2021 MERCEDES-BENZ E-CLASS SALOON sensor

Fo
r fur ther information about there cycling and
disposal of end-of-life vehicles, and theta ke -back
conditions, please visit the national
Mercedes-Benz website foryo ur countr y. Mer
Mer
cedes-Benz GenuineP
cedes-Benz GenuineP ar
arts
ts
+ ENVIR ENVIR
ONMENT ONMENT AL NO
AL NOTE
TE Environmental
damage caused bynot using recycled
re conditioned components Mercedes‑Benz
AGo.ers recycled recondi-
tioned components and parts with the same
qu ality as new parts. The same entitlement
from the implied warranty is valid as for new
parts. #
Recycled reconditioned components and
parts from Mercedes‑Benz AG. *
N
NO
OTE
TE Impai rment of the operating e1-
ciency of there straint systems from
installing accessor y parts or fromrepairs
or we lding Airbags and seat belt
tensioners, as well as
control units and sensors forth ere straint sys-
te ms, may be ins talled in thefo llowing areas
of your vehicle:
R Doors
R Door pillars
R Door sills
R Seats
R Cockpit
R Instrument clus ter
R Centre console
R Lateral roof frame #
Do not ins tall accessory parts such as
audio systems in these areas. #
Do not car ryout repairs or welding. #
Have accessory parts retro/tted at a
qu ali/ed specialist workshop. Yo
u could jeopardise the operating saf ety of your
ve hicle if you use parts, tyres and wheels as well
as accessories releva nt tosaf ety which ha venot
been app rove dby Mercedes-Benz. Saf ety-re leva nt
systems, e.g. the brake system, may malfunction.
Only use Mercedes-Benz GenuineParts or parts of
equal qualit y.Only use tyres, wheels and acces-
sory parts that ha vebeen speci/cally appr oved
fo ryo ur vehicle model.
Mercedes-Benz tests original pa rts and con ver-
sion parts and accessory parts that ha vebeen
speci/cally appr ovedfo ryo ur vehicle model for
th eir reliability, saf ety and suitability. Despite
ongoing mar ketre sear ch, Mercedes-Benz is
unable toassess other parts. Mercedes-Benz
th erefore accepts no responsibility forth e use of
such parts in Mercedes-Benz vehicles, even if
th ey have been o1cially appr oved or independ-
ently appr ovedby ate sting centre.
Ce rtain parts are only o1cial lyappr ovedfor
installation or modi/cation if they comply with
legal requ irements. All Mercedes-Benz Genuine-
Pa rts meet the appr oval requ irements. The use of
non-appr oved parts may in validate theve hicle's
ge neral ope rating permit. 24 24
General no
tes

Go
vernmental entities are themsel ves, in individ-
ual cases and within the applicable legal frame-
wo rk, authorised toread out data from theve hi-
cle. In the case of an accident, information that
can help with an in vesti gation can, therefore, be
ta ke n from the airbag control unit, forex ample.
Oper
Oper ational dat
ational dat a in t
a in the v
he vehicle
ehicle
This is data rega rding the operation of theve hicle,
which ha vebeen processed bycont rol units.
This includes thefo llowing data, forex ample:
R vehicle status information such as the speed,
longitudinal acceleration, lateral acceleration,
number of wheel revo lutions or thefa stened
seat belts display
R ambient conditions, su chastemp erature, rain
sensor or distance sensor
Generall y,the use of these data is temp orar y;
th ey will not be stored be yond the period of oper-
ation and will only be processed within theve hicle
itself. Control units oTen contain data memories
fo rve hicle keys,fo rex ample. Their use permits
th ete mp orary or permanent documentation of
te ch nical information about theve hicle's operat- ing state, component loads, main
tenance requ ire-
ments and tech nical events or faults.
Depending on theve hicle equipment, thefo llo w-
ing data are stored:
R operating status of system components, such
as /ll le vels, tyre pressure or battery status
R malfunctions or faults in impor tant system
components, such as lights or brakes
R system reactions in special driving situations,
such as airbag depl oyment or the inter vention
of stability cont rol systems
R information on events leading tovehicle dam-
age
In cer tain cases, it may be requ ired tostore da ta
th at wo uld ha veotherwise been used only temp o-
rari ly. This may be the case if theve hicle has
de tected a malfunction, forex ample.
If yo u use services, such as repair services and
maintenance work, stored operational data as
we ll as theve hicle identi/cation number can be
re ad out and used. They can be read out by
service network emplo yees, such as workshops
and manufacturers or third parties, such as break- down services. The same is true in
the case of
wa rranty claims and quality assurance measures.
In general, there adout is per form ed via the legally
prescribed port forth e diagnostics connection in
th eve hicle. The operational data that are read out
document tech nical states of theve hicle or of
individual components and assist in the diagnosis
of malfunctions, compliance with warranty obli ga-
tions and quality impr ovement. Tothat end, these
data, in particular information about component
loads, tech nical events, malfunctions and other
fa ults may be transmitted along with theve hicle
identi/cation number tothe manufacturer. Fur-
th ermore, the manufacturer is subject toproduct
liability. Forth is reason the manufacturer also
uses operational data from theve hicle, forex am-
ple, forre calls. These data can also be used to
ex amine the customer's warranty and guarantee
claims.
Fa ult memories in theve hicle can be reset by a
service outl etor at your requ est as part of repair
or maintenance work. 40 40
General no
tes

