button.
The indicator lamp is illuminated when the 
system is activated.
Eco-coaching
This function provides you with advice and 
information to help you adopt a more economical 
and environmentally friendly driving style.
It takes into account multiple parameters, 
including braking optimisation, acceleration 
management, gear changes, tyre inflation and 
use of the heating/air conditioning systems.
Information displayed on the instrument 
panel
By selecting the "Eco-coaching" tab of 
the central display in the matrix  instrument panel, you can assess your driving in 
real time with the braking and acceleration 
indicator.
Information displayed on the touch screen
The four tabs - "Trip", "Air conditioning
", 
"Maintenance" and "Driving" - provide tips to 
help you optimise your driving style.
Information relating to the driving style may also 
be displayed in real time.
The "Report" tab assesses your driving style on 
a daily basis and gives an overall score for the 
week.
You can reset this report at any time by pressing 
"Reset ".
With PEUGEOT Connect Radio
► In the " Applications " menu, select 
"Eco-coaching".
With PEUGEOT Connect Nav
► In the " Applications " menu, then the 
"Vehicle Apps" tab, select 
"Eco-coaching".   

9
Instruments
1Instrument panel
Speedometer 
 
 
 
Analogue speedometer (mph or km/h).
Indicators with LCD text or 
matrix instrument panel
 
 
1. Fuel gauge.
2. Engine coolant temperature gauge.
Display screen 
 
When travelling abroad, you may need to 
change the units of distance: the road 
speed must be displayed in the country’s 
official unit (miles or km). The unit is changed 
via the screen configuration menu, with the 
vehicle stationary.
With LCD symbols instrument panel 
 
With LCD text instrument panel 
    

10
Instruments
Rev counter 
 
 
 
Rev counter (x 1000 rpm).
Warning and indicator 
lamps
Displayed as symbols, the warning and indicator 
lamps inform the driver of the occurrence of a 
malfunction (warning lamps) or of the operating 
status of a system (operation or deactivation 
indicator lamps). Certain lamps light up in two 
ways (fixed or flashing) and/or in several colours.
Associated warnings
The illumination of a lamp may be accompanied 
by an audible signal and/or a message displayed 
in a screen.
Relating the type of alert to the operating status 
of the vehicle allows you to determine whether 
the situation is normal or whether a fault has 
With matrix instrument panel 
 
1. Cruise control or speed limiter settings.
2. Gear shift indicator.
Gear with an automatic gearbox.
3. Digital speedometer (mph or km/h) with LCD 
symbols and LCD text instrument panel.
Display area with matrix instrument panel: 
alert or function status message, trip 
computer, digital speedometer (mph or km/h), 
etc.
4. Service indicator, then total distance recorder 
(miles or km) and trip distance recorder 
(miles or km).
Display area with LCD text instrument 
panel: alert or function status message, trip 
computer, etc.
5. Engine coolant temperature gauge.
6. Engine oil level indicator.
7. Fuel gauge.
Control buttons 
 
With LCD symbols instrument panel
A.Lighting dimmer.
After a long press on SET: change the set 
time values and the units.
B. Reminder of servicing information or the 
driving range with the SCR system and the 
AdBlue
®.
Reset the function selected (service indicator 
or trip distance recorder).
After a long press: change the set time values 
and the units.
With LCD text instrument panel
With matrix instrument panel
A. Temporary reminder of servicing information, 
or reminder of the driving range with the SCR 
system and the AdBlue
®.
Depending on version: go back up a level or 
cancel the current operation.
B. Lighting dimmer.
Depending on version: browse a menu or list, 
or change a value.
C. Reset the trip distance recorder (long press).
Reset the service indicator.
Depending on version: enter the configuration 
menu and confirm a choice (short press).   

