2021 MERCEDES-BENZ S-CLASS SALOON LONG light

Ad
aptive Highbeam Assist Plus automatically
switches between thefo llowing types of light:
R Low beam
R Partial high beam
R High beam
R ULTRA RANGE Highbeam (only vehicles with
DIGITAL LIGHT) ULTRA RA
NGE Highbeam increases the bright-
ness of the cone of light tothe legally permitted
maximum.
Pa rtial high beam does not include other road
users in the high beam area. It does not dazzle
th em but enables full high beam illumination for
th e driver apart from theex cluded vehicles.
At speeds below 25 km/h or when there is su1-
cient street lighting:
R The partial high beam and the high beam will
be switched o. automaticall y.
At speeds greater than 30 km/h:
R If no other road users are de tected, the high
beam will switch on automaticall y.
R Ifot her road users are de tected, the partial
high beam will switch on automaticall y.
At speeds abo ve40 km/h:
R If no other road users are de tected on a
st ra ight road, ULTRA RA NGE Highbeam will be
switched on automaticall y.
R Ifot her road users are de tected, the partial
high beam will switch on automaticall y.R
If high ly re0ective signs are de tected, ULTRA
RANGE Highbeam will be switched o. auto-
maticall y.
% The system's optical sensor is located behind
the windscreen near theove rhead control
panel.
Switc Switc hing A
hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist Plus t Pluson/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
If Ad aptive Highbeam Assist Plus is activated,
th e _ indicator lamp will light up on the
driver displa y.When partial high beam or high
beam is active, the cor responding blue indica-
to r lamp will also light up.
Switc Switc hing
hingo.
o. #
Switch o. the high beam using the combina-
tion switch. Light and sight
177
177

Se
Se
tting lo
tting lo w beam
w beam Multimedia system:
4 © 5
Settings 5
Lights
5 MULTIBEAM LED 5
Low beam #
Select Right-side traffic, Left-side trafficor
Automatic.
% Invehicles with DIGITAL LIGHT headlamps,
th e Intelligent Light System can be adjusted
on theDIGITAL LIGHT menu.Se
Se
tting t
tting t he e
he ext
xter
er ior lighting
ior lighting switc
switch-o.
h-o. dela
delay time
y time R
R
eq
eq uir
uir ements:
ements:
R The light switch is in theà position.
Multimedia system: 4 © 5
Settings 5
Lights
5 Interior/exterior lighting
5 Exterior lighting delayed switch off #
Set the swit ch-o. delay time.
When theve hicle's engine is switched o., the
ex terior lighting will be activated forth e set
time. A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating t
ating the locat
he locat or lighting
or lighting R
R
eq
eq uir
uir ements:
ements:
R The light switch is in theà position.
Multimedia system: 4 © 5
Settings 5
Lights
5 Interior/exterior lighting #
Activate or deactivate Locator lighting.
When the function is activated, theex terior light-
ing will light up for 40 seconds aTer theve hicle is
unloc ked. When you start theve hicle, the locator
lighting is switched o. and automatic driving
lights are activated. Int Int
er
erior lighting
ior lighting A
A
djus
djus ting t
ting t he int
he int er
erior lighting
ior lighting 1
c
Switches the front interior lighting
on/o.
2 u
Switches there ar interior lighting on/o.
3 |
Switches automatic interior lighting con-
trol on/o. #
T To switc
o switc h r
h reading lam
eading lam ps
pson/o.:
on/o.: holdyour
hand under there spective reading lamp 4or
5. 178
178
Light and sight

Oper
Oper
ating unit inside t
ating unit inside t hegr
he grab handle (r
ab handle (r ear)
ear) 1
p
Reading lamp on there specti veside of
th eve hicle
2 u
Rear interior lighting #
T
To switc
o switc h r
h reading lam
eading lam ps on:
ps on:press but ton1.
The reading lamp, the interior lighting in the
gr ab handle and the dome lamp on the
re specti veside of theve hicle will light up. #
T
To switc
o switc h r
h reading lam
eading lam ps
pso.:
o.: press but ton1
once or twice.
ATer pressing it once, the interior lighting in
th egr ab handle and the dome lamp on the
re specti veside of theve hicle will go out. ATer pressing it twice,
there ading lamp on
th ere specti veside of theve hicle will go out. #
T To switc
o switc h t
h the r
he r ear int
ear int er
erior lighting
ior lighting on/o.:
on/o.:
press but ton2.
The reading lamps, the interior lighting in the
gr ab handle and the dome lamps on bo th
sides of theve hicle will light up or go out. A
A
djus
djusting t ting t he ambient lighting
he ambient lighting Multimedia system:
4 © 5
Settings 5
Comfort
5 Ambient lighting
Se
Se tting t
tting t he colour
he colour #
Select Colour. #
Select Monochrome orMulti-colour. #
Set the desired colour or colour scheme.
A
A djus
djus ting t
ting t he br
he br ightness
ightness #
Select Brightness. #
Adjust the brightness. %
Depending on the ambient light conditions,
th e ambient lighting will automatically switch
between day and night modes.
A
A ctiv
ctiv ating t
ating t he br
he brightness f
ightness f or zones
or zones #
Select Brightness. #
Switch o. Link zones .
The Direct, Indirect andAccents zones can be
set separatel y.
% The Light strip zone can also be set in vehi-
cles with active ambient lighting.
A
A ctiv
ctiv ating
ating e.ects
e.ects &
W
WARNING
ARNING Risk of an accident despite
activated e.ects of ambient lighting and
active ambient lighting
To use theWa rning Assistance e.ects, the
re specti vefunctions must be activated in the
driver assist menu. #
Make sure that the functions and assists
are switched on. Light and sight
179 179

