2021 MERCEDES-BENZ V-CLASS ECO mode

R
hot vehicle parts do not come into
contact with 0ammable materials.
R theex haust gas can 0ow out of the
stationa ryheater exhaust pipe unhin-
dered.
R theex haust gas does not come into
contact with 0ammable materials. The heater
forth e auxiliary heating is /t tedatthe
front of theve hicle underbod y.The emissions out-
let is on the leT side of theve hicle below the front
door. &
W
WARNING
ARNING Risk of poisoning during work
on the auxiliary warm-air hea ter
If wo rkon the heat exch anger of the auxiliary
wa rm-air hea ter is not per form ed cor rectl y,
ex haust fumes could leak into the passenger
compartment. #
Have all workon the auxiliary warm-air
hea ter car ried out at a quali/ed specialist
wo rkshop. If
yo u are transporting hazardous materials, com-
ply with there leva nt sa fety regulations. Place
objects a su1cient distance from the auxiliary
heating outlet opening.
* N
NO OTE
TE Damage tothe auxiliary heating due
to ove rheating If
th e 0ow of hot air is bloc ked, the auxiliary
heating may overheat and switch o.. #
Do not block the 0ow of hot air. *
N
NOOTE
TE Battery dischar gecaused bystation-
ary heater or stationa ryventilation ope ra-
tion Operating
the stationary heater or stationary
ve ntilation drains the batter y. #
ATer heating or ventilating theve hicle
twice, drive for a longer period of time. Yo
ur vehicle may be equipped with either a hot-
wa ter auxiliary heater or an auxiliary warm-air
hea ter.
The ho hot-w
t-w at
ater auxiliar
er auxiliar y heat
y heat er
eris adjusted and
ope rated using the& rock er switch on the cli-
mate control system operating unit and via the
multimedia system or byremo tecont rol. The auxiliar
auxiliar y w
y war
arm-air heat
m-air heat er
eris adjusted and oper-
ated via the switch clock on the lo wer centre con-
sole. Ho
Ho
t-w
t-w at
ater auxiliar
er auxiliar y heat
y heat er
er F
F
unction of t
unction of t he ho
he hot-w
t-wat
ater auxiliar
er auxiliar y heat
y heater
er
Obser vethe no tes on auxiliary heating
(/ page 129).
The hot-water auxiliary heater has a heater boos-
te r,stationary heater and stationary ventilation
function.
The stationary hea ter automatically adapts its
operating mode tochanges in outside temp erature
and weather conditions. It is therefore possible
th at the stationary heater may switch from ventila-
tion toheating mode or from heating toventilation
mode.
The stationary hea ter will automatically switch
itself o. aTer a maximum of 50 minutes. The
heater booster function helps toheat up theve hi-
cle while the engine is running and at low outside
te mp eratures.
Yo u can set up tothre e departure times for pre-
entry climate control byremo tecont rol or via the
multimedia system. The switch-on time is then cal-
culated based on the outside temp erature and the
activated departure time. This means that your
ve hicle is preheated or precooled bythe set depar-
ture time.
If th e departure time is reached and theve hicle is
not star ted, the auxiliary heating will continue to
ru nfo r appr oximately /ve more minutes. It will
th en switch o. automaticall y.
When the auxiliary heating is heating and theve hi-
cle is star ted, the heater booster function of the
auxiliary heating will be activated.
When the auxiliary heating is ventilating and the
ve hicle is star ted, the auxiliary heating will be auto-
matically switched o.. 130 130
Climate control

R
R
ectifying pr
ectifying pr oblems wit
oblems with t
h the ho
he ho t-w
t-wat
ater auxiliary
er auxiliary
heat
heat er
er
F
F AIL
AIL ¨
¨appear
appear s on t
s on the r
he remot
emot e contr
e contr ol display
ol display
Po ssible cause:
R Signal transmission between transmit ter and
re ceiver is malfunctioning. #
Change your position in relation totheve hicle,
moving closer if necessar y.
