2021 MERCEDES-BENZ GLA SUV key

Opening or closing t
Opening or closing t
he g
he gar
arag
ag e door
e door
R
R eq
eq uir
uir ements:
ements:
R The cor responding button is prog rammed to
operate the door. #
Press and hold buttons 1,2or3 until the
door opens or closes. #
If indicator lamp 40ashes yellow aTer
appr oximately 20 seconds: press and hold the
pr ev iously pressed button again until the door
opens or closes.
Clear
Clear ing t
ing the g
he gar
arag
ag e door opener memory
e door opener memory #
Press and hold buttons 1and 3.
Indicator lamp 4lights up yello w. #
If indicator lamp 40ashes green: release
buttons 1and 3.
The entire memory has been dele ted. Electr
Electr
ic par
ic parking br
king br ake
ake F
F
unction of t
unction of t he electr
he electric par
ic parking br
king br ak
ake (appl
e (appl ying
ying
aut
aut omaticall
omaticall y)
y) &
W WARNING ARNING Risk of accident and inju rydue
to leaving children unattended in theve hi-
cle
If ch ildren are leT unattended in theve hicle,
th ey could, in particular:
R open doors, thereby endangering other
persons or road users.
R get out and be struck byoncoming tra1c.
R operate vehicle equipment and become
trapped, forex ample.
In addition, thech ildren could also set the
ve hicle in motion by,fo rex ample:
R releasing the parking brake.
R changing the transmission position.
R starting theve hicle. #
Never lea vechildren unattended in the
ve hicle. #
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. #
Keep theve hicle key out of there ach of
ch ildren. The electr
The electr
ic par
ic parking br
king br ak
ake is applied if t
e is applied if t he tr
he trans-
ans-
mission is in position
mission is in position j
jand one of t
and one of t he f
he follo
ollowing
wing
conditions is
conditions is ful/lled:
ful/lled:
R The vehicle is switched o..
R The seat belt tongue is not inse rted in the seat
belt buckle of the driver's seat and the driver's
door is opened.
% Toprev ent application: pull the handle of the
electric parking brake (/ page 223).
In t
In t he f
he f ollo
ollowing situations, t
wing situations, t he electr
he electric par
ic parking
king
br
br ak
ak e is also applied:
e is also applied:
R The HOLD function is keeping theve hicle sta-
tionar y.
R Active Parking Assist is keeping theve hicle
stationar y.
R Active Distance Assist DISTRONIC is bringing
th eve hicle toa standstill. 222
222
Driving and parking

%
The electric parking brake is only securely
applied if there d! indicator lamp is lit
continuousl y.
R
R eleasing eleasing #
Switch on theve hicle. #
Pull handle 1.
The red! indicator lamp in the inst rument
clus ter goes out.
Emerg
Emerg ency br
ency br aking
aking #
Press and hold handle 1.
As long as theve hicle is in motion, the
Release parking brake message is displayed
and there d! indicator lamp 0ashes.
When theve hicle has been braked toa stand-
still, the electric parking brake is applied. The
re d! indicator lamp lights up in the inst ru-
ment clus ter. Inf
Inf
or
ormation on collision det
mation on collision det ection on a park
ection on a park ed
ed
v
v ehicle
ehicle If a collision is de
tected when theto w- awa y pro-
te ction is primed on a loc kedve hicle, you will re
ceive a noti/cation in the multimedia system
when you switch theve hicle on.
Yo u will receive information about thefo llowing
points:
R The area of theve hicle that may ha vebeen
damaged.
R The forc e of the impact.
The following situation can lead toinadver tent
activation:
R The par kedve hicle is mo ved, forex ample, in a
two-s tore yga rage.
% Deactivate tow- awa y protection in order to
pr ev ent inadver tent activation. If you deacti-
va te to w-awa y protection, collision de tection
will also be deactivated.
Syst
Syst em limits em limits
De tection may be restric ted in thefo llowing situa-
tions:
R theve hicle is damaged without impact, for
ex ample, if an outside mir ror is torn o. or the
paint is damaged byakey
R an impact occurs at low speed R
the electric parking brake is not applied N No
ot
tes on par
es on par king up t
king up the v
he vehicle
ehicle If
yo u lea vetheve hicle par ked up for longer than
six weeks, it may su.er damage thro ugh disuse.
The 12 V battery may also be impaired or dam-
aged byheavy discharging.
V
V ehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: do not dis-
connect the 12 V battery even if theve hicle is leT
idle for a lengt hyperiod.
% Further information can be obtained at a
qu ali/ed specialist workshop. S
S
t
tandb
andb y mode (e
y mode (e xt
xtension of t
ension of t he st
he start
arter batt
er batt er
ery's
y's
per
per iod out of use)
iod out of use) S
S
t
tandb
andb y mode function
y mode function
% This function is not available for all models.
If standby mode is activated, energy loss will be
minimised during extended periods of non-opera-
tion. 224
224
Driving and parking

