2021 NISSAN X-TRAIL display


> (GLW    0RGHO 7$@
*
2
Setting thetarget parking position and
starting theoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVH1015X
1. Slowly movethevehicle forward andstop
approximately 1m (3 ft)beside theparking space.
Adjust thetarget parking rectangle (blue)position
by touching
.
NO TE:
.
Use theturn signal switch toselect a
preferred sideforparking.
.
The target parking rectangle needstobe
positioned neartheactual parking space
before fineadjustments canbemade by
touching
. The instructions forvehicle
movement duringtheadjustment areas
follows.
Ð Check theposition ofthe lines and
rectangles withtheactual parking space
on the screen whilethevehicle isnot in
motion.
Ð Move thevehicle atalow speed while
checking thesurroundings forsafety with
your owneyes. Ð
Stop thevehicle againtomake sure
that thevehicle position isin the right
place.
.
Make surethatanyobjects arelocated
outside theclearance guidelines (red).
Otherwise, thevehicle mayhitthe objects
during themaneuvers. Refertothe fol-
lowing examples.
Example ofperpendicular
parking:
JVH0719X
*
1
: Good example
*
2
: Bad example
2. Touch theªStartº keyonthe screen.
The PA operation canbestarted whenthe
following conditions aremet.
.
The vehicle iscompletely stopped.
.
The steering wheelisin the straight position.
.
The shift lever isin the positions forforward
movement, suchasªDº (Drive) position (CVT
model) orª1º (1st) position (MTmodel) .
*
3
Moving thevehicle forward:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVH1019X
. Gently placehands onthe steering wheel(the
steering wheelwillbeoperated automatically) and
slowly movethevehicle forward tothe reverse
starting position rectangle (green)bymoderating
the amount ofpressure youapply tothe brake.
. Stop thevehicle completely whenthevehicle
reaches thereverse starting position rectangle
(green) .
. Depress thebrake pedal andstop thevehicle
completely whenitapproaches anothervehicleor
object, orwhen thevehicle reaches thereverse
starting position.
NO TE:
A warning chimewillsound whenthevehicle
speed exceeds thespeed limitforthe PA
operation.
Display screen,heaterandairconditioner ,and audio system
4-21
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-22
Display screen,heaterandaircondition er,and audio system
*
4
Moving thevehicle backward:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVH1020X
. Place theshift lever inthe ªRº (Reverse) position.
. Gently placehands onthe steering wheel(the
steering wheelwillbeoperated automatically) and
slowly movethevehicle inreverse intotheparking
space bymoderating theamount ofpressure you
apply tothe brake.
*
5
Finishing theparking operation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When thevehicle ispositioned inthe parking space,
depress onthe brake andstop thevehicle. Touch the
ªCancelº keytoterminate thePA system.
NO TE:
. Make anynecessary adjustments manually
and make turnsinreverse asrequired.
Depending onthe situation, shiftlever
operations mayberequired severaltimes
for maneuvering thevehicle intotheparking
space.
. Ifthe vehicle reaches theapproximate area
of the target parking space,achime will
sound. Amessage indicating thatthePA
operation isending willappear onthe
display andthesystem willterminate auto-
matically. Adjusting
thetarget parking position:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVH1025X
When setting atarget parking position, youcan make a
fine adjustment ofthe target parking rectangle (blue)
position.
1. Touch
on the screen.
At parking lotswith parking linesonthe ground,
the PA system willsearch forthe lines andmake
fine adjustments automatically .
2. Touch thearrow onthe screen forfine adjust-
ments ofthe target parking rectangle (blue)
position.
Fine adjustments mayberequired atparking lots
without parking linesorwhen theautomatic fine
adjustments usingtheparking linesdonot work.
Make surethatanyobjects arelocated outsidethe
clearance guidelines (red).
Operating tips:
. When thetarget parking rectangle (blue)doesnot
fit inthe actual parking spacefollowing thecorrect
procedure, checkthesurroundings andadjust the
location ofyour vehicle.
. Up toapproximately 70cm (27 in)offine
adjustments canbemade. Deactivation
ofPA:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The PA will deactivate underthefollowing conditions.
. When thesteering wheelisoperated manually.