wa
rning lamp lights up. It goes out no later than a
few seconds aTer theve hicle is star ted. The com-
ponents of there straint system are then func-
tional. Malfunctioning r
Malfunctioning r
es
estrtraint syst
aint syst em
em A malfunction has occur
red in there straint sys-
te m if:
R the0075 restraint system warning lamp does
not light up when theve hicle is switched on
R the0075 restraint system warning lamp lights
up continuously or repeatedly during a journey
All v
All v ehicles, ex
ehicles, excep
cep t PL
t PL UG-IN HYBRID:
UG-IN HYBRID: &
W
WARNING
ARNING Risk of injury due tomalfunc-
tions in there straint system
Co mp onents in there straint system ma y be
acti vated unintentionally or not deploy as
intended in an accident. #
Have there straint system checked and
re paired immediately at a quali/ed spe-
cialist workshop. Plug-in h
Plug-in h
ybr
ybr id:
id: &
D
DAN
AN GER
GER Risk of fatal injuries due to
re straint system malfunctions
Co mp onents in there straint system ma y be
acti vated unintentionally or not deploy as plan-
ned in an accident. In theeve nt of an acci-
dent, the high-voltage on-board electrical sys-
te m may not be deactivated as intended.
Yo u may su.er an electric shock if youto uch
th e damaged components of the high-voltage
on-board electrical system. #
Have there straint system checked and
re paired immediately at a quali/ed spe-
cialist workshop. #
ATer an accident, switch o. theve hicle
immediatel y. F
F
unction of t
unction of t he r
he res
estrtraint syst
aint syst em in an accident
em in an accident How
there straint system works is de term ined by
th e se verity of the impact de tected and the type
of accident anticipated:
R Frontal impact R
Rear impact
R Side impact
R Rollover
The activation thre sholds forth e components of
th ere straint system are de term ined based on the
ev aluation of the sensor values measured at vari-
ous points in theve hicle. This process is pre-e mp-
tive in nature. The triggering/deployment of the
components of there straint system must take
place in good time at the start of the collision.
Fa ctors which can only be seen and measured
aTer a collision has occur red do not play a deci-
sive role in the deployment of an airbag. Nor do
th ey prov ide an indication of airbag deployment.
The vehicle may be deformed signi/cantly without
an airbag being depl oyed. This is the case if only
parts which are relatively easily deformed are
a.ec tedand thera te of vehicle deceleration is
not high. Con versely, an airbag may be depl oyed
ev en though theve hicle su.ers only minor defor-
mation. If very rigid vehicle parts such as longitu-
dinal membe rsare hit, this may result in su1-
ciently high le vels of vehicle deceleration. 44
44
Occupant saf
ety