F
F AIL appear
AIL appear s on t
s on the r
he remot
emot e contr
e contr ol display
ol display
Po ssible cause:
R The star ter battery is not su1ciently charge d. #
Char gethe star ter batter y.
Po ssible cause:
R The fuel tank is not /lled up tothere ser ve
le ve l. #
Refuel at the nearest /lling station.
F
F AIL appear
AIL appear s on t
s on the r
he remot
emot e contr
e contr ol displa
ol displa y
y¯
¯
Po ssible cause:
R The auxiliary heating has malfunctioned. #
Have the auxiliary heating checked at a quali-
/ed specialist workshop. A
A
uxiliar
uxiliar y w
y war
arm-air heat
m-air heat er
er F
F
unction of t
unction of t he auxiliar
he auxiliary w
y w ar
arm-air heat
m-air heat er
er
Obser vethe no tes on auxiliary heating
(/ page 129).
The air-in take opening forth e auxiliary warm-air
hea ter is located on the inner side of the leT front
seat base. The warm-air outlet is on there ar side
of the leT front seat.
The auxiliary warm-air hea ter supplements the cli-
mate control system of your vehicle and has an
auxiliary heating function.
The stationary heater will switch o. automatically
when theve hicle is switched o. or when the set
heating duration has elapsed.
The immediate heating mode of the auxiliary heat-
ing supports the climate control system when the
engine is running and the outside temp erature is
lo w.
The switch clo ckforth e auxiliary warm-air hea ter
is located in the lo wer centre console.
Yo u can use the switch clock toset up tothree
departure times for pre-entry climate control. Switc
Switc h cloc h cloc kov
k over ervie
vie w (auxiliar
w (auxiliar y w
y war
arm-air heat
m-air heat er)
er) 1
Select option / change values
2 Menu bar
3 Select option
4 Pressing brie0y :con/rms a selection or set-
ting
Pressing and holding: switches immediate
heating mode on/o.
5 Status bar
6 Pressing brie0y: switches switch clock on /
cancels or term inates the settings in a menu
Pressing and holding: term inates all functions
Switc
Switc hing t hing t he switc
he switc h cloc
h clock on (auxiliar
k on (auxiliar y w
y war
arm-air
m-air
heat
heat er)
er) #
Press button 6.
% The switch clock will switch tostandby mode
aTer ten seconds. The display will go o..
Se
Se tting t
tting t he switc
he switc h cloc
h clock (auxiliar
k (auxiliar y w
y war
arm-air heat
m-air heat er)
er)
Se
Se tting t
tting t he time
he time
Yo u must reset the da y,time and default value for
th e operating duration in thefo llowing cases:
R initial operation
R aTer a voltage supply inter ruption (e.g.if the
battery has been disconnected)
R aTer a malfunction #
Press button 1or3 until 4 0ashes on
menu bar 2. #
Press button 4. #
Press button 1or3 until Î0ashes. #
Press button 4. #
Use button 1or3 toset the hours. Climate control
133
133

Displaying
the ECO start/s top function in the
inst rument cluster:
R è: The ECO start/s top function opera-
tional.
R ç: Not all on vehicle conditions for an auto-
matic engine stop are met.
% Depending on the engine, theè symbol
/rst appears during the automatic engine stop
or during the journe y.
If all vehicle conditions forth e automatic engine
stop are met, the engine is automatically switched
o.:
R V
Vehicles wit
ehicles wit h manual tr
h manual tr ansmission:
ansmission: You decel-
erate theve hicle toa lo wer speed, then engage
neutral iand then take your foot o. the
clutch pedal.
R V
Vehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: You stop
th eve hicle in transmission position hori.
The engine restarts au tomatically in thefo llowing
cases:
R V Vehicles wit
ehicles wit h manual tr
h manual tr ansmission:
ansmission: Yo u
depress the clutch pedal.