. When theshift lever isplaced inthe ªPº (Park)
position (CVTmodel) .
. When 5seconds havepassed sincetheshift lever
was placed andkept inthe ªNº (Neutral) position.
. When reverse operations areconducted more
than 10times forsteering corrections.
. When thesystem judgesthattheconditions (such
as worn outorlow pressure tires,roadconditions,
etc.) arenot suitable forcorrect coursepredic-
tions.
. When thevehicle backsuptoaposition behind
the place fromwhich PA operation started.
. When thevehicle passes thereverse starting
position byover 2m (7 ft).
. When thevehicle speedexceeds approximately 7
km/h (4MPH) .
. When theparking operation bythe driver deviates
from thePA guidance tosome extent.
Safety notes
GUID-6D4 0BBA6-4FA2-4E40-BEAB-A406F1 C43A17
WARNING:
. Donot drive looking onlyatthe screen. It
could cause unexpected accidentsorcause
the vehicle tocontact surrounding objects.
. When assistance fromthePA is no longer
necessary, turnoffthe PA by touching the
Cancel keyonthe screen. Ifthe PA remains
on, the steering wheelmayoperate auto-
matically andmay cause unexpected acci-
dents.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
. Make surethatthere isenough spacefor
parking maneuvers beforestarting touse
the PA .
. Keep inmind thatthefront ofthe vehicle
may swing outtowards oncoming traffic
while thePA functions.
CAUTION:
Do not use thePA under thefollowing condi-
tions.
. Onunpaved roads.
. Onslippery roadssuchassnow-covered or
frozen roads.
. Onuneven roadswithslants, bumps, curb-
stones, wheeltracks, etc.
. Oncurved roads.
. Atmechanical parkingfacilities.
. Where parking orstopping isprohibited.
. When tirechains oraspare tireareinstalled.
. When thevehicle isbeing towed.
. When thedoors (including theback door)
are not closed.
. When transporting aload thatprotrudes
from yourvehicle.
. When thevehicle isladen withheavy loads.
NO TE:
. Under theconditions listedbelow, theremay
be instances inwhich surrounding objectsor
vehicles cutinto thevehicle pathway, or
when thevehicle cannotbeparked inthe
correct spotfollowing thePA operation, etc. Ð
When theshift lever isoperated while
driving.
Ð When sudden start,sudden stopor
sudden operation ofthe shift lever oc-
curs.
Ð When thetire pressure istoo low orthe
tire isworn out.
Ð When tiresareinstalled thatareofa
different sizefrom theones thatwere
equipped atthe time offactory shipment.
. When usingtheparallel parking mode,itis
not always possible forthe system tofind an
appropriate parkingspaceandmay indicate
parking spacesthatarenot suitable for
parking. Following areexample conditions
for which thesystem maynotfind aparking
space correctly.
Ð Parking spaceswithobjects located
above theheight rangeofparking sen-
sors (sonars) (i.e.,overhanging loads,tail
sections orloading rampsofgoods
vehicles) .
Ð Parking spacesthatarepartially occu-
pied bytrailer drawbars.
Ð Parking spacesthatarelittered orover-
grown.
Ð Parking spaceswhereacurb exists
(causing damageofthe wheels andtires) .
Ð Parking spacesthatareblocked by
foliage, grass,paving, blocks,etc.
Ð Parking spacesbordered byan obstacle
(i.e., atree, apost oratrailer) .
Ð Parking spaceswithobjects thatabsorb
ultrasonic wavessuchasfabric andsnow. Ð
During snowfall orheavy rain.
Ð Near objects thatemits ultrasonic waves
such ashorns ofother vehicle, noisefrom
a motorcycle engineandlarge automo-
bile airbrake, orsensors ofsurrounding
vehicles.
Ð When theconditions surrounding the
parking spacechange (i.e.,another vehi-
cle enters thetarget parking spaceafter
you pass it).
Operating tips:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The parking sensor(sonar) willautomatically turn
on when thePA is activated. WhenthePA
operation ends,thestatus ofthe parking sensor
(sonar) willreturn tothe mode thatitwas inbefore
the PA was activated.
. Depending onthe situation, theshift lever opera-
tions mayberequired severaltimes.
