#
Always st owand secure heavy, hard,
poin ted, sharp-edged, fragile or bulky
objects in the boot/load compartment. Obser
vethe no tes on loading theve hicle. &
W
WARNING
ARNING Risk of /re from placing objects
in the mobile phone st owage compart-
ment
Placing other objects in the mobile phone
st ow age compartment could constitute a /re
hazard. #
Apart from a mobile phone, do not place
any other objects in the mobile phone
st ow age compartment, especially those
made of me tal. *
N NOOTE
TE Damage toobjects caused byplac-
ing them in the mobile phone st owage
compartment If objects are placed in
the mobile phone
st ow age compartment, these may be dam-
aged byelectromagnetic /elds. #
Do not place credit cards, storage
media, ski passes or other objects sensi-
tive toelectromagnetic /elds in the
mobile phone st owage compartment. *
N NOOTE
TE Damage tothe mobile phone st ow-
age compartment caused byliquids If liquids enter
the mobile phone st owage
compartment, the compartment may be dam-
aged. #
Ensure that no liquids enter the mobile
phone st owage compartment. Alw
ays obser vethe no tesfo r persons with elec-
tronic medical aids (/ page 40).
R Depending on theve hicle equipment, the
mobile phone is connected totheve hicle's
ex terior aerial via thech arging module.
R The charging function and wireless connection
of the mobile phone totheve hicle's exterior
aerial are only available if theve hicle is
switched on. R
Small mobile phones may not be able tobe
ch arge d in everyposition of the mobile phone
st ow age compartment.
R Largemobile phones which do not rest 0at in
th e mobile phone st owage compartment may
not be able tobe charge d or connected with
th eve hicle's exterior aerial.
R The mobile phone may heat up during the
ch arging process. This may also depend on
th e applications (apps) cur rently open in the
background.
R Toensure more e1cient charging and connec-
tion with theve hicle's exterior aerial, remo ve
th e pr otective co ver from the mobile phone.
Pr otective co vers which are necessary for
wireless charging are an exception. W
W
ir
irelessl
elessl y c
y char
har ging a mobile phone in t
ging a mobile phone in t he fr
he front
ont R
R
eq
eq uir
uir ements:
ements:
R The mobile phone is suitable for wireless
ch arging. Seats and st
owing
165
165
A list of compatible mobile phones can be
fo
und at: https://www.mercedes-benz-
mobile.com/
Depending on theve hicle's equipment, theve hi-
cle has thefo llowing options for wirelessly charg-
ing a mobile phone in the cockpit:
R Inthe front st owage compartment
R Inthe st owage compartment of the cockpit
armrest Example: wirelessly
charging a mobile phone in the
front st owage compartment #
Place the mobile phone as close tothe centre
of mat 1as possible with the display facing
upwards.
W W ir
irelessl
elessl y c
y char
har ging a mobile phone in t
ging a mobile phone in t he fr
he front
ont
st ow
st ow ag
age com
e compar partment
tment: :when a message is shown
in the multimedia system, the mobile phone is
being charge d. In addition, malfunctions during
th e mobile phone's charging process are shown in
th e multimedia system displa y.
W
W ir
irelessl
elessl y c
y char
har ging a mobile phone in t
ging a mobile phone in t he centr
he centre
e
console belo
console belo w t
w the ar
he ar mr
mrest
est: :th e mobile phone is
ch arging when the indicator lamp is lit. In addi-
tion, malfunctions during the mobile phone's
ch arging process are shown bythe indicator lamp
0ashing thre e times.
% The mat can be remo vedfo r cleaning, e.g.
using clean, luk ewarmwater.
R
R adio eq
adio eq uipment appr ov
uipment appr oval number
al number s f
s for Br
or Br azil
azil
This device operates on a secondary basis, that is
to say it has no pr otection against harmful inter-
fe re nce, not even from the same type of stations,
and must not cause inter fere nce with systems
ope rating on a prima rybasis. This product is permitted in accordance with
the
procedure de/ned in Directive 242/2000 bythe
Brazilian telecommunications agency ANATEL and
meets the applicable tech nical requ irements.
Fu rther information is available on the ANATEL
we bsite. www.anatel.go v.br #
Further information on the declaration of con-
fo rm ity forve hicle components which receive
and/or transmit radio waves. W
W
ir
irelessl
elessl y c
y char
har ging a mobile phone in t
ging a mobile phone in t he r
he rear
ear
passeng
passeng er com
er compar
partment
tment R
R
eq
eq uir
uir ements:
ements:
R The mobile phone is suitable for wireless
ch arging.