Example: if
the option is switched on and a
ro ute toa new destination has been calcula-
te d, this destination would not be take n into
account forth e learning function.
Cr
Cr eating ne
eating ne w t
w themes
hemes #
Select ©. #
Select THEMES. #
Select WSet theme .
The settings which are sa ved in theth eme are
shown. #
Select Continue r. #
Select AudioandNavigation (Navigation) and
store the active settings in theth eme. #
Select Continue r. #
Select an entry screen. #
Select Continue r. #
Select an image. #
Enter the names into the entry /eld and con-
/rm with a. #
Select Save. Syst
Syst
em se
em se ttings
ttings Ov
Ov
er
ervie
vie w of t
w of t he sy
he syst
stem se
em se ttings menu
ttings menu In
the system settings menu, you can make set-
tings in thefo llowing menus and control ele-
ments:
R Display
- Styles
- Instrument lighting
- Display brightness
- Edge lighting
- Day/night design
R Control elements
- Keyboard language and handwriting recog-
nition
- Sensitivity of theto uchpad
- Sensitivity of theTo uch Controls
R LINGU ATRO NIC
R Sound
- Enter tainment
- Navigation and tra1c announcements -
Telephone
- Voice ampli/cation tothere ar
R Connectivity
- Wi-Fi, Blue tooth ®
, NFC
R Time & date
R Language
R Units for distance
R SoTware updates
R Data import/export
R PIN pr otection
R System Reset Inf
Inf
or
ormation on im
mation on im port
portant syst
ant syst em updat
em updat es
es Impor
tant system updates may be necessary for
th e security of your multimedia system's data.
Install these updates, or else the security of your
multimedia system cannot be ensured.
A system update consists of thre e steps:
R Downloading or copying of the data requ ired
fo r installation
R Installation of the downloaded system update 302 302
MBUX multimedia system

%
The connection procedure may di.er depend-
ing on the device. Follow the inst ructions that
are shown in the displa y.Fu rther information
can be found in the manufacturer's operating
inst ructions. #
Select Internet settings .#
Select Connect via Wi-Fi .#
Select Add hotspot.
Connecting using a QR code
Connecting using a QR code #
Select the options rofthe desired Wi-Fi
networ k. #
Select Connect using QR code. #
Scan the displa yed QR code with the device to
be connected.
The Wi-Fi connection is established.
Connecting using a secur Connecting using a secur itykey
ity key #
Select the options rofthe desired Wi-Fi
networ k. #
Select Connect using security key. #
Have the security key displa yed on the device
to be connected (see the manufacturer's oper-
ating inst ructions). #
Enter this security key on the multimedia sys-
te m. #
Con/rm the entry with ¡.
Connecting using a WPS PIN
Connecting using a WPS PIN #
Select the options rofthe desired Wi-Fi
networ k. #
Select Connect using WPS PIN input.
The multimedia system generates an eight-
digit PIN. #
Enter this PIN on the device tobe connected. #
Con/rm the entr y.
Connecting using a butt
Connecting using a butt on
on #
Select the options rofthe desired Wi-Fi
networ k. #
Select Connect via WPS PBC. #
Select "Connect via WPS PBC" in the options
on the device tobe connected (see the manu-
fa cturer's operating instructions). #
Press the WPS button on the device tobe con-
nected. #
Select Continue inthe multimedia system.
A
A ctiv
ctiv ating aut
ating aut omatic connection
omatic connection #
Select Connect via Wi-Fi. #
Select the options rofthe desired Wi-Fi
networ k. #
Activate Permanent Internet connection .
Connecting wit
Connecting wit h a kno
h a known W
wn Wi-F
i-Fi ne
i ne tw
twork
ork #
Select Connect via Wi-Fi. #
Select a Wi-Fi networ k.
The connection is established again.
Con/gur
Con/gur ing
ingt
the multimedia syst
he multimedia syst em as a W
em as a Wi-F
i-Fi ho
i ho t-
t-
spo
spo t f
t for e
or e xt
xter
er nal de
nal de vices
vices
The type of connection established depends on
th e device tobe connected. The function must be
suppor tedby the multimedia system and bythe
device tobe connected. The type of connection
established must be selected on the multimedia
system and on the device tobe connected. #
Select Vehicle hotspot. 304 304
MBUX multimedia system