Malfunction:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
A warning message willbedisplayed andthesystem
will terminate operation whenamalfunction isdetected
in the PA .
When thewarning message isdisplayed duringthePA
operation, parkthevehicle inasafe place andrestart
the engine.
If the warning message isshown onthe display
repeatedly orifthe PA cannot beoperated after
restarting theengine, thismay indicate asystem
malfunction. Itshould nothinder normal driving, but
the vehicle shouldbeinspected byaNISSAN dealer.
Display screen,heaterandairconditioner ,and audio system
4-23
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-24
Display screen,heaterandaircondition er,and audio system
Maintenance
GUID-1BAC6 224-3866-47EB-B1C3 -361B4F698 45E
Refer toªAround viewmonitorº (P.4-10) formain-
tenance ofthe camera lens.
Blockages likedirt, ice,and objects suchasstickers
and accessories installedwithinthedetection rangeof
the parking sensor(sonar) maycause incorrect
function ofthe PA .Clean thesensors regularly with
care, anddonot scratch ordamage
them.
JVH0916X
Parking sensors (sonar)arelocated onthe bumpers: 6
on the front bumper and4on the rear bumper.
HOW TO ADJUST THESCREEN
GUID-81 8DAAB9-9049 -4E59-8622-4E833C2CFC8C
Adjusting screen(formodels withnavigation
system)
GUID-62022A5 F-F9E8-4734-9FFC-33 55CDF49BCA
Operation withtouch screen:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push theSETUP button.
2. Select theªSystemº key.
3. Select theªCamera DisplaySettingsº key.
4. Select theitem youwish toadjust.
. Display Mode:
Adjusts tofitthe level oflighting inthe vehicle.
T ouch theªDisplay Modeºkeytocycle through
options ofthe mode (Day,Night andAuto) .
. Brightness:
Adjusts thebrightness ofthe display .
. Contrast :
Adjusts thelevel ofcontrast.
. Color:
Adjusts thelevel ofthe color.
Operation withbuttons:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
JVH0649X
T o adjust thescreen brightness whentheAround View
Monitor isdisplayed, pushthedisplay control/display on´off
ª
º button
*
1
.
Adjust brightness tothe preferred settingusingthe
ENTER/Scroll dial
*
2
.
Adjust screen (formodels without navigation
system)
GUID-24EA 2981-374F-43 F8-AF7E-16E6099FDB6 A
JVH0660X
T o set upthe Around ViewMonitor toyour preferred
settings, pushtheENTER/SETTING button
*
1
while
the Around ViewMonitor screenisdisplayed. Each
time theENTER/SETTING button
*
1
is pushed, the
next setting itemisselected. Turn theTUNE´FOLDER
dial
*
2
to adjust eachitem.
Available settingitems:
. Brightness
. Contrast
The setting itemswilldisappear andthedisplay will
return tothe original screenifENTER/SETTING button
*
1
is pushed whenthelast setting itemisselected or
if the screen isnot operated forsome time.
Choosing alanguage:
The warning message onthe camera screenflashes
when theDISP button
*
3
is pushed andheld formore
than 6seconds. Thelanguage ofthe warning message
changes whentheDISP button
*
3
is pushed again
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
while thewarning message isflashing. Whenmore
than 6seconds haveelapsed withnooperation, the
warning message stopsflashing anddisplays normally
and thelanguage isset.
OPERA TINGTIPS
T32A1308 27-74B1BD5 5-6CEF-452C-A2A4-20D 06056FFF0
CAUTION:
. Donot use alcohol, benzine orthinner to
clean thecamera. Thiswillcause discolora-
tion. To clean thecamera, wipewithacloth
dampened withadiluted mildcleaning
agent andthen wipe withadry cloth.
. Donot damage thecamera asthe monitor
screen maybeadversely affected.
. Thescreen displayed onthe Around ViewMonitor
will automatically returntothe previous screen
when nooperation takesplace for3minutes after
the CAMERA button(models withnavigation
system)/DISP button(models withoutnavigation
system) hasbeen pushed whiletheshift lever isin
a position otherthantheªRº (Reverse) position.
