2021 MERCEDES-BENZ GLB SUV seats

A
A
djus
djus ting r
ting r ear seats mec
ear seats mec hanically
hanically &
W
WARNING
ARNING Risk of becoming trapped when
adjusting the seats
When you adjust a seat, you may trap yourself
or a vehicle occupant. #
When adjusting a seat, make sure that
no one has any body parts in the sweep
of the seat. &
W
WARNING
ARNING Risk of accident if the seat and
seat backrest are not engaged
The seat and seat backrest can fold forw ards.
There is a risk of thefo llowing, in particular:
R The vehicle occupant may be pressed
against the seat belt. The seat belt cannot
pr otect as intended and could cause addi-
tional injur y.
R Ach ild restraint system will no longer be
prope rly suppor ted or positioned and will
no longer ful/l its function as intended. R
The seat backrest will not be able restrain
objects or goods in the load compartment.
Alw ays ensu rethat the seat and seat backrest
are engaged, in particular:
R Before persons tr avel in theve hicle while
sitting on a seat with the easy entry and
ex itfeature
R ATer the seat has been adjusted.
R ATer the easy entry and exitfeature has
been used
R ATer the load compartment enlar gement
has been folded forw ards &
W
WARNING
ARNING Risk of injury from adjusting
th ere ar seats while driving
Yo u or other vehicle occupants could be trap-
ped and thereby injured. #
Adjust there ar seats before starting the
engine. *
N
NOOTE
TE Damage caused byobjects in the
fo ot we ll or behind there ar seats When adjusting
thefo re -and-aT position, the
re ar seats and/or the object can be damaged. #
Stow objects in a suitable place. This function is
available only forve hicles with a
mo vable rear ben chseat.
The components of there ar ben chseat can be
mo ved. You can mo vetheright-hand and leT-hand
parts toget her with the centre part independent ly
of each other. This allo wsyouto make thefo ot-
we ll lar ger in either the second or third row of
seats. 108
108
Seats and st
owing

#
LiT release handle 1and slide the cor re-
sponding part of the bench seat into the
desired position. #
Let go of release handle 1. #
Make sure that the seat is engaged. A
A
djus
djus ting t
ting t he r
he rear seat bac
ear seat bac kr
kres
ests mec ts mec hanically
hanically &
W
WARNING
ARNING Risk of injury due toseat
backrests folded forw ards
If th e seat backrest of there ar seat is folded
fo rw ards, persons in theth ird row of seats
may hit parts of the seat mechanism, espe-
cially in theeve nt of an accident, braking
manoeuvre or abrupt change of direction. #
Ifth ere is a person in theth ird row of
seats, there ar seat in front of them must
be folded back tothe driving position
before the journey begins. #
Persons in theth ird row of seats should
not rest their legs on a seat backrest
th at has been folded forw ards. Yo
u can fold the backrests of the second row of
seats forw ards toget in or out. &
W
WARNING
ARNING Risk of becoming trapped if the
seat is not engaged
The seat does not engage when folded for-
wa rds. The seat can fold backwards unexpect-
edl y,e.g. when accelerating, braking or in the
eve nt of an abrupt change of direction or an
accident.
Pe ople in the seat's sweep can become trap-
ped. #
If a seat is folded forw ards, alw aysfo ld it
back before driving o.. #
Make sure that the seat is engaged. R R
eq
eq uir
uir ements:
ements:
R The area into which the seat is folded is clear.
A
A djus
djusting t ting t he seat bac
he seat bac kr
krest
est
Yo u can fold the seat backrests on the second
ro w of seats forw ards forth efo llowing situations:
R For easier access tothe luggage compartment
R Vehicles with a third row of seats: forget ting
in or out
Yo u can set the seat backrest todi.erent angles. Seats and st
owing
109
109

If
yo u no longer requ ire the seat backrest tobe
fo lded down for loading or forget ting in and out,
fo ld it back into place. #
Hold the seat backrest in place with your hand
or bac k. #
Gently pull one of release loops 1and fold
th e seat backrest forw ards or backwards. #
Ensu rethat the seat backrest is engaged. F
F
olding t
olding t he seat bac
he seat bac kr
kres
est f t forw
orw ar
ards t
ds t o ent
o ent er t
er the
he
v
v ehicle (v
ehicle (v ehicles wit
ehicles wit h a t
h a thir
hirdro
d ro w of seats)
w of seats) &
W
WARNING
ARNING Risk of injury when folding the
seat backrest on the second row of seats
fo rw ards
If th e handle forth e seat backrest on the sec-
ond row of seats is pulled from theth ird row
of seats, the seat backrest on the second row
of seats will fold forw ards and will not engage.
Pe ople in the sweep of this seat backrest can
become trapped. #
When getting out of theth ird row of
seats, do not hold the seat backrest on
th e second row of seats. V
V
ehicles wit
ehicles wit h EASY
h EASY-ENTR
-ENTRY function:
Y function: If a seat on
th e second row of seats is located in the EAS Y-
ENTRY area, this will be shown on the multifunc-
tion display on the inst rument cluster. #
If necessar y,fold the seats on theth ird row
into position (/ page 128). #
Pull handle 1.
The seat backrest will fold forw ards.
* N
NOOTE
TE Damage tothe seat backrest handle
caused bypulling The handle can be damaged if it is used
topull
th e seat forw ards. 110
110
Seats and st
owing