R V
Vehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: Yo u
re lease the brake pedal in transmission posi-
tion hand with the HOLD function deactiva-
te d.
R V Vehicles wit ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: Yo u
select transmission position hork.
R You depress the accelerator pedal.
R The vehicle requ ires an automatic engine start.
If th e engine was switched o. bythe ECO start/
stop function and one of the doors is opened, the
engine will automatically start.
Switc
Switc hing t hing t he EC
he EC O st
O star
art/st
t/st op function
op function o./on
o./on #
Press theè button on the centre console.
When the indicator lamp in theè button
lights up, the ECO start/s top function is acti-
va ted. F
F
unction of t
unction of t he EC
he ECO display
O display The ECO display summarises
your driving charac-
te ristics from the start of the journey toits com-
pletion and assists you in achieving the most eco-
nomical driving style. If you inter rupt yo ur journey
and switch o. theve hicle for longer than four
hours, the ECO display values will automatically be
re set. Yo
u can in0uence consum ption if you:
R Anticipate road and tra1c conditions.
R Drive in drive prog ram ; if it is available;
ot herwise, in drive prog ram A
(/ page 144).
R Follow thege arshiT recommendations. The inner segment lights up
green and the outer
segment /lls up:
R 1Moderate acceleration
R 2Gentle deceleration and rolling
R 3Consistent speed
The inner segment is grey and the outer segment
em pties:
R 1Sporty acceleration
R 2Heavy braking
R 3Speed 0uctuations
Yo u are driving economically if the edge of the
ECO display lights up and theth re e outer seg-
ments are comple tely full at the same time.
The additional range achie ved as a result of your
driving style in comparison with a driver with a very
sporty driving st yle is shown under Bonus from
start. The range displa yed does not indicate a /xed
re duction in consum ption. A
A
ctiv
ctiv ating EC
ating EC O display
O display On-board computer
4 ò 5
Trip #
Select ECO display .
The inst rument cluster display will show the
ECO displa y. 140
140
Driving and parking

R
Ifth e typical outline of a pedestrian cannot be
distinguished from the backg round.
R If a pedestrian is not de tected as such, e.g.
due tospecial clo thing or other objects.
R In bends with a nar row radius. A
A
ctiv
ctiv ating or deactiv
ating or deactiv ating A
ating Activ
ctive Br
e Br ak
ake Assist
e Assist On-board computer:
4 ò 5
Settings 5
Assistance
5 Active Brake Assist
% It isrecommended that Active Brake Assist is
alw ays leT activated. #
T
To activ
o activ at
ate/deactiv
e/deactiv at
ate:
e: press thea button.
The distance warning function and the autono-
mous braking function of Active Brake Assist
are deactivated or acti vated.
When the functions are deactivated, theæ
symbol appears in the assistance graphic in
th e inst rument cluster displa y.
The next time theve hicle is star ted, Ac tive Brake
Assist is automatically acti vated. F
F unction of A
unction of A dap
daptiv
tive Br
e Br ak
ake Lights
e Lights Ad
aptive brake lights warnfollowing tra1c in an
emer gency braking situation with thefo llowing sig-
nals:
R By 0ashing the brake lamps
R By activating the hazard warning lights
If th eve hicle is braked sharply from speeds abo ve
50 km/h, the brake lamps 0ash rapidl y.This pro-
vides tra1c tr avelling behind you with an even
more noticeable warning.
If th eve hicle is tr avelling at speeds of more than
70 km/h at the beginning of the brake application,
th e hazard warning lights switch on once theve hi-
cle is stationar y.When pulling away again, the haz-
ard warning lights switch o. automatically at
appr oximately 10 km/h.
Yo u can also switch o. the hazard warning lights
using the hazard warning button (/ page 108). Cr
Cr uise contr
uise contr ol and limit
ol and limit er
er F
F
unction of cr
unction of cr uise contr
uise control
ol
Cruise control accelerates and brakes theve hicle
automatically in order tomaintain a pr eviously
stored speed. If
yo u accelerate toove rtake, forex ample, the
stored speed is not dele ted. If youre mo veyour
fo ot from the accelerator pedal aTer overtaking,
cruise cont rol will resume speed regulation back to
th e stored speed.