. The display ofimages onthe screen maybe
delayed afterscreens areswitched. Objectsinthe
Around ViewMonitor maybedistorted momenta-
rily until theAround ViewMonitor screenis
displayed completely .
. When thetemperature isextremely highorlow ,
the screen maynotdisplay objects clearly.This is
not amalfunction.
. When strong lightdirectly shinesonthe camera,
objects maynotbedisplayed clearly.This isnot a
malfunction.
. Thescreen mayflicker underfluorescent light.This
is not amalfunction. .
Thecolors ofobjects onthe Around ViewMonitor
may differ somewhat fromthose ofthe actual
object.
. Objects onthe monitor maynotbeclear andthe
color ofthe object maydiffer inadark location or
at night. Thisisnot amalfunction.
. There maybedifferences inclearness between
each camera viewofthe bird's eyeview .
. Ifdirt, rainorsnow attaches tothe camera, the
Around ViewMonitor maynotdisplay objects
clearly .Clean thecamera.
. Donot use wax onthe camera window.Wipe off
any wax with aclean cloththathasbeen
dampened withamild detergent dilutedwith
water.
T32A130 827-CAFE11 11-7E6C-4CD4 -B64D-9F203FE0B12 4
CENTER VENTILATORS
T32A130827- F33E5627-FD00-423C-B EEF-FD1BF D45C3B8
JVH0662X
Open/close thevents bymoving thecontrol toeither
direction.
: Thissymbol indicates thatthevents are
open. Moving thecontrol tothis direction
will open the
vents.
: Thissymbol indicates thatthevents are
closed. Moving thecontrol tothis direction
will close thevents.
Adjust theairflow direction ofthe ventilators bymoving
the center knob(up/down, left/right)untilthedesired
position isachieved.
Display screen,heaterandairconditioner ,and audio system
4-25
VENTILA
TORS
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-26
Display screen,heaterandaircondition er,and audio system
SIDE VENTILA TORS
T32A1308 27-14E8E99 F-99CC-412 8-B741-5C6C32DD484 6
JVH0663X
Open/close thevents bymoving thecontrol toeither
direction.
: Thissymbol indicates thatthevents are
open. Moving thecontrol tothis direction
will open thevents.
: Thissymbol indicates thatthevents are
closed. Moving thecontrol tothis direction
will close thevents.
Adjust theairflow direction ofthe ventilators bymoving
the center knob(up/down, left/right)untilthedesired
position isachieved.
REAR VENTILA TORS (ifequipped)
T32A1308 27-09DDAF C4-C01B-4AF0-8E56- 8D67AECF ADB2
JVH0879X
Open/close thevents bymoving thecontrol toeither
direction.
: Thissymbol indicates thatthevents are
open. Moving theside control tothis
direction willopen thevents.
: Thissymbol indicates thatthevents are
closed. Moving theside control tothis
direction willclose thevents.
Adjust theairflow direction ofthe ventilators bymoving
the center knob(up/down, left/right)untilthedesired
position isachieved.
T32A130 827-B6B49E 34-3817-4359-BDE6-6C 6EB1F60D3D
WARNING:
. The heater andairconditioner operateonly
when theengine isrunning.
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in the vehicle. Petsshould notbeleft alone
either. Theycould unknowingly activate
switches orcontrols andinadvertently be-
come involved inaserious accident and
injure themselves. Onhot, sunny days,
temperatures inaclosed vehicle could
quickly become highenough tocause se-
vere orpossibly fatalinjuries topeople or
animals.
. Donot use therecirculation modeforlong
periods asitmay cause theinterior airto
become staleandthewindows tofog up.
. Donot adjust theheating andaircondition-
ing controls whiledriving sothat fullatten-
tion may begiven tovehicle operation.
The heater andairconditioner operatewhenthe
engine isrunning. Theairblower willoperate evenif
the engine isturned offand theignition switchis
placed inthe ªONº position.
NO TE:
. Odors frominside andoutside thevehicle
can build upinthe airconditioner unit.Odor
can enter thepassenger compartment
through thevents.
. When parking, setthe heater andaircondi-
tioner controls toturn offairrecirculation to
allow freshairinto thepassenger compart-
ment. Thisshould helpreduce odorsinside
the vehicle.
