2021 MERCEDES-BENZ GLS SUV sensor

If
th e preceding tyre sizes are complemented by
th e+ symbol, the tyre pressure information
fo llowing sho wsalternative tyre pressures. Fuel
consum ption may then increase slightl y.
The load conditions "pa rtially laden" and "fully
laden" are de/ned in theta ble for di.erent num-
bers of passengers and amounts of luggage. The
actual number of seats may di.er from this. T
T
yr
yr e pr
e pr essur
essur e monit
e monit or
oring syst
ing syst em
em F
F
unction of t
unction of t he tyr
he tyre pr
e pressur
essur e monit
e monit or
oring syst
ing syst em
em
The system checks the tyre pressure and the tyre
te mp erature of the tyres /t tedtotheve hicle by
means of a tyre pressure sensor.
The tyre pressure and the tyre temp erature
appear in the on-board computer (/ page 403).
If th ere is a substantial pressure loss or if the tyre
te mp erature is excessive, you will be warned with
display messages (/ page 495) ortheh
wa rning lamp in the inst rument cluster
(/ page 517).
The tyre pressure monitoring system is only an
aid. It is the driver's responsibility toset the tyre pressure
tothere commended cold tyre pressure
suitable forth e operating situation.
In most cases, the tyre pressure monitoring sys-
te m will automatically update the new refere nce
va lues aTer you ha vechanged the tyre pressure.
Yo u can, ho wever, also update there fere nce val-
ues byrestarting the tyre pressure monitoring
system manually (/ page 404).
Syst
Syst em limits
em limits
The system may be impaired or may not function
particular lyin thefo llowing situations:
R incor rect refere nce values were ta ught in
R sudden pressure loss caused byafo re ign
object penetrating the tyre, forex ample
R there is a malfunction caused byano ther radio
signal source
Chec
Chec king t
king t he tyr
he tyr e pr
e pressur
essur e wit
e with t
h the tyr
he tyr e pr
e pressure
essure
monit
monit or
oring syst
ing syst em
em
R
R eq
equir uir ements:
ements:
R The vehicle is switched on. On-board computer:
4 Service 5
Tyres
One of thefo llowing displa ysappears:
R Current tyre pressure and tyre temp erature of
th e individual wheels: R
Tyre pressures will be displayed after a few
minutes of driving
R Tyre pressure monitor active: thete ach-in
process of the system is not yetcomple te. The
tyre pressures are already being monitored. #
Compare the tyre pressure with there com-
mended tyre pressure forth e cur rent ope rat-
ing condition (/ page 402).Additionall y, Wheels and tyres
403 403

R
Furthermore, the use of cer tain tyre types in
cer tain regions and areas of operation can be
high lybene/cial.
R Only use tyres and wheels of the same type
(summer tyres, winter tyres, MOExtended
tyres) and the same make.
R Only /t wheels of the same size on one axle
(leT and right).
It is only permissible to/t a di.e rent wheel
size in theev ent of a 0at tyre in order todrive
to the specialist workshop.
R Do not make any modi/cations tothe brake
system, the wheels or the tyres.
The use of shims or brake dust shields is not
permitted and may in validate theve hicle's
ge neral ope rating permit.
R V
V ehicles wit ehicles wit h a tyr
h a tyre pr
e pressur
essur e monit
e monit or
oring sy
ing sy s-
s-
t
t em:
em: all /t tedwheels must be equipped with
functioning sensors forth e tyre pressure mon-
itoring system.
R Attemp eratures below 7 °C use winter tyres
or all-season tyres mar kedi M+Sfor all
wheels. Wi
nter tyres pr ovide the best possible grip in
wintry road conditions.
R For M+S tyres, only use tyres with the same
tread.
R Obser vethe maximum permissible speed for
th e M+S tyres /t ted.
If th e tyre's maximum speed is below that of
th eve hicle, this must be indicated byan
appropriate label in the driver's /eld of vision.
R Run in new tyres at moderate speeds forthe
/r st 100 km.
R Replace the tyres aTer six years at the latest,
re ga rdless of wear.
R When r
When r eplacing wit
eplacing wit h tyr
h tyres t
es that do no
hat do no t f
t featur
eatur e
e
r
r un-0at
un-0at c
char
har act
acter
eris
istics:
tics: vehicles with
MOExtended tyres are not equipped with a
TIREFIT kit at thefa ctor y.Equip theve hicle
with a TIREFIT kit aTer replacing with tyres
th at do not feature run-0at characteristics,
e.g. winter tyres.
% You can permanently limit the maximum
speed for driving with winter tyres
(/ page 241). Fo
r more information on wheels and tyres, con-
ta ct a quali/ed specialist workshop.
Be sure toalso obser vethefo llowing fur ther rela-
te d subjects:
R Notes on tyre pressure (/ page 401)
R Tyre pressure table (/ page 402)
R Notes on the emer gency spa rewheel
(/ page 414) N No
ot
tes on int
es on int erc
erchanging wheels
hanging wheels &
W
WARNING
ARNING Risk of injury thro ugh di.erent
wheel sizes
Inter changing the front and rear wheels can
se verely impair the driving characteristics.
The disk brakes or wheel suspension compo-
nents may also be damaged. #
Only inter change the front and rear
wheels if the wheels and tyres ha vethe
same dimensions. Wheels and tyres
407
407