Yo u operate cruise control using the cruise control
le ve r.Yo u can store any speed abo ve30 km/h.
Obser vethe no tes on driving systems and your
re sponsibility; you may otherwise failto recognise
dangers (/ page 152).
Syst
Syst em limits
em limits
Cruise cont rol may be unable tomaintain the
stored speed on uphill gradients. The stored speed
is resumed if the uphill gradient evens out and the
ve hicle's speed does not fall below 30 km/h.
On long and steep downhill gradients, you should
ch ange down toa lo werge ar in good time. Take
particular no teof this when driving a laden vehicle.
By doing so, you will make use of the engine's
braking e.ect. This will take some of the strain o.
th e brake system and pr event the brakes from
ov erheating and wearing tooqu ickl y.
If yo uch ange wheel size on your vehicle, check it
is assigned tothe cor rect wheel size category
(/ page 260). If the category is changed without
re coding the control units in theve hicle, the func-
tioning of cruise control may be impaired.
Do not use cruise control in thefo llowing situa-
tions:
R in tra1c situations where frequent speed
changes are requi red, e.g. in heavy tra1c or on
winding roads
R o.-road or on construction sites
R on slippery or slick roads, as the drive wheels
can lose traction when accelerating and the
ve hicle can then skid
R ifth ere is poor visibility
F
F unction of t unction of t he limit
he limiter
er
The limiter restricts the speed of theve hicle. To
adjust tothe set speed quickl y,the limiter applies
th e brakes automaticall y.
Yo u can limit the speed as follo ws:
R Variable: for a short-term or medium-term
re striction of the highest permissible speed,
e.g. in built-up areas
R Perm anent: for a long-term restriction of the
highest permissible speed, e.g. in winter tyre
mode Driving and parking
157 157

Yo
u can operate theva riable limi ter with the cruise
control le ver.Yo u can store any speed abo ve
30 km/h. You can also per form settings while the
ve hicle is stationary if theve hicle has been star-
te d.
Obser vethe no tes on driving systems and your
re sponsibility. You may otherwise failto recognise
dangers (/ page 152).
If yo uch ange wheel size on your vehicle, check it
is assigned tothe cor rect wheel size category
(/ page 260). If the category is changed without
re coding the control units in theve hicle, the func-
tioning of the limiter may be impaired.
Kic
Kic kdo
kdo wn
wn
If yo u depress the accelerator pedal be yond the
pressure point (kickdown), the limiter switches to
passive mode.
The instrument cluster display sho ws theLimiter
passive message and you are able toexceed the
stored speed.
ATer completion of kickdown, theva riable limi ter
is activated again in thefo llowing situations:
R Ifth e driven speed drops below the stored
speed.
R Ifth e stored speed is called up.
R Ifyo u store a new speed.
Oper
Oper ating cr ating cr uise contr
uise contr ol or t
ol or the v
he var
ariable limit
iable limit er
er
R
R eq
eq uir
uir ements:
ements:
Cruise control
R Cruise control is selected.
R The parking brake has been released.
R ESP ®
is activated, but may not inter vene.
R The driving speed is at least 30 km/h.
R The clutch pedal is not dep ressed.
R The brake pedal is not depressed.
R
R eq
eq uir
uir ements:
ements:
Va riable limi ter
R The vehicle has been star ted.
R The variable limi ter is selected. Switc
Switc
hing be
hing be tw
tween cr
een cr uise contr
uise contr ol and t
ol and the v
he var
ariable
iable
limit
limit er
er #
Press button 5.
R LIM indicator lamp 2o.: cruise control is
selected.
R LIM indicator lamp 2lit:theva riable lim-
iter is selected.