A list of compatible mobile phones can be
fo und at: https://www.mercedes-benz-
mobile.com/ 166 166
Seats and st
owing
Example:
vehicles with individual rear seats #
Open the st owage compartment in there ar
cent reconsole. #
Place the mobile phone as close tothe centre
of mat 1as possible with the display facing
upwards.
When the indicator lamp at the front of the
mobile phone system lights up, the mobile
phone is being charge d. In addition, malfunc-
tions during the mobile phone's charging proc-
ess are shown bythe indicator lamp 0ashing
th re e times.
% The mat can be remo vedfo r cleaning, e.g.
using clean, luk ewarmwater. %
Obser vethe no tes on loading theve hicle
(/ page 148). F F
itting and r
itting and r emo
emoving t
ving t he
he0oor
0oor mats
mats &
W
WARNING
ARNING Risk of accident due toobjects
in the driver's foot we ll
Objects in the driver's foot we ll may impede
pedal tr avel or block a depressed pedal.
This jeopardises the operating and road saf ety
of theve hicle. #
Stow all objects in theve hicle securely
so that they cannot getinto the driver's
fo ot we ll. #
Always /t the 0oor mats securely and as
prescribed in order toensure that there
is alw ays su1cient room forth e pedals. #
Do not use loose 0oor mats and do not
place 0oor mats on top of one ano ther. F F
itting
itting 0oor
0oormats
mats #
Slide the cor responding seat backwards and
lay the 0oor mat in thefo ot we ll such that it
/ts. #
Press studs 1onto holde rs2 . #
Adjust the cor responding seat. Seats and st
owing
167
167
5
L Low beam/high beam
6 R Switches there ar fog light on/o.
When low beam is activated, theT indicator
lamp forth e standing lights will be deactivated
and replaced bytheL low- beam indicator
lamp. #
Always park your vehicle safely using su1cient
lighting, in accordance with there leva nt legal
stipulations.
* N
NOOTE
TE Battery dis charging byoperating the
standing lights Operating
the standing lights over a period of
hours puts a strain on the batter y. #
Where possible, switch on theright X
or leT Wparking light. Fo
rve hicles that are wider than 2 m or lon ger
th an 6 m,single-sided parking lighting is not per-
mitted in some countries. In this case, the stand-
ing lights are also switched on in the parking
lights position. If
th e battery is insu1ciently charge d, the stand-
ing lights or parking lights will be switched o.
automatically tofacilitate the next engine start.
The exterior lighting (e xcept standing and parking
lights) will switch o. automatically when the driv-
er's door is opened.
R Obser vethe no tes on sur round lighting
(/ page 178).
Switc Switc hing on accident scene lighting
hing on accident scene lighting #
Switch o. theve hicle. #
Switch on the hazard warning light
(/ page 172). #
Turn the light switch from theà position to
th eL position.
The low beam will be switched on despite the
ve hicle being switched o..
The accident scene lighting will be switched o. if:
R you switch o. the hazard warning lights.
R you turn the light switch back toà .
R the battery is insu1ciently charge d. A
A
ut
ut omatic dr
omatic dr iving lights function
iving lights function
When theve hicle is switched on, the standing
lights, low beam and daytime running lights are
switched on automatically depending on the light
conditions. &
W
WARNING
ARNING Risk of accident when the
dipped beam is switched o. in poor visi-
bility
When the light switch is set toà ,the
dipped beam may not be switched on auto-
matically if there is fog, snow or other causes
of poor visibility such as spr ay. #
In such cases, turn the light switch to
L . The automatic driving lights are only an aid.
Yo u
are responsible forve hicle lighting.
Switc Switc hing t
hing t he r
he rear f
ear f og lights on or
og lights on or o.
o.