-
Athttps://be vo.mercedes-benz.com
- Inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop *
N
NO OTE
TE Overheating at high outside tempe r-
atures If an inappropriate coolant is used,
the engine
cooling system is not su1ciently pr otected
against overheating and cor rosion at high out-
side temp eratures. #
Only use coolant appr ovedby Mercedes-
Benz. #
Obser vethe inst ructions in the
Mercedes-Benz Speci/cations for Oper-
ating Fluids 320.1. Ha
ve the coolant regula rly re placed at a quali/ed
specialist workshop.
Proportion of antif reeze concentrate in the engine
cooling system:
R A minimum of 50% (antifreeze pr otection down
to about -37°C) R
A maximum of 55% (antif reeze pr otection
down to-45°C) N
No
ot
tes on windscr
es on windscr een w
een washer
asher 0uid
0uid Obser
vethe no tes on operating 0uids
(/ page 425). &
W
W ARNING
ARNING ‑ Risk of /re and injury due to
windscreen washer concent rate
Wi ndsc reen washer concent rate is highly 0am-
mable. It could ignite if it comes into contact
with hot engine component parts or the
ex haust system. #
Make sure that no windscreen washer
concent rate spills out next tothe /ller
opening. *
N NOOTE
TE Damage totheex terior lighting due
to unsuitable windscreen washer 0uid Unsuitable windscreen
washer 0uids may
damage the plastic sur face of theex terior
lighting. #
Only use windscreen washer 0uids which
are also suitable for use on plastic sur fa-
ces, e.g. MB SummerFit or MB WinterFit. *
N
NOOTE
TE Bloc ked spr aynozzles caused by
mixing windscreen washer 0uids #
Do not mix MB SummerFit and MB Win-
te rFit with other windscreen washer 0u-
ids. Do not use distilled or de-ionised
water. Other-
wise, the /ll le vel sensor may be triggered er rone-
ous ly.
Re commended windscreen washer 0uid:
R abo vefreezing point: e.g. MB SummerFit
R below freezing point: e.g. MB WinterFit
Fo rth e cor rect mixing ratio, referto the informa-
tion on the antifreeze container.
Mix washer 0uid with windscreen washer 0uid all
ye ar round. Te
ch nical data
433
433