%
Obser vethe no tes on driving systems and
yo ur responsibility; you may otherwise failto
re cognise dangers (/ page 266).#
Select Effects . #
Activate the desired e.ect.
% Depending on theve hicle equipment, di.erent
e.ects are available.
Operating feedback e.ects
R Climate: If changes are made tothete mp era-
ture setting in theve hicle, the colour of the
ambient lighting will change brie0y.
R Voice assistant: Forve hicles with active ambi-
ent lighting, thevo ice assistant is visually ani-
mated.
Wa rning assistance e.ects
R Warning when exiting: If an object is de tected
in the blind spot while you are getting out of
th eve hicle, the ambient lighting in the a.ec-
ted door will 0ash red.
Fu rther information on theex itwa rning
(/ page 298). R
Active Lane Keeping Assist: If there is a warn-
ing from Active Lane Keeping Assist, the
active ambient lighting will 0ash red.
Fu rther information on Active Lane Keeping
Assist (/ page 302).
R Active Brake Assist : Ifthere is an Active Brake
Assist warning, the active ambient lighting in
th e centre of the cockpit will 0ash bright red.
Fu rther information on theAc tive Brake Assist
(/ page 290).
R Active Blind Spot Assist: In vehicles with
active ambient lighting, the ambient lighting
on the a.ected side will 0ash red if there is a
wa rning from Active Blind Spot Assist.
Fu rther information on theAc tive Blind Spot
Assist (/ page 298).
Greeting R When youget into theve hicle, a special colour
animation will pla y.
Multi-colour animat.
R The chosen colour combination will change at
prede/ned inter vals. %
Invehicles with active ambient lighting, an
animation will be pla yed.
% The desired operating feedback and warning
assistance can be activated or deactivated via
th e´ symbol. Depending on the equip-
ment, di.erent operating feedback and warn-
ing assistance e.ects are available.
% Ifth e brightness is set toa low le vel,wa rning
animations will be displa yed at a higher basic
brightness. Switc Switc
hing t
hing t he int
he inter
erior lighting
ior lighting switc
switch-o.
h-o. delay
delay
time
time on/o.
on/o. Multimedia system:
4 © 5
Settings 5
Lights
5 Interior/exterior lighting
5 Interior lighting delayed switch off #
Switch Interior lighting delayed switch off on
or o..
When this function is active, the interior light-
ing will light up for a short time aTer theve hi-
cle is loc ked. 180 180
Light and sight

W
W
indscr
indscr een wiper
een wiper s and windscr
s and windscr een w
een washer sy
asher sy s-
s-
t
t em
em Switc
Switc
hing t
hing t he windscr
he windscr een wiper
een wipers
son/o.
on/o. 1
gWindsc reen wipers o.
2 Ä Automatic wiping, normal
3 Å Automatic wiping, frequent 4
° Continuous wiping, slow
5 ¯ Continuous wiping, fast #
Turn the combination switch tothe cor re-
sponding position 1-5. #
Single wipe/w
Single wipe/w ashing:
ashing:pushthe button on the
combination switch in the direction of ar row
1 .
R í Single wipe
R î Wiping with washer 0uid
% Obser vethe no tes on washing theve hicle in a
car wash (/ page 429).
V
V ehicles wit
ehicles wit h MA
h MAGIC VISION C
GIC VISION C ONTR
ONTROL:
OL:in posi-
tion 2or3 ,th e windscreen washing process
is automatically triggered if dirt is de tected on the
windscreen unless theTop up washer fluid mes-
sage is being displa yed.
Deep-cleaning t
Deep-cleaning t he windscr
he windscreen
een
In the case of heavy soiling, you can deep-clean
th e windscreen abo veoutside temp eratures of
5°C. #
In a stationary vehicle, turn the combination
switch toposition 1,2or3. #
Press the button on the combination switch in
th e direction of ar row 1 and hold it for
appr oximately two seconds.
The wiper arms will mo veinto their replace-
ment positions and washer 0uid will be distrib-
uted on the windscreen.
ATer appr oximately 30 seconds, the wiper
arms will mo veback again and wipe the wind-
screen se veral times. Deep-cleaning will now
ha ve /nished. R
R
eplacing t
eplacing t he windscr
he windscr een wiper blades
een wiper blades &
W
WARNING
ARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can be
trapped bythe wiper arm. #
Always switch o. the windscreen wipers
and vehicle before changing the wiper
blades. Light and sight
181 181