#
Select Connect device to vehicle hotspot.
Connecting using WPS PIN g
Connecting using WPS PIN g ener
eneration
ation #
Select Connect using WPS PIN generation. #
Enter the PIN shown in the media display on
th e device tobe connected and con/ rm.
Connecting using WPS PIN entry
Connecting using WPS PIN entry #
Select Connect using WPS PIN input. #
Enter the PIN that is shown on theex tern al
device's displ ayon the multimedia system.
Connecting using a butt
Connecting using a butt on
on#
Select Connect via WPS PBC. #
Press the push button on the device tobe
connected (see the manufacturer's operating
inst ructions). #
Select Continue .
Connecting using a secur
Connecting using a secur itykey
ity key #
Select Connect device to vehicle hotspot.
A secu rity key is displa yed. #
Select theve hicle from the device tobe con-
nected. The vehicle is displ ayed with the
DIRECT-MBUX XXXXX network name. #
Enter the security key which is shown in the
media display on the device tobe connected. #
Con/rm the entr y.
Connecting using NFC
Connecting using NFC #
Select Connect via NFC. #
Activate NFC on the mobile device (see the
manufacturer's operating instructions). #
Hold the device tobe connected at theve hi-
cle's NFC inter face. #
Select Finished.
The mobile device is now connected tothe
multimedia system hotspot via NFC.
Gener
Gener ating a ne
ating a ne w secur
w securitykey
ity key #
Select Vehicle hotspot. #
Select Generate security key.
A connection will be established wi th the
ne wly created security key. #
T To sav o sav e a secur
e a secur itykey
ity key :
:select Save.
When a new security key is sa ved, all existing
Wi -Fi connections are then disconnected. If
th eWi -Fi connections are being re-estab-
lished, the new security key must be en tere d. Syst
Syst
em language
em language N
No
ot
tes on t
es on t he syst
he syst em language
em language
This function allo wsyouto determ ine the lan-
guage forth e menu displa ysand the navigation
announcements. The selected language a.ects
th ech aracters available for entr y.The navigation
announcements are not available in all languages.
If a language is not available, the navigation
announcements will be in English.
Se Se tting t
tting t he syst
he syst em language
em language
Multimedia system:
4 © 5
Settings 5
System
5 ® Language #
Set the language. MBUX multimedia system
305
305

*
N
N O
OTE
TE Damage from automatic braking If one of
thefo llowing functions is switched
on, theve hicle brakes automatically in cer tain
situations:
R Active Brake Assist
R Active Distance Assist DISTRONIC
R HOLD function
R Active Parking Assist
To avoid damage totheve hicle, deactivate
th ese systems in thefo llowing or similar situa-
tions: #
during towing #
in a car wash *
N
NO OTE
TE Damage due tounsuitable car wash #
Before driving into a car wash make sure
th at the car wash is suitable forth eve hi-
cle dimensions. #
Ensu rethere is su1cient ground clear-
ance between the underbody and the
guide rails of the car wash. #
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is su1cient. To
avo id damage toyour vehicle when using a car
wa sh, ensu rethefo llowing beforehand:
R Active Distance Assist DISTRONIC is deactiva-
te d.
R The HOLD function is switched o..
R The side windo wsand sliding sunroof are com-
ple tely closed.
R The blo werfo rth eve ntilation/heating is
switched o..
R The windsc reen wiper switch is in position g.
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise theta ilgate could
open unintentionall y.
R In automatic car washes with con veyo r sys-
te ms:
- Neutral iis engaged. -
V Vehicles wit ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: If
yo uwo uld like tolea vetheve hicle while it
is being washed, make sure theke y is
located in theve hicle. The park position
j isotherwise automatically engaged.
% If, aTer the car wash, youre mo vethewax
from the windscreen and wiper rubbers, this
will pr event smearing and reduce wiper noise.
A
A ut
ut omatic car w
omatic car w ash mode
ash mode
In car wash mode, theve hicle is prepared for driv-
ing into the automatic car wash. Car wash mode
can be activated at a speed of up to20 km/h
Ac tivate (/ page 350).
The following settings are made when car wash
mode is activated:
R The outside mir rors are folded in.
R Topreve ntthe windscreen washer system
from starting up automaticall y,thera in sensor
is deactivated.
R The rear wind owwiper is deacti vated.
R The windo wsand the sliding sunroof are
closed. Maintenance and care
349
349

