2021 MERCEDES-BENZ GLB SUV warning

#
Ifth e bonnet can still be liTed slightl y,open
th e bonnet again and close it with a little force
until it engages cor rectl y. Engine oil
Engine oil
Chec
Chec
king t
king t he engine oil lev
he engine oil lev el using t
el using the on-board
he on-board
com
com put
puter
er
R
R eq
eq uir
uir ements:
ements:
R The engine has been warmed up.
R The vehicle is par ked on a le vel sur face.
R The engine is running at idle speed.
R The bonnet is closed.
The engine oil le vel is de term ined during driving.
De term ining the engine oil le vel can take up to
30 minutes with a normal driving style and even
longer with an active driving style. On-board computer:
4 Service 5
Engine oil level
One of thefo llowing message s will appear onthe
inst rument displa y:
R Engine oil level Measuring now: measu rement
of the oil le vel is not yet possible. #
Repeat there qu est aTer a maximum of
30 minutes' driving.
R Engine oil level OK andthe bar display for
indicating the oil le vel on the inst rument dis-
play is green and is between "min" and "max":
th e oil le vel is cor rect.
R Engine oil level Add 1,0 l andthe bar display
fo r indicating the oil le vel on the inst rument
display is orange and is below "min": #
Add 1 l of engine oil.
R Reduce engine oil level andthe bar display for
indicating the oil le vel on the inst rument dis-
play is orange and is abo ve"max": #
Drain o. any excess engine oil that has been
added. Todo so, consult a quali/ed specialist
wo rkshop.
R For engine oil level turn on ignition #
Switch on theve hicle tocheck the engine oil
le ve l.
R Engine oil level System inoperative: The oil
leve l sensor is defective or not connected. #
Consult a quali/ed specialist workshop.
R Engine oil level System currently unavail. #
Close the bonnet.
T T opping up engine oil
opping up engine oil &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. 316
316
Maintenance and care

Chec
Chec
king t
king t he coolant lev
he coolant lev el
el &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. &
W
WARNING
ARNING Risk of scalding from hot cool-
ant
If yo u open the cap, you could be scalded. #
Let the mo tor cool down before opening
th e cap. #
When opening the cap, wear pr otective
glo ves and saf ety glasses. #
Open the cap slo wlytorelease pressure. #
Park theve hicle on a le vel sur face. #
Check the coolant temp erature display in the
inst rument cluster.
The coolant temp erature must be below 70°C. #
Slowly turn cap 1anti-clockwise torelease
ove rpressure. #
Continue turning cap 1anti-clockwise and
re mo veit. The coolant le
vel is cor rect in thefo llowing cases:
R Ifth e engine is cold, the coolant is up to
mar ker bar 2.
R Ifth e engine is warm,th e coolant is up to
1.5 cm overth e mar ker bar 2. #
If necessar y,top up with coolant that has
been appr ovedfo r Mercedes-Benz.
% Further information on coolant (/ page 379) T
T
opping up t
opping up t he windscr
he windscreen w
een washer syst
asher syst em
em &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. 318
318
Maintenance and care

&
W
W ARNI NG
ARNI NG‑ Risk of /re and injury due to
windscreen washer concent rate
Wi ndsc reen washer concent rate is highly 0am-
mable. It could ignite if it comes into contact
with hot engine component parts or the
ex haust system. #
Make sure that no windscreen washer
concent rate spills out next tothe /ller
opening. #
Remo vecap 1bytheta b. #
Top up thewa sher 0uid.
% Further information about the windscreen
wa sher 0uid (/ page 380) K K
eeping t
eeping t he air
he air-w
-wat
ater duct fr
er duct fr ee
ee #
Keep the area between the bonnet and the
windscreen free of deposits, e.g. ice, snow
and lea ves. Cleaning and care
Cleaning and care
Inf
Inf
or
ormation on w
mation on w ashing t
ashing the v
he vehicle in a car w
ehicle in a car w ash
ash &
W
WARNING
ARNING Risk of an accident due to
re duced braking po wer aTer washing the
ve hicle
Braking e1ciency is reduced aTer washing the
ve hicle. #
ATer theve hicle has been washed, brake
carefully while paying attention tothe
tra1c conditions until braking po wer has
been fully restored. Maintenance and ca
re
319
319