Mo
Mo
ving t
ving t he wiper ar
he wiper ar ms int
ms into t
o the r
he r eplacement posi-
eplacement posi-
tion
tion #
Switch theve hicle on and then o. again
immediatel y. #
Within around 15 seconds, press and hold the
î button on the combination switch for
appr oximately thre e seconds (/ page 181).
The wiper arms will mo veinto there placement
position.
R
R emo
emo ving t
ving t he wiper blades
he wiper blades #
Foldthe wiper arms away from the wind-
screen. #
Hold the wiper arm with one hand. With the
ot her hand, turn the wiper blade away from
th e wiper arm in the direction of ar row 1 as
fa r as it will go. #
Slide catch 2inthe direction of ar row 3
until it engages in there mo val position. #
Remo vethe wiper blade from the wiper arm in
th e direction of ar row 4. F
F
itting t
itting t he wiper blades
he wiper blades #
Insert the new wiper blade into the wiper arm
in the direction of ar row 1. #
Slide catch 2inthe direction of ar row 3
until it engages in the locking position. #
Make sure that the wiper blade is seated cor-
re ctl y. 182
182
Light and sight

#
Foldthe wiper arms back onto the wind-
screen. #
Switch on theve hicle. #
Press theî button on the combination
switch.
The wiper arms will return totheir original
positions. #
Switch o. theve hicle.
% Check the condition of the wiper blades regu-
lar lyand replace them in theev ent of visible
damage or ongoing smearing. Maint Maint
enance display
enance display #
Remo veprotective /lm 1from the mainte-
nance displa yson the tips of the ne wly/tted
wiper blades.
When the colour of the maintenance displa ys
ch anges from black toyello w, replace the wiper
blades. %
The duration until the colour changes varies
depending on the usage conditions. R
R
eplacing t
eplacing t he windscr
he windscr een wiper blades (MA
een wiper blades (MA GIC
GIC
VISION C
VISION C ONTR
ONTROL)
OL) Mo
Mo
ving t
ving t he wiper ar
he wiper ar ms int
ms into t
o the r
he r eplacement posi-
eplacement posi-
tion
tion #
Switch o. theve hicle. #
Within around 15 seconds, press theî
button on the combination switch
(/ page 181).
The wiper arms will mo veinto there placement
position. Light and sight
183
183

R
R
emo
emo ving t
ving t he wiper blades
he wiper blades #
T
To br
o br ing t
ing t he wiper blade int
he wiper blade int o position t
o position to be
o be
r
r emov
emov ed:
ed:hold the wiper arm /rmly with one
hand. With th eot her hand, turn the wiper
blade in the direction of ar row 1 beyond the
point of resis tance.
The wiper blade will engage in there mo val
position with a clic k. #
T
To r
o r emov
emov e t
e the wiper blade:
he wiper blade: pressrelease knob
2, pull the wiper blade in the direction of
ar ro w 3 and remo ve.
F
F itting t
itting t he wiper blades
he wiper blades #
Push the new wiper blade onto the wiper arm
in the direction of ar row 1 until release knob
2 engages. #
Press the wiper blade be yond the point of
re sis tance in the direction of ar row 3 onthe
wiper arm.
The wiper blade will engage with a noticeable
click and mo vefreely again. #
Foldthe wiper arm back onto the windscreen.
% Check the condition of the wiper blades regu-
lar lyand replace them in theev ent of visible
damage or ongoing smearing. Mirr Mirr
ors
ors Oper
Oper
ating t
ating t he outside mirr
he outside mirr ors
ors &
W
WARNING
ARNING Risk of accident due toadjust-
ing theve hicle settings while theve hicle is
in motion
Yo u could lose control of theve hicle in thefo l-
lowing situations in particular:
R ifyo u adjust the driver's seat, the head
re straint, the steering wheel or the mir ror
while theve hicle is in motion 184
184
Light and sight