11
Instruments
1Rev counter 
 
 
 
Rev counter (x 1000 rpm).
Warning and indicator 
lamps
Displayed as symbols, the warning and indicator 
lamps inform the driver of the occurrence of a 
malfunction (warning lamps) or of the operating 
status of a system (operation or deactivation 
indicator lamps). Certain lamps light up in two 
ways (fixed or flashing) and/or in several colours.
Associated warnings
The illumination of a lamp may be accompanied 
by an audible signal and/or a message displayed 
in a screen.
Relating the type of alert to the operating status 
of the vehicle allows you to determine whether 
the situation is normal or whether a fault has  occurred: refer to the description of each lamp 
for further information.
When the ignition is switched on
Certain red or orange warning lamps come on 
for a few seconds when the ignition is switched 
on. These warning lamps should go off as soon 
as the engine is started.
For more information on a system or a function, 
refer to the corresponding section.
Warning lamp continuously 
lit
The illumination of a red or orange warning lamp 
indicates the occurrence of a fault that needs 
further investigation.
If a warning lamp remains lit
The references (1), (2) and (3) in the warning 
and indicator lamp description indicate whether 
you should contact a qualified professional in 
addition to the immediate recommended actions.
(1): You must stop the vehicle
.
Stop as soon as it is safe to do so and switch off 
the ignition.
(2): Contact a PEUGEOT dealer or a qualified 
workshop.
(3): Visit a PEUGEOT dealer or a qualified 
workshop.
List of warning and 
indicator lamps
Red warning/indicator lamps
STOP
Fixed, associated with another warning 
lamp, accompanied by the display of a 
message and an audible signal.
A serious fault with the engine, braking system, 
power steering, automatic gearbox or a major 
electrical fault has been detected.
Carry out (1) and then (2).
Engine oil pressureFixed.
There is a fault with the engine lubrication 
system.
Carry out (1) and then (2).
BrakesFixed.
The brake fluid level has dropped 
significantly.
Carry out (1), then top up with brake fluid 
that complies with the manufacturer's 
recommendations. If the problem persists, carry 
out (2).
Fixed.
The electronic brake force 
distribution
 
(EBFD) system is faulty.
Carry out (1) and then (2).   

13
Instruments
1If manual application and release commands are 
not working, the electric parking brake control 
lever is faulty.
The automatic functions must be used at all 
times and are automatically re-enabled in the 
event of a control lever fault.
Carry out (2).
Low fuel level
/2 
1 1Fixed (warning lamp or LED) and 
needle in the red zone (depending 
on version), accompanied by an audible signal 
and a message.
The audible signal and the message are 
repeated with increasing frequency as the fuel 
level drops towards zero.
When it first comes on there remains less than 6 
litres of fuel in the tank.
Refuel without delay to avoid running out of fuel.
Never drive until completely empty, this could 
damage the emission control and injection 
systems.
Presence of water in diesel filter
Fixed (with LCD symbols instrument 
panel).
The diesel filter contains water.
Risk of damage to the injection system
  : carry 
out (2) without delay.
Engine self-diagnosis systemFlashing.
The engine management system has a 
fault. There is a risk that the catalytic converter will be 
destroyed.
Carry out (2) without fail
.
Fixed.
The emission control system has a fault.
The warning lamp should go off when the engine 
is started.
Carry out (3) quickly.
Fixed.
A minor engine fault has been 
detected.
Carry out (3).
Fixed.
A major engine fault has been 
detected.
Carry out (1) and then (2).
Diesel engine pre-heatingFixed.
The period of illumination depends on the 
climatic conditions.
The ignition is on.
Wait until the warning lamp goes off before 
starting.
If the engine does not start, switch the ignition off 
and then on, wait until the indicator lamp goes off 
again, then start the engine.
Under-inflationFixed, accompanied by an audible signal 
and a message.
The pressure in one or more wheels is too low.
Check the pressure of the tyres as soon as 
possible. Reinitialise the detection system after adjusting 
the pressure.
Under-inflation warning lamp 
flashing then fixed and Service 
warning lamp fixed.
The tyre pressure monitoring system is faulty.
Under-inflation detection is no longer monitored.
Check the tyre pressures as soon as possible 
and carry out (3).
Anti-lock braking system (ABS)Fixed.
The anti-lock braking system has a fault.
The vehicle retains conventional braking.
Drive carefully at moderate speed, then carry 
out (3).
Distance Alert / Active Safety BrakeFixed, accompanied by the display of a 
message.
The system has been deactivated via the vehicle 
configuration menu.
Flashing.
The system is operating.
The vehicle brakes briefly so as to reduce the 
speed of collision with the vehicle ahead.
Fixed, accompanied by a message and 
an audible signal.
The system has a fault.
Carry out (3).
Fixed.
The system has a fault.
If these warning lamps come on after the engine 
is switched off and then restarted, carry out (3).   