#
Movethe seat forw ards bythe seat
backrest. #
Movethe seat forw ards bythe seat backrest.
Hold the seat /rmly in place while doing so.
F
F olding t
olding t he seat bac
he seat bac kr
kres
est bac t bac k t
k to t
o t he upr
he upr ight
ight
position (v
position (v ehicles wit
ehicles wit h t
h thir
hirdro
d ro w of seats)
w of seats) #
Swivel seat backrest back until it engages.
The seat backrest will remain in the cargo
position. #
Slide the seat backwards.
The seat will stop in the front position. #
Movethe seat into the desired position
(/ page 108). #
If necessar y,fold in the seats on theth ird row
( / page 126).
% Toincrease the size of the luggage compart-
ment, you can mo vethe seat backrests into
th e luggage compartment 0oor position
(/ page 123). Head r
Head r
es
estrtraints
aints A
A
djus
djus ting t
ting t he fr
he front seat head r
ont seat head r es
estrtraints manually
aints manually &
W
WARNING
ARNING Risk of accident due toadjust-
ing theve hicle settings while theve hicle is
in motion
Yo u could lose control of theve hicle in thefo l-
lowing situations in particular:
R ifyo u adjust the driver's seat, the head
re straint, the steering wheel or the mir ror
while theve hicle is in motion
R ifyo ufa sten your seat belt while theve hi-
cle is in motion #
Before starting theve hicle: in particular,
adjust the driver's seat, head restraint,
stee ring wheel and mir ror,and fasten
yo ur seat belt. &
W
WARNING
ARNING Risk of injury due tohead
re straints not being /tted or being adjus-
te d incor rectly
If head restraints ha venot been installed or
ha ve not been adjusted cor rectl y,there is an
increased risk of injury in the head and neck
area, e.g. in theeve nt of an accident or when
braking. #
Always drive with the head restraints /t-
te d. #
Before driving o., make sure forev ery
ve hicle occupant that the centre of the
head restraint supports the back of the
head at about eye le vel. Do not inter
change the head restraints of the
front and rear seats. Otherwise, you will not be
able toadjust the height and angle of the head
re straints co rrectl y.
Ad just the head restraint fore -and-aT position so
th at it is as close as possible tothe back of your
head. Seats and st
owing
111
111

#
T To r o r aise:
aise: pullthe head restraint up. #
T
To low
o low er:
er:press release knob 1inthe direc-
tion of the ar row and push the head restraint
down. #
T To mov o mov e t
e the dr
he dr iv
iver's head r
er's head r es
estrtraint f
aint f orw
orwar
ards:
ds:
press release knob 2and pull the head
re straint forw ards. #
T
T o mov
o mov e t
e the dr
he dr iv
iv er's head r
er's head r es
estr
traint bac k-
aint bac k-
w
w ar
ar ds:
ds: press release knob 2and push the
head restraint ba ckwards.
A
A djus
djusting t ting t he head r
he head r es
estr
traints of t
aints of t he r
he rear seats
ear seats
mec
mec hanical ly
hanical ly #
T
To r
o r aise:
aise: pullthe head restraint up. #
T
To low
o low er:
er:press release knob 1inthe direc-
tion of the ar row and push the head restraint
down. #
If t
If the centr
he centr e seat on t
e seat on t he second ro
he second row of seats
w of seats
is no
is no t occupied:
t occupied: pressthe head restraint down
all thewa y.
V
V ehicles wit
ehicles wit h a t
h a thir
hirdro
d ro w of seats
w of seats
The head restraints on theth ird row of seats ha ve
a usage position and a non-usage position. The
usage position is theex tended, top position in
which the head restraint engages; the non-usage
position is the bottom, retracted position of the
head restraint. If the seats on theth ird row of
seats are being used, the head restraint must be
in theto p, engaged usage position. #
If t If the t
he t hir
hirdro
d ro w of seats is occupied:
w of seats is occupied: movethe
head restraints totheve ry top and ha vethem
engage there. #
If t
If the t
he t hir
hirdro
d ro w of seats is no
w of seats is no t occupied:
t occupied:move
th e head restraints totheve ry bottom. 112
112
Seats and st
owing