To
avo id damage toyour vehicle, obser vethefo l-
lowing when using a high-pressure cleaner:
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise theta ilgate could
open unintentionall y.
R Maintain a distance of at least 30 cm tothe
ve hicle.
R V
V ehicles wit
ehicles with decor h decorativ
ative f
e foil:
oil: Parts of your
ve hicle are co vered with a decorative foil.
Maintain a distance of at least 70 cm between
th efo il-co vered parts of theve hicle and the
nozzle of the high-pressure cleaner. Mo vethe
high-pressure cleaner nozzle around whilst
cleaning. The waterte mp erature of the high-
pressure cleaner must not exceed 60°C.
R Obser vethe information on the cor rect dis-
ta nce in the equipment manufacturer's oper-
ating inst ructions.
R Do not direct the nozzle of the high-pressure
cleaner directly at sensitive parts, such as
tyres, gaps, electrical components, batteries,
light sources and ventilation slits. W W
ashing t
ashing t he v
he vehicle b
ehicle b y hand
y hand *
N
NOOTE
TE Engine damage due towa ter ing ress #
Take care not topoint thewa ter jet
directly towa rdsth e air inlet grille below
th e bonnet. obser
vethe legal requ irements, e.g. in a number
of countries, washing byhand is only permitted in
special lydesignated wash ba ys. #
Use a mild cleaning agent, e.g. car shampoo. #
Washtheve hicle with luk ewarm water using a
soT car sponge. When doing so, do not
ex pose theve hicle todirect sunlight. #
Carefully hose theve hicle o. with water and
dry using a chamois.
% Obser vethe no tes on the care of car parts
(/ page 353). N
No
ot
tes on paintw
es on paintw or
ork/matt
k/matt /nish
/nishpaintw
paintw or
ork care
k care To
avo id damaging the paintwork and inter fering
with the driving assistance systems, please
obser vethefo llowing no tes: P
P
aint
aint
R Insect remains: soak with insect remo ver and
ri nse o. the treated areas aTer wards.
R Bird droppings: soak with water and rinse o.
aTer wards.
R Tree resin, oils, fuels and greases: remo veby
ru bbing gently with a clo thsoaked in petro-
leum ether or lighter 0uid.
R Coolant and brake 0uid: remo vewith a damp
clo thand clean water.
R Tar stains: use tarre mo ver.
R Wax: use silicone remo ver.
R Do not attach sti ckers, /lms or similar materi-
als. Only ha ve/lm attached tothe bumper at
a quali/ed specialist workshop.
R Remo vedirt immediatel y,where possible.
Matt
Matt /nish
/nish
R Only use care products appr ovedfor
Mercedes-Benz.
R Do not attach stic kers, /lms or similar materi-
als. Only ha ve/lm attached tothe bumper at
a qu ali/ed specialist workshop. Main
tenance and ca re
351
351

F
F
r
req
eq uency band and maximum tr
uency band and maximum tr ansmission out-
ansmission out-
put
put F
F
r
req
eq uency band
uency band Maximum tr
Maximum transmis-
ansmis-
sion output
sion output
2 m frequency band
144-174 MHz 50 W
Te rrestrial Trunked
Ra dio (TETRA)
380 - 460 MHz 10 W
70 cm frequency band
430 - 470 MHz 35 W
Tw o-w ayradio
2G 2 W
Tw o-w ayradio
3G/4G/5G 0.5 WThe
following devices can be used in theve hicle
without restrictions:
R two- wayra dios with a maximum transmission
output of up to100 mW R
two-w ayradios with transmitter frequencies in
th e 380 - 420 MHz frequency band and a
maximum transmission output of up to2 W
(TETRA)
R mobile phones (2G/3G/4G/5G)
There are no restrictions when positioning the
aerial on the outside of theve hicle forth efo llo w-
ing frequency bands:
R TETRA
R 2G/3G/4G/5G R R
egulat
egulat or
ory r
y r adio
adio identi/cation
identi/cation and not
and notes
es R
R
egulat
egulat or
ory r
y r adio
adio identi/cation
identi/cation of small com
of small compo-
po-
nents
nents Manufacturer information about
radio-based vehi-
cle components can be found using thekey
phrase "Regulatory radio identi/cation" in the Dig-
ital Owner's Manual in theve hicle, on the internet
and in the app. R
R
egulat
egulat or
ory r
y r adio
adio identi/cation
identi/cation – Indonesia
– Indonesia Manufacturer information about
radio-based vehi-
cle components can be found using thekey
phrase "Regulatory radio identi/cation – Indone-
sia" in the Digital Operator's Manual in theve hi-
cle, on the internet and in the app.
% These are not small components. Information
about small components can be found using
th eke y phrase "Regulatory radio identi/cation
of small components". F F
urt
urt her
her com
com ponent-speci/c
ponent-speci/c inf
infor
ormation
mation Fu
rther component-speci/c information can be
fo und using theke y phrase "fur ther component-
speci/c information" in the Digital Owner's Man-
ual in theve hicle, on the internet and in the app. 400
400
Te
ch nical data