R
R eq
eq uir
uir ements:
ements:
R The light switch is in theL orà posi-
tion. #
Press the R button. 170
170
Light and sight
Pr
Pr
e-entr
e-entr y climat
y climat e contr
e control f
ol for depar
or depar tur
ture time
e time Pr
Pr
e-entr
e-entr y climat
y climat e contr
e control f
ol for depar
or depar tur
ture time func-
e time func-
tion
tion &
W
WARNI NG
ARNI NGDanger tolife due toexposure
to extreme heat or cold in theve hicle
If people, particular lych ildren, are exposed to
ex treme temp eratures over an extended
period of time, there is a risk of serious injury
or danger tolife. #
Never lea vepersons, children in particu-
lar, unattended in theve hicle. &
W
WARNING
ARNING Risk of burns due torepeatedly
switching on the seat heating
Re peatedly switching on the seat heating can
cause the seat cushion and seat backrest pad-
ding tobecome very hot.
In particular, the health of persons with limited
te mp erature sensitivity or a limited ability to
re act tohigh temp eratures may be a.ected or
th ey may even su.er burn-like injuries. #
Do not repeatedly switch on the seat
heating. To
protect against overheating, the seat heating
may be temp orarily deactivated aTer it has been
switched on repeatedl y.
% This function is only available for plug-in
hy brids or vehicles with a 48-V on-board elec-
trical system.
The air inside theve hicle can be heated, ventila-
te d or cooled tothe set temp erature when the
ve hicle is par ked.
When theve hicle is connected topowe r supply
equipment, priority is given tocharging the 48 V
battery or the high-voltage battery toa speci/ed
minimum charge.
The running time of pre-entry climate control may
be reduced under thefo llowing conditions (vehi-
cles with a 48 V on-board electrical system):
R The vehicle is not connected topowe r supply
equipment.
R The 48 V battery is not fully charge d. The
running time of pre-entry climate control may
be reduced under thefo llowing conditions (plug-in
hy brid):
R The vehicle is not connected topowe r supply
equipment.
R The high-voltage battery is not fully charge d.
Wi th active pre-ent ryclimate cont rol,th ech arge
le ve l of the 48 V battery or the high-voltage bat-
te ry may be reduced, even if thech arging cable
connector is connected.
If present, seat ventilation is activated in cooling
and ventilation mode.
Depending on theve hicle's equipment, thefo llo w-
ing functions are activated in heating mode, if
av ailable:
R Seat heating
R Steering wheel heater
R Panel heating
R Mirror heater
R Rear wind owheater
R Windsc reen heater 198 198
Climate control
Characteristics with high po
wer output requ ests:
R The electric mo tors support the combustion
engine (boost e.ect), e.g. when pulling away
or accelerating.
R The high-voltage battery is discharging.
Characteristics when releasing the accelerator
pedal during the journe y:
R The electric mo tors are operated as a alterna-
to r when in overrun mode and during braking.
R The high-voltage battery is charging.
% In drive prog ram Î, theve hicle drives
purely elect ricall y,in drive prog rams C,
and B the combustion engine is alw ays on
No tes on elect ric mode:
R Vehicles with hybrid systems generate signi/-
cant lyless noise when stationary and when
being driven than vehicles with combustion
engines.
R When driving in elect ric mode theve hicle may
not be heard by otherroad users due tothe
signi/cantly reduced noise generated when
driving and when at a standstill. It is
forth is reason that theve hicle is equip-
ped with a sound generator, which ser ves as
an acoustic vehicle alerting system (A VAS).
R If not all of theve hicle conditions for electric
mode are met, then the combustion engine is
switched on.
No tes on the acoustic vehicle alerting system:
R The sound generator generates a stationary
noise and, up toa speed of about 60 km/h,
speed-dependent vehicle noise emissions.
R This helps other road users, particular ly
pedestrians and cyclists, tohear your vehicle
better.
R When driving at speeds abo ve20 km/h the
acoustic vehicle alerting system gradually
switches theve hicle noise emissions o.. Manual disconnection of t
Manual disconnection of t
he high-v
he high-volt
oltag
age on-
e on-
boar
boar d electr
d electr ical syst
ical syst em
em &
D
DAN
AN GER
GER Risk of death and /re due to
modi/ed and/or damaged components of
th e high-voltage on-board electrical sys-
tem
The vehicle's high- voltage on-board electrical
system is under high voltage. If you modify
component parts in theve hicle's high- voltage
on-board electrical system or touch damaged
component parts, you may be electrocuted. In
addition, modi/ed and/or damaged compo-
nents may cause a /re.