S
S t
tor
or ing and maint
ing and maint aining t
aining the curr
he current speed
ent speed #
Brie0y press the cruise control le ver up 1or
down 4.
The cur rent speed is stored and theve hicle
maintains this speed (cruise control) or does
not exceed it (variable limiter).
When you activate cruise control, the stored speed
is brie0y shown in thete xt /eld of the inst rument
cluster displa y.The display also sh owsth e¯
symbol and the stored speed.
When you activate theva riable limi ter,th e inst ru-
ment cluster display brie0y sho ws the stored
speed. The display also sho ws theÈ symbol
and the stored speed.
% Forve hicles with Active Distance Assist
DISTRONIC, the segments between the start
of the scale and the stored speed light up in
th e speedome ter dial instead.
Calling up t
Calling up t he st
he stor
ored speed
ed speed &
W
WARNING
ARNING Risk of accident due tostored
speed
If yo u call up the stored speed and this is lo wer
th an your cur rent speed, theve hicle deceler-
ates. #
Take into account the tra1c situation
before calling up the stored speed. 158
158
Driving and parking

#
Brie0y pull the cruise control le ver in direction
3.
The last stored speed is called up and theve hi-
cle maintains this speed (cruise control) or
does not exceed it (variable limiter).
If th e last stored speed has pr eviously been
dele ted, the cur rently driven speed is stored.
% When you switch o. theve hicle, the last speed
stored is cleared.
Incr Incr easing or r
easing or r educing t
educing the speed
he speed #
Press the cruise control le ver up 1or down
4 asfar as the 1st pressure point.
The stored speed is increased or reduced by
1 km/h.
or #
Press the cruise control le ver up 1or down
4 beyond the 1st pressure point.
The stored speed is increased or reduced by
10 km/h.
If yo u ha veset Miles asthe unit forth e digital
speedome ter,yo u can maintain any speed from
20 mph (cruise cont rol) or set it as the limit speed
(variable limiter). You can then set the limit speed
in increments of 1 mph and 5 mph.
Deactiv
Deactiv ating cr
ating cr uise contr
uise contr ol or t
ol or the v
he var
ariable limit
iable limit er
er #
Brie0y press the cruise control le verfo rw ards
6.
or #
Press button 5.
The ¯ orÈ symbol and the stored
speed in the inst rument cluster display then go
out.
% Cruise control is deactivated in thefo llowing
situations:
R you apply the brakes.
R you drive below a speed of 30 km/h.
R you shiT the transmission toposition i.
R ESP ®
inter venes.
In these cases theva riable limi terre mains
activated.
If yo u deactivate ESP ®
, or ABS or ESP ®
is mal-
functioning, cruise control and the limiter are
deactivated.
% V Vehicles wit
ehicles wit h manual tr
h manual tr ansmission:
ansmission: ifthe
engine speed is very low, cruise cont rol or the
limiter is deactivated. When the transmission
is in neutral or the clutch pedal is depressed
fo r longer than six seconds, cruise cont rol is
deactivated. If cruise control automatically deactivates, a
warn-
ing tone sounds and theCruise control off mes-
sage appears brie0y in the inst rument cluster dis-
pla y.
Inf
Inf or
ormation on t
mation on t he per
he permanent limit
manent limit er
er
% The permanent limi ter is only available in cer-
ta in countries.
If th eve hicle should ne verex ceed a speci/c speed
(e.g. for driving in winter tyre mode), you can set
th is speed with the permanent limiter.
Yo u can permanently limit the speed toava lue
between 160 km/h and the maximum permissible
speed (/ page 159).
If yo u accelerate theve hicle using the accelerator
pedal, a message with the stored speed is shown
in the inst rument cluster display shortly before the
set limit speed is reached.
The permanent limi terre mains active even if the
va riable limi ter is deactivated. The permanent lim-
iter does not switch topassive mode even during
kickdown and the driven speed remains below the
set speed.