Lights
Lights
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
:
Left dipped beam (examp le) *T
he cor responding light source is defecti ve. #
Drive on carefull y. #
Consult a quali/ed specialist workshop immediatel y.
% LED light sources: the display message forth e cor responding light appears only when all the light-emitting diodes
in the light are faulty.
: Malfunction See Owner's
Manual *T
heexterior lighting is malfunctioning. #
Consult a quali/ed specialist workshop.
*V Vehicles wit ehicles wit h a tr
h a trailer hitc
ailer hitc h:
h:a fuse may ha veblown. #
Stop theve hicle in accordance with the tra1c conditions. #
Check the fuses and replace them if necessary (/ page 397).
:
Automatic driving lights
inoperative *T
he light sensor for automatic driving lights is malfunctioning. #
Consult a quali/ed specialist workshop. 448 448
Displ
aymessages and warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
¸
Ã
ç
Ä
temporarily unavailable
Sensors dirty *F
ront and corner radar sensors (hereaTer "sensors") are malfunctioning. Possible causes:
R The senso rsare dirty
R Heavy rain or snow
R Extended country driving without other tra1c, e.g. in the desert
Driving systems and driving saf ety sy stems ma y be malfunctioning or temp orarily una vailable. The brake system, steer-
ing and drive system will continue tofunction normall y. #
Drive on
Once the causes of the problem are no longer present, the driving systems and driving saf ety sy stems will be available
again and the cor responding symbols will be switched o..
If th e display message does not disappear: #
Stop theve hicle in accordance with the tra1c conditions. #
Clean all sensor co vers from outside (/ page 229). #
Restart theve hicle. Displ
aymessages and warning/indicator lamps
481 481

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Tryto start theve hicle. #
Ifth eve hicle does not start, consult a quali/ed specialist workshop.
Cannot start engine See
Owner's Manual *T
he state of charge ofthe 48 V battery is too lo w.You can no longer start theve hicle. #
Switch o. elect rical consume rsthat are not requ ired. #
Connect a suitable charge r appr ovedfo r Mercedes-Benz with su1cient charge output tothe jump-start connection
point of the 12 V battery (/ page 391).
The 48 V battery is charge d via thevo ltage con verter in theve hicle.
Motor can be started again *The 48 V battery has been charge d automatically via thevo ltage con verter. #
Start theve hicle and drive for a while tocharge the 12 V battery and the 48 V batter y. T T
yr
yr e pr
e pr essur
essur e monit
e monit or
or Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
Tyre press. monitor cur-
rently unavailable *T
here is inter fere nce from a po werful radio signal source. As a result, no signals from the tyre pressure sensors are
being received. The tyre pressure monitoring system is temp orarily una vailable.
The tyre pressure monitoring system will restart au tomatically as soon as the cause has been recti/ed. #
Drive on.
Tyre press. monitor inoper-
ative *T
he tyre pressure moni toring system is malfunctioning. Display messa
ges and warning/indicator lamps
495 495

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions &
W
WARNING
ARNING There is a risk of an accident if the tyre pressure monitoring system is malfunctioning
The tyre pressure monitoring system cannot issue a warning if there is pressure loss in one or more of the tyres.
Ty res with insu1cient tyre pressure may impair the driving characteristics as well as steering and braking. #
Have the tyre pressure monitoring system checked at a quali/ed specialist workshop. Tyre press. monitor inoper-
ative No wheel sensors
*T
he wheels /tted do not ha vesuitable tyre pressure senso rs. The tyre pressure monitoring system is deactivated. #
Fit wheels with suitable tyre pressure sensors.
h
Wheel sensor(s) missing *T
here is no signal from the tyre pressure sensor of one or more wheels. No pressure value is displa yedfo rth e a.ected
tyre. #
Have thefa ulty tyre pressure sensor replaced at a quali/ed specialist workshop.
h
Check tyre(s) *T
he tyre pressure in one or more tyres has dropped signi/cantl y.
The wheel position is displa yed. A warning tone also sounds. &
W WARNI NG
ARNI NGRisk of an accident due toinsu1cient tyre pressure
R The tyres can burst.
R The tyres can wearexcessively and/or une venly.
R The driving characteristics as well as the steering and braking may be greatly impaired. 496
496
Display messages and
warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Switch o. theve hicle. #
Add 1 l of engine oil (/ page 368). #
Check the engine oil le vel.
No tes on engine oil (/ page 430).
5
Engine oil pressure Stop
Switch off engine *T
he oil pressure is too lo w.
* N
N O OTE
TE Engine damage caused bydriving with insu1cient oil pressure #
Avoid driving with insu1cient oil pressure. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Switch o. theve hicle. #
Consult a quali/ed specialist workshop.
5
Engine oil level cannot be
measured *T
he elect rical connection tothe oil le vel sensor has been inter rupted or the oil le vel sensor is faulty. #
Consult a quali/ed speciali stwo rkshop. Displ
aymessages and warning/indicator lamps
503 503