R
The air conditioning system is set toair-recir-
culation mode.
R Parking Assist PARKTRONIC is deactivated.
R V
V ehicles wit
ehicles wit h 360° Camer
h 360° Camer a:
a:the front image is
activated aTer appr ox. eight seconds.
If one of the settings cannot be selected, this is
displa yedby a% behind there specti veset-
ting.
Ab ove a speed of 20 km/h Car wash mode is
automatically deacti vated.
The following settings are reset when car wash
mode is deacti vated:
R The outside mir rors are folded out.
R The rain sensor is activated.
R The rear wind owwiper is activated.
R The air conditioning system is set tofresh air
mode.
R Parking Assist PARKTRONIC is reset tothe
pr ev iously selected setting.
R The windo wsand the sliding sunroof remain
closed. R
V
V ehicles wit ehicles wit h 360° Camer
h 360° Camer a:
a:the front image is
deactivated at speeds abo ve18 km/h. A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating aut
ating automatic car w
omatic car w ash mode
ash mode R
R
eq
eq uir
uir ements:
ements:
R theve hicle is stationar y.
R the engine is running.
Multimedia system: 4 © 5
Settings 5
Quick access
A
A ctiv
ctiv ating aut
ating aut omatic car w
omatic car w ash mode
ash mode #
Select Car wash mode . #
Select Start.
If one of the settings cannot be selected, this is
displa yedby a% behind there specti veset-
ting.
% For an overview of the settings made when
activating automatic car wash mode
(/ page 319). Deactiv Deactiv
ating aut
ating aut omatic car w
omatic car w ash mode
ash mode #
Select Stop.
The automatic car wash settings are reset.
% The automatic car wash mode is automatically
deacti vated as soon as a speed of 20 km/h is
ex ceeded. Inf
Inf
or
ormation on using a high-pr
mation on using a high-pr essur
essure cleaner
e cleaner &
W WARNING ARNING Risk of an accident when using
high-pressure cleane rswith round-spr ay
nozzles
The water jet can cause extern ally invisible
damage.
Components damaged in this wa y may un ex-
pectedly fail. #
Do not use a high-pressure cleaner with
round-spr aynozzles. #
Have damaged tyres or chassis parts
re placed immediatel y. Maintenance and ca
re
321 321

%
Have workor repairs todecorative foils car-
ri ed out at a quali/ed specialist workshop,
e.g. in a Mercedes-Benz Se rvice Centre. N
No
ot
tes on car
es on car e of car par
e of car par ts
ts &
W
WARNING
ARNING Risk of entrapment if the wind-
screen wipers are switched on while the
windscreen is being cleaned
If th e windscreen wipers are set in motion
while you are cleaning the windscreen or
wiper blades, you can be trapped bythe wiper
arm. #
Always switch o. the windscreen wipers
and theve hicle before cleaning the wind-
screen or wiper blades. &
W
WARNING
ARNING Risk of burns from theta ilpipe
and tailpipe trims
The exhaust tailpipe and tailpipe trims can
become very hot. If you come into contact
with these parts of theve hicle, you could burn
yo urself. #
Always be particular lycareful around the
ta ilpipe and theta ilpipe trims and super-
vise children especially closely in this
area. #
Allow vehicle parts tocool down before
to uching them. To
avo id damage totheve hicle, obser vethe no tes
on cleaning and care of thefo llowing vehicle
parts:
Wheels and r Wheels and r ims
ims
R Use water and acid-free alloy wheel cleaners.
R Do not use acidic alloy wheel cleaners to
re mo vebrake dust. This could damage wheel
bolts and brake components.
R Toavo id cor rosion of the brake disks and
brakepads, drive theve hicle for a few minu tes
aTer cleaning before parking it. The brake
disks and brakepads warm up and dry out.
W W indo ws
indo ws
R Clean the windo wsinside and outside with a
damp clo thand with a cleaning agent recom-
mended for Mercedes-Benz. R
Do not use dry clo ths or abrasive or sol vent-
based cleaning agents toclean the inside of
windo ws.
% ATer changing the wiper blades or treating
th eve hicle with wax, clean the windscreen
th oroughly with cleaning agents recommen-
ded for Mercedes-Benz. Failure toobser vethe
application instructions may result in damage,
smear mar ksor dazzling spots.
% Remo veextern al fogging or dirt on the wind-
screen in front of the multifunction camera.
Otherwise, driving systems and driving saf ety
systems may be impaired or not available
(/ page 199).
W
W iper blades iper blades
R Movethe wiper arms into there placement
position (/ page 155).
R With th e wiper arms folded out, clean the
wiper blades with a damp clo th.
% Make sure that the wiper blades are coated.
The coating can lea veresidues on a clo th. Do
not rubth e wiper blades excessively or clean
th em too oTen. 324
324
Maintenance and care