Se Se tting t
tting t he limit speed f
he limit speed f or wint
or winter tyr
er tyres
es
On-board computer:
4 ò 5
Settings 5
Vehicle
5 Limit speed (winter tyres) #
Change the setting and con/ rmusing thea
button.
By selecting Offyou switch o. the permanent
limiter. DSR (Do DSR (Do
wnhill Speed R
wnhill Speed R egulation)
egulation) N
No
ot
tes on DSR
es on DSR
DSR supports you when driving downhill. DSR
maintains a set speed foryo u on downhill gradi-
ents byapplying the brakes as requi red. Maintain-
ing the speed is dependent on thero ad sur face
conditions and the downhill gradient and cann ot
th erefore be guaranteed in all situations.
Obser vethe no tes on driving systems and your
re sponsibility; you may otherwise failto recognise
dangers (/ page 152).
Yo u can set the speed tobetween 4 km/h and
18 km/h using the brake and accelerator pedals
or the cruise control le ver.
DSR automatically controls in thefo llowing situa-
tions:
R Ifth eve hicle is stationar y,or its speed is less
th an 4 km/h , the speed is set to4 km/h or it Driving and parking
159
159

#
Use the: or9 button toscroll thro ugh
th e names.
If yo u press and hold the button for longer than
one second, the names in thete lephone book
will be displa yedqu ickly one aTer theot her.
or #
Press and hold the: or9 button for
longer than /ve seconds.
Ra pid scrolling – the name that starts with the
next letter or the pr evious letter in the alphabet
is displa yed.
Ra pid scrolling will stop when youre lease the
button or reach the end of the list. #
If onl
If onl y one t
y one t elephone number has been sav
elephone number has been sav ed
ed
f
f or a name:
or a name: pressthe6 ora button to
start dialling.
or #
If sev
If sev er
er al t
al t elephone number
elephone number s hav
s have been sav
e been sav ed
ed
f
f or a name:
or a name: pressthe6 ora button to
display thete lephone numbers. #
Use the: or9 button toselect the
te lephone number. #
Press the6 ora button tostart dial-
ling. #
T
To e
o e xit t
xit t he t
he t elephone book:
elephone book: pressthe~ or
% button.
Using r Using r edial edial #
Press the6 button toswitch tothere dial
memor y. #
Use the: or9 button toselect the
name or telephone number. #
Press the6 ora button tostart dial-
ling. #
T
To e
o e xit t
xit t he r
he r edial memo ry
edial memory :
:press the~ or
% button. Se
Se
ttings menu
ttings menu #
Press theò button tocall up the list of
menus. #
Use the: or9 button toselect the
Settings menu. #
Press thea button tocon/rm.
Yo u ha vethefo llowing options on theSettings
menu:
R Changing the settings forth e driver assistance
systems on the Assistance submenu
R Changing the settings forth eex terior lighting
on the Lights submenu R
Changing the display options on the Instrument
cluster submenu
R Setting the permanent limiter on theVe hicle
submenu
R Resetting the settings tofactory settings #
Select the desired submenu and con/ rmyour
selection.
Assist
Assist ance submenu
ance submenu #
Select a driving or driver assistance system
and con/gure a setting.
R Switching ESP ®
on/o. (/ page 154).
R Switching Tra1c Sign Assist on/o.
(/ page 174).
R Switching Active Brake Assist on/o.
(/ page 157).
R Switching Blind Spot Assist on/o.
(/ page 175)
R Adjusting ATTENTION ASSIST
(/ page 173).
R Setting Lane Keeping Assist
(/ page 176).
Lights submenu Lights submenu
The following settings are possible on the Lights
submenu:
R Switching the Intelligent Light System on/o.
(/ page 110)
R Switching between low beam forright- and leT-
sid etra1c (in vehicles with Intelli gent Light
System only) #
Use the: or9 button toselect the
Lights submenu. #
Press thea button tocon/rm. #
T To switc o switc h be
h betw
tw een lo
een lo w beam f
w beam f or r
or right- and
ight- and leT-
leT-
side
side tr
tra1c:
a1c: usethe: or9 button to
select Dipped beams Setting for.