15
Instruments
1AdBlue® warning lamp flashing and 
Service warning lamp fixed, 
accompanied by an audible signal and a 
message indicating the driving range.
The driving range is less than 375 miles 
(600
 
km).
You must top up the AdBlue
® to avoid a 
breakdown, or carry out (3).
AdBlue® warning lamp flashing and 
Service warning lamp fixed, 
accompanied by an audible signal and a 
message indicating that starting is prevented.
The AdBlue
® tank is empty: the regulatory engine 
immobiliser prevents the engine from being 
restarted.
To restart the engine, top up the AdBlue
®, or 
carry out
 
(2).
You must add at least 5 litres of
 
AdBlue® to its 
tank.
AdBlue® (with 1.5 BlueHDi Euro 6.2/ 6.3)On for around 30 seconds when starting 
the vehicle, accompanied by a message 
indicating the driving range.
The driving range is between 1,500 and 500 
miles (2,400 and 800
  km).
Top up the AdBlue
®.Fixed, on switching on the ignition, 
accompanied by an audible signal and a 
message indicating the driving range.
The driving range is between 500 and 62 miles 
(800 and 100
  km).
Promptly top up the AdBlue
®, or carry out (3).Flashing, accompanied by an audible  signal and a message indicating the driving 
range.
The driving range is less than 62 miles (100
  km).
You must top up the AdBlue
® to avoid engine 
starting being prevented , or carry out
  (3).
Flashing, accompanied by an audible 
signal and a message indicating that 
starting is prevented.
The AdBlue
® tank is empty: the legally required 
engine immobiliser system prevents the engine 
from starting.
To restart the engine, top up the AdBlue
® or carry 
out (2).
It is  essential to add at least 5 litres of AdBlue
® 
to the tank.
SCR emissions control system (BlueHDi)Fixed when the ignition is 
switched on, accompanied 
by an audible signal and a message.
A malfunction involving the SCR emissions 
control system has been detected.
This alert disappears once the exhaust 
emissions return to normal levels.
Flashing AdBlue® warning 
lamp on switching on the 
ignition, with the Service and Engine self-
diagnostics warning lamps on fixed, 
accompanied by an audible signal and a 
message indicating the driving range.
Depending on the message displayed, it may be 
possible to drive for up to 685
 
miles (1,100   km) 
before the engine immobiliser is triggered. Carry out (3) without delay, to 
avoid starting 
being prevented.
Flashing AdBlue® warning 
lamp on switching on the 
ignition, with the Service and Engine self-
diagnostics warning lamps on fixed, 
accompanied by an audible signal and a 
message indicating that starting is prevented.
The engine immobiliser prevents the engine 
from restarting (over the authorised driving limit 
after confirmation of an emissions control system 
malfunction).
To start the engine, carry out (2).
ServiceTemporarily on, accompanied by the  display of a message.
One or more minor faults have been detected for 
which there is no specific warning lamp.
Identify the cause of the fault using the message 
displayed in the instrument panel.
You can deal with certain anomalies yourself, for 
example an open door or the start of saturation 
of the particle filter.
For any other problems, such as a fault with the 
tyre under-inflation detection system, carry out 
(3).
Fixed, accompanied by the display of a 
message.
One or more major faults for which there is no 
specific warning lamp have been detected.
Identify the cause of the anomaly using the 
message displayed in the instrument panel, then 
carry out (3).