In theev ent of an accident or impact tothe
ve hicle underbod y,components of the high-
vo ltage electrical system may be damaged
although the damage is not visible. #
Never make any modi/cations tothe
high- voltage on-board electrical system. #
Do not switch on or use theve hicle if its
high- voltage on-board electrical system
components ha vebeen modi/ed or dam-
aged. Driving and parking
209 209
T
T
opping up A
opping up A dBlue
dBlue®
®
Mercedes-Benz recommends topping up AdBlue ®
at a /lling pump. If no AdBlue ®
/lling pump is
av ailable, you can also top up AdBlue ®
using a
canister. #
Screw onthefa stener of AdBlue ®
re/ll canis-
te r4. #
Screw disposable hose 3onto the opening
of Ad Blue ®
re/ll canis ter4 until hand-tight. #
Screw disposable hose 3onto the /ller neck
of theve hicle until hand-tight. #
LiT up and tip AdBlue ®
re/ll canis ter4.
The /lling process stops when theAd Blue ®
ta nk is comple tely full.
Ad Blue ®
re/ll canis ter4 can be remo ved
when it has been only partial lyem ptied. #
Unscr ewand close disposable hose 3and
Ad Blue ®
re/ll canis ter4 inreve rse order. #
Replace AdBlue ®
/ller cap 2and turn it
clo ckwise until it audibly engages. #
Close fuel /ller 0ap 1. #
Switch on theve hicle for at least 60 seconds.
% Ifth eve hicle could not be star ted as the
Ad Blue ®
tank was em pty, it can take up to
60 seconds forth ere /ll tobe de tected. #
Start theve hicle.
% Avoid storing AdBlue ®
re/ll con tainers perma-
nently in theve hicle. Char
Char
ging t
ging t he high-v
he high-v olt
oltag
age batt
e batt er
ery (plug-in
y (plug-in
h
h ybr
ybr id)
id) N
No
ot
tes on c
es on c har
harging t
ging t he high-v
he high-v olt
oltag
age batt
e batt ery
ery *
N
NOOTE
TE High-voltage battery damage due to
leaving theve hicle idle for lengt hyperiods
of time Lithium-ion batteries
experience a natural self-
dischar ge.
Exhausti vedischarging can therefore occur if
th eve hicle is idle for se veral months. This can
damage the high-voltage batter y. #
Toavo id damage, please obser vethefo l-
lowing recommendations when handling
th e high-voltage batter y. *
N
NO
OTE
TE Accelerated ageing of the high-volt-
age battery As a
result of its basic characteristics, the
storage capacity of and the amount of energy
av ailable from the high-voltage battery
decrease over the course of its life. Due to Driving and parking
241
241
th
is, bo th the maximum electrical range that
can be achie vedby theve hicle and its maxi-
mum elect rical output can be impaired.
The following factors could accelerate the age-
ing of the high-voltage batter y:
R a high le vel of charge , especially if the
ve hicle is idle for a lengt hyperiod of time
R frequent rapid charging with direct cur rent
(mode 4)
R leaving theve hicle idle for lengt hyperiods
at high ambient temp eratures #
Toavo id accelerated ageing, please
obser vethefo llowing recommendations
when handling the high-voltage batter y.Re
commendations when handling the high-voltage
batter y:
R Only charge the high-voltage battery with
direct cur rent (mode 4) if necessar y.
R If leaving theve hicle idle for lengt hyperiods,
park up theve hicle with a high- voltage battery
ch arge leve l between 25% and 30%. Do not ke
ep the high-voltage battery continuously
connected topowe r supply equipment.
R If leaving theve hicle idle for lengt hyperiods of
time avoid, if possible, high ambient temp era-
tures.
R Check the high-voltage battery's charge level
ev ery six weeks (/ page 258).
R Char gethe high-voltage battery if thech arge
le ve l is below 15%.
R Do not disconnect the 12 V battery even if the
ve hicle is leT idle for a lengt hyperiod. Other-
wise, the condition of theve hicle's high- volt-
age battery cannot be monitored.
Depending on the equipment and national ver-
sion, your vehicle is equipped with one of thefo l-
lowing vehicle soc kets:
R Type 1 forch arging with alternating cur rent
(mode 2/3)
R Type Combo 1 forch arging with alternating
cur rent (mode 2/3) and charging with direct
cur rent (mode 4)
R Type 2 forch arging with alternating cur rent
(mode 2/3) R
Type Combo 2 forch arging with alternating
cur rent (mode 2/3) and charging with direct
cur rent (mode 4) Combo 1
vehicle soc ket 242
242
Driving and parking