The display will show the selected setting. #
Change the selected setting with thea but-
to n.
When youch ange the setting, the switcho ver
will not take place until the next time theve hi-
cle is stationar y.
When you switch overth e low beam forright- or
leT-sid etra1c, mo torw ay mode and the enhanced
fo g light function may not be available. This deacti-
va tion will take place only if the setting for driving
on theright or leT is the opposite toyour vehicle's
national version. Instrument cluster and on-board computer
189
189

Connecting a mobile phone
Connecting a mobile phone
R R
eq
eq uir
uir ements:
ements:
R Blue tooth ®
is activated on the mobile phone
(see the manufacturer's operating inst ruc-
tions).
R Bluetoo th®
is activated on the multimedia sys-
te m.
Multimedia system: 4 © 5
Phone
Searc
Searc hing f
hing for a mobile phone
or a mobile phone #
Select í. #
Select Connect new device.
Connecting a mobile phone
Connecting a mobile phone
Au thorisation follo ws using secure simple pairing. #
Select a mobile phone.
A code is displa yed in the multimedia system
and on the mobile phone. #
If bo thcodes match, con/rm the code on the
mobile phone.
F
F unctions in t unctions in t he T
he Telephon
elephon y menu
y menu
The functions available in theTe lephony menu
include thefo llowing:
R Making calls, e.g.:
- R Accepting a call
- k End call
- i Create conferen. call
- Accepting or rejecting a waiting call
R Managing contacts, e.g.:
- Downloading mobile phone contacts
- Editing thefo rm at of a contact's name
- Saving contacts in theve hicle
R Receiving and sending messages, e.g.:
- Using there ad-aloud function
- Dictating a new message Ov
Ov
er
ervie
vie w of Smar
w of Smar tphone Int
tphone Int egr
egration
ation
Wi th Sma rtphone Integ ration, you can use cer tain
functions on your mobile phone via the multimedia
system displa y.
Only one mobile phone at a time can be connected
via Smartphone Integ ration tothe multimedia sys-
te m. Also for use with two phone mode with smart-
phone integ ration, only one additional mobile phone can be connec
ted using Blue tooth ®
with the
multimedia system.
The full range of functions for Smartphone Integ ra-
tion is only possible with an Internet connection.
The app ropriate application must be downloaded
on the mobile phone touse Smartphone Integ ra-
tion. The mobile phone must be switched on and
connec tedto a USB port with theç symbol on
th e multimedia system using a suitable cable.
Apps for Smartphone Integ ration
R Apple CarPlay ®
R Android Auto
Yo u can start Apple CarPlay ®
or Android Auto
using theApps menu.
Alternative: If an application is active via Smart-
phone Integ ration (e.g. when music is being pla yed
or route guidance is active), you can call up the
active application using the| orz or%
application buttons
Yo u can end Smartphone Integ ration bydiscon-
necting the connecting cable between the mobile
phone and multimedia system.
% Mercedes-Benz recommends disconnecting
th e connecting cable only when theve hicle is
stationar y.
When using Android Auto or Apple CarPlay ®
, cer-
ta in vehicle data is transfer redto the mobile
phone. This enables youto get the best out of
selected mobile phone services. Vehicle data is
not directly accessible.
The following system information is transmitted:
R SoTware release of the multimedia system
R System ID (anonymised)
The transfer of this data is used tooptimise com-
munication between theve hicle and the mobile
phone.
To do this, and toassign se veralve hicles tothe
mobile phone, a vehicle ID is random lyge nerated.
This has no connection totheve hicle identi/cation
number (VIN) and is dele ted when the multimedia
system is reset (/ page 202).
The following vehicle status data is transmit ted:
R The transmission position engaged
R The distinction between par ked, standstill, roll-
ing and driving
R The day/night mode of the inst rument cluster MBUX multimedia system
209 209