Ext
Ext
er
erior lighting
ior lighting
R Clean the lenses with a wet sponge and mild
cleaning agent, e.g. car sha mpoo.
R Only use cleaning agents or cleaning clo ths
th at are suitable for plastic lenses.
Sensors
Sensors R Clean the sensors in the front and rear bump-
ers with a soT clo thand car shampoo
(/ page 199).
R When using a high-pressure cleaner, main tain
a minimum distance of 30 cm.
Rev
Rev er
ersing camer
sing camer a and 360° Camera
a and 360° Camera
R Use clean water and a soT clo thtoclean the
camera lens.
R Do not use a high-pressure cleane r.
T
T ailpipes
ailpipes
R Clean with a cleaning agent recommended for
Mercedes-Benz, especially in the winter and
aTer washing theve hicle.
R Do not use acidic cleaning agents. T
T r
railer hitch
ailer hitch
R Obser vethe no tes on care in the trailer hitch
manufacturer's operator manual.
R Do not clean the ball neck with a high-pres-
sure cleaner or sol vent.
R Remo vetraces of rust on the ball, forex ample,
with a wire brush.
R Remo vedirt with a lint-free clo th.
R ATer cleaning, lightly oil or grease the ball
head.
% Before using trailers with anti-torsional cou-
pling, obser vethe manufacturer's operator
manual. N
No
ot
tes on car
es on car e of t
e of the int
he int er
erior
ior &
W WARNING
ARNING Risk of injury from plastic parts
breaking o. aTer the use of sol vent-based
ca re products
Care and cleaning products containing sol-
ve nts can cause sur faces in the cockpit to
become porous. When the airbags are
deplo yed, plastic parts may break away. #
Do not use any care or cleaning products
containing sol vents toclean the cockpit. &
W WARNING
ARNING Risk of injury or fatal injuries
from bleached seat belts
Bleaching or dyeing seat belts can se verely
we aken them.
This can, forex ample, cause seat belts to tear
or fail in an accident. #
Never bleach or dye seat belts. To
avo id damage totheve hicle, obser vethefo l-
lowing no tes on cleaning and care:
Seat belts Seat belts R Clean with luk ewarmand soapy water.
R Do not use chemical cleaning agents.
R Do not dry byheating them toove r 80°C or
ex posing them todirect sunlight.
Display Display
R Switch o. the display and let it cool down. Maintenance and care
325
325

Emerg
Emerg
ency
ency R
R
emo
emo ving t
ving t he safe
he safe ty v
ty vest
est The saf
etyve sts are loca ted in the st owage com-
partments in the driver's and front passenger
door. #
Pull out the saf etyve st bag bythe loop. #
Open the saf etyve st bag and pull out the
saf etyve st.
% There are also sa fety vest co mpartments in
th ere ar door st owage compartments in which
saf etyve sts can be stored. 1
Maximum number of washes
2 Maximum wash temp erature 3
Do not bleach
4 Do not iron
5 Do not tumble dry
6 Do not dry clean
7 Class 2 saf etyve st
The requ irements de/ned bythe legal standard
are only ful/lled if the saf etyve st is the cor rect
size and is ful lyclosed.
Re place the saf etyve st in thefo llowing cases:
R there 0ective strips are dama ged or dirty
R the maximum permissible number of washes
is exceeded
R the 0uorescence has faded W
W
ar
ar ning tr
ning tr iangle
iangle R
R
emo
emo ving t
ving t he w
he war
ar ning tr
ning tr iangle
iangle #
Open the load compartment 0oor. #
Remo vewarning triangle 1. 328
328
Breakdown assistance

Se
Se
tting up t
tting up t he w
he war
arning tr
ning tr iangle
iangle #
Fold side re0ectors 1upwards toform a tri-
angle and attach at theto p using upper press-
stud 2. #
Fold legs 3down and out tothe side. F
F
irs
irst-aid kit t-aid kit (soT-sided)
(soT-sided) ov
over
erview
view Fi
rs t-aid kit (soT sided) 1is under the load com-
partment 0oor. R
R
emo
emo ving t
ving t he
he/re
/re e
extinguisher
xtinguisher &
W WARNING ARNING Risk of accident due toan
inco rrectly secured /re extinguisher in the
driver's foot we ll
A /re extinguisher may impede pedal tr avel or
block a depressed pedal. This jeopardises
the operating and road saf ety
of theve hicle.
The /re extinguisher can be 0ung around and
injure the driver or other vehicle occupants. #
Always store and secure the /re extin-
guisher in the brac ket. #
Do not remo vethe /re extinguisher while
driving. #
LeT-hand
LeT-hand dr
driv
ive v
e v ehicle:
ehicle: pulltab1 upwards. #
Right-hand dr
Right-hand dr iv
ive v
e v ehicle:
ehicle: pulltab1 down-
wa rds. #
Remo ve/re extinguisher 2. Breakdown assistance
329
329