F
F
itting/r
itting/r emo
emoving t
ving t he r
he rear seat head r
ear seat head r es
estrtraints
aints
R
R emo
emo ving
ving #
Release there ar seat backrest and fold it for-
wa rds slightly (/ page 123). #
Pull the head restraint up wards as far as it will
go. #
Push release knob 1inthe direction of the
ar ro w and pull out the head restraint. Inst
Inst alling
alling #
Inse rtthe head restraint su chthat the notches
on the bar are on the leT when vie wed in the
direction of tr avel. #
Push the head restraint down until it engages. #
Foldthere ar seat backrest back until it
engages. Con/gur
Con/gur
ing
ingt
the seat se
he seat se ttings
ttings Multimedia system:
4 © 5
Comfort 5
Seat comfort
A
A djus
djusting t ting t he bac
he bac kr
kres
es t cont
t cont our in t
our in t he lumbar
he lumbar
r
r egion of t
egion of t he seat bac
he seat bac kr
kres
es t (lumbar)
t (lumbar) #
Select Lumbar. #
Select the settings Zforth e desired seat. #
Adjust the air cushions.
A
A djus
djus ting t
ting t he bac
he bac kr
kres
est side bolst t side bolst ers
ers #
Select Side bolsters. #
Adjust the air cushion forth e desired seat. Selecting t
Selecting t
he massag
he massage pr
e progr
ogramme f
amme f or t
or the fr
he fr ont
ont
seats
seats Multimedia system:
4 © 5
Comfort 5
Massage #
Select Wave Massage orPulsating Massage . #
Start the prog ram forth e desired seat ;. #
T
To se
o se t t
t the massag
he massag e int
e intensity
ensity : switc
: switc h
hHigh
intensity on or o. . R R
ese ese tting seat se
tting seat se ttings
ttings Multimedia system:
4 © 5
Comfort 5
Seat comfort #
Select Îforth e desired seat. #
Con/ rmthe prom pt. Seats and st
owing
113
113

Switc
Switc
hing t
hing t he seat heating
he seat heating on/o.
on/o. &
W
WARNING
ARNING Risk of bu rns due torepeatedly
switching on the seat heating
Re peatedly switching on the seat heating can
cause the seat cushion and seat backrest pad-
ding tobecome very hot.
In particular, the health of persons with limited
te mp erature sensitivity or a limited ability to
re act tohigh temp eratures may be a.ected or
th ey may even su.er burn-like injuries. #
Do not repeatedly switch on the seat
heating. To
protect against overheating, the seat heating
may be temp orarily deactivated aTer it has been
switched on repeatedl y.
* N
NO
O TE
TE Damage tothe seats caused by
objects or documents when the seat
heater is switched on When
the seat heater is switched on, over-
heating may occur due toobjects or docu- ments placed on
the seats e.g. seat cushions
or child seats. This could cause damage tothe
seat sur face. #
Make sure that no objects or documents
are on the seats when the seat heater is
switched on. R
R
eq
eq uir
uir ements:
ements:
R The po wer supply is switched on. #
Press button 1repeatedly until the desired
heating le vel is set.
Depending on the heating le vel, up tothree
indicator lamps will light up. If all indicator
lamps are o., the seat heating is switched o..
% The seat heating will automatically switch
down from theth re e heating le vels aTer 8, 10
and 20 minutes until the seat heating
switches o.. Switc Switc
hing t
hing t he seat v
he seat v entilation
entilation on/o.
on/o. R
R
eq
eq uir
uir ements:
ements:
R The po wer supply is switched on. 114
114
Seats and st
owing

#
Press button 1repeatedly until the desired
blo wer setting has been reached.
Depending on the blo wer setting, up tothree
indicator lamps will light up. If all indicator
lamps are o., the seat ventilation is switched
o.. S S
t
teer
eer ing wheel
ing wheel A
A
djus
djusting t ting t he st
he steer
eering wheel manual ly
ing wheel manually &
W
WARNING
ARNING Risk of accident due toadjust-
ing theve hicle settings while theve hicle is
in motion
Yo u could lose control of theve hicle in thefo l-
lowing situations in particular:
R ifyo u adjust the driver's seat, the head
re straint, the steering wheel or the mir ror
while theve hicle is in motion
R ifyo ufa sten your seat belt while theve hi-
cle is in motion #
Before starting theve hicle: in particular,
adjust the driver's seat, head restraint,
stee ring wheel and mir ror,and fasten
yo ur seat belt. &
W
WARNING
ARNING Risk of entrapment forch ildren
when adjusting the steering wheel
Children could injure themsel ves if they adjust
th e steering wheel. #
Never lea vechildren unattended in the
ve hicle. #
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. U
Unloc
nloc king
king #
Foldrelease le ver1 down as far as it will go. Seats and st
owing
115
115