HEA TER AND AIRCONDIT IONER
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
For models withStop/Start SystemorIdling
Stop System:
While theengine isstopped bythe Stop/Start System
or the Idling StopSystem, switching theairflow tothe
front defogger willcause theengine toautomatically
restart.
While theengine isrunning, selecting airflowtothe
front defogger willprevent theStop/Start Systemor
Idling StopSystem fromautomatically stoppingthe
engine.
When theengine isstopped bythe Stop/Start System
or Idling StopSystem, heaterandairconditioner
performance maybereduced. To keep fullheater and
air conditioner performance, restarttheengine by
pushing theStop/Start SystemOFFswitch orthe
Idling StopSystem OFFswitch, orby placing the
ignition switchinthe ªONº position. Formore details
see ªStop/Start SystemorIdling StopSystemº (P.5-
18) .
OPERA TINGTIPS(forautomatic aircondi-
tioner)
T32A1308 27-94E48E 8C-CACC-4 A8C-8478-31C 17097E10D
JVH0727X
JVH0728X
When theengine coolant temperature andoutside air
temperature arelow,the airflow from thefoot outlets
may notoperate. However, thisisnot amalfunction.
After thecoolant temperature warmsup,the airflow
from thefoot outlets willoperate normally.
The sensors
*
1
and
*
2
, located onthe instrument
panel, helpmaintain aconstant temperature. Donot
put anything onoraround thesensors.
Display screen,heaterandairconditioner ,and audio system
4-27
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
4-28
Display screen,heaterandaircondition er,and audio system
MANUAL AIRCONDITIONER ANDHEATER (Type A)
T32A1308 27-FC419F2 9-59C8-4324-B0B6-C96 1B2FBC0DF
JVH0664X
1. ªA/Cº button/Fan speedcontrol ª
º dial
2. Airflow control buttons
3. ªMAX A/Cºbutton/T emperature controldial
4. Front defogger
ª
º button
5. Rear defogger
ª
º button (SeeªDefogger
switchº (P.2-49) .)
6. Airrecirculation
ª
º button
For models withStop/Start SystemorIdling Stop
System:
The Stop/Start SystemorIdling StopSystem willnot
activate whenthefront defogger isturned on.
Controls
T32A130 827-429D5 75F-97C2-4 BE3-AA18-DE7034F213 4F
T urning system on/off:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o turn onthe system, turnthefanspeed control
ª
º dial outofthe OFF position. Turn thedial
counterclockwise tothe OFF position toturn offthe
system. Fan
speed control:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T urn thefanspeed control ª
º dial clockwise to
increase thefanspeed.
T urn thefanspeed control ª
º dial counterclock -
wise todecrease thefanspeed.
T emperature control:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T urn thetemperature controldialtoset the desired
temperature. Turn thedial between themiddle andthe
right position toselect thehot temperature. Turn the
dial between themiddle andtheleftposition toselect
the cool temperature. Air
flow control:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push oneofthe airflow control buttons toselect theair
flow outlets.
Ð Airflows mainly fromcenter andside
ventilators.
Ð Airflows mainly fromcenter andside
ventilators andfoot
outlets.
Ð Airflows mainly fromthefoot outlet and
partly fromthe
defogger.
Ð Airflows mainly fromthedefogger andfoot
outlets.
Outside aircirculation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theairrecirculation ª
º button. (Theindicator
light willturn off.)Theairflow isdrawn fromoutside the
vehicle.
Select theoutside aircirculation modefornormal
heating orair conditioning operation.
Air recirculation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theairrecirculation ª
º button on.(The
indicator lightwillilluminate.)
The airwill recirculate insidethevehicle.
A/C (AirConditioner) operation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theªA/Cº button toturn onoroff the air
conditioner. Whentheairconditioner ison, the ªA/Cº
indicator lightonthe button illuminates.
MAX A/C(Quick AirConditioning) operation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theªMAX A/Cºbutton forquick cooling and
dehumidifying.
When theMAX A/Cmode isturned on,the airflow
mode indicator willturn offwith theairflow mode fixed
at ª
º .
At the same time,theindicator lightonthe ªA/Cº
button andtheairrecirculation modewillturn on.
&RQGLWLRQ
([FHSWIRU&KLQD