R
There are no ha rdobjects, e.g. coat hangers,
hanging on thegr ab handles or coat hooks.
R There are no accessory parts, such as mobile
navigation devices, mobile phones or cup
holders, within the deployment area of an air-
bag, e.g. on the cockpit, on the door, on the
side wind owor on the side trim.
In addition, no connecting cables, tensioning
straps or retaining straps must be routed or
attached totheve hicle within the deployment
area of an airbag. Alw ays comply with the
accessory manu facturer's ins tallation inst ruc-
tions and, in particular, the no tes on suitable
places for installation.
R There are no heavy, sharp-edged or fragile
objects in the poc kets of your clo thing. Store
such objects in a suitable place. Limit Limit
ations of t
ations of t he prot
he pr otection pro
ection pro vided b
vided by airbags
y airbags &
W
WARNING
ARNING Risk of injury due tomodi/ca-
tions tothe co ver of an airbag
If yo u modify the co ver of an airbag or a1x
objects such as stic kers to it,the airbag may
no longer function cor rectl y. #
Never modify the co ver of an airbag and
do not a1x objects toit. The installation location of an airbag is identi/ed
by the AIRB AGsymbol (/ page 50). &
W
WARNING
ARNING Risk of injury or death due to
th e use of unsuitable seat co vers
Due tounsuitable seat co vers,th e airbags
cannot pr otect vehicle occupants as intended.
In addition, the operation of the automatic
front passenger airbag shuto. could be
re stric ted. #
You should only use seat co vers that
ha ve been appr oved forth e cor respond-
ing seats byMercedes-Benz. &
W
WARNI NG
ARNI NGRisk of injury due tomalfunc-
tioning sensors in the door
The function of the airbags can be impaired
due tomodi/cations or incor rect wo rkper-
fo rm ed on the doors or door trim, or if the
doors are damaged. #
Never modify the doors or parts of the
doors. #
Always ha veworkon the doors or door
trim car ried out at a quali/ed specialist
wo rkshop. &
W
WARNING
ARNING Risk of injury due todeplo yed
airbag
A depl oyed airbag no longer o.ers any pr otec-
tion. #
Have theve hicle towe dto a quali/ed
specialist workshop in order tohave the
deplo yed airbag replaced. Ha
ve deplo yed airbags replaced immediatel y.52
52
Occupant saf
ety

This does not lock or unlo
ckthe fuel /ller 0ap.
Plug-in h
Plug-in h ybr
ybrid:
id:the soc ket 0ap is also loc ked and
unloc ked. The soc ket 0ap can be opened even if a
ke y is de tected in the car.
The vehicle is not unloc ked:
R ifyo u ha veloc kedth eve hicle using thekey
R ifyo u ha veloc kedth eve hicle using KEYLESS-
GO Loc
Loc
king/unloc
king/unloc king t
king the v
he vehicle wit
ehicle wit h KEYLESS-GO
h KEYLESS-GO R R
eq eq uir
uir ements:
ements:
R The key is outside theve hicle.
R The dis tance between theke y and theve hicle
does not exceed 1 m.
R The driver's door and the door on which the
door handle is used are closed.
* NO
NO TE
TEDamage totheve hicle caused by
unintentionally opening the boot lid R
when using an automatic car wash
R when using a high pressure cleaner #
Deacti vate the function of theke y in
th ese situations.
or #
Make sure that theke y is at a minimum
dis tance of 3 m away from theve hicle. Obser
vethe no tes:
R onwashing theve hicle in a car wash
(/ page 367)
R on using a high pressure cleaner
(/ page 368) #
T To unloc o unloc k t
k the v
he v ehicle:
ehicle: touch the inner sur face
of the door handle. #
T To loc o loc k t
k the v
he v ehicle:
ehicle: touch sensor sur face 1
or 2. #
Conv Conv enience closing:
enience closing: touch recessed sensor
sur face 2 until the closing process has been
comple ted. Opening and closing
83 83

&
W
W ARNI NG
ARNI NGRisk of becoming trapped
despite reve rsing function
The reve rsing function will not react:
R tosoT, light and thin objects, e.g. /n gers
R towa rdsth e end of the closing procedure
In these situations in particular, there ve rsing
function cannot pr event someone being trap-
ped. #
Ensure that no body parts are in the
closing area. #
If someone is trapped, use one of thefo l-
lowing options:
R Press the008B button on thekey.
R Press there mo teoperating switch on
th e driver's door.
R Press the closing or locking button
on the boot lid.
R Pull the boot lid handle. HANDS-FREE A
HANDS-FREE A
CCESS function
CCESS function Wi
th HANDS-FREE ACCESS you can open, close
or inter rupt boot lid mo vement byper form ing a
kicking mo vement under there ar bumper.
The kicking mo vement triggers the opening or
closing process alternatel y.
Obser vethe no tes when opening (/ page 86)
and closing (/ page 87)the boot lid. %
Awa rning tone sounds while the boot lid is
opening or closing. &
W
WARNING
ARNING Risk of burns caused bya hot
ex haust system
The vehicle exhaust system can become very
hot. If you use HANDS-FREE ACCESS, you
could burn yourself bytouching theex haust
system. #
Always ensu rethat you only make a kic k-
ing mo vement within the de tection range
of the sensors. *
N
NOOTE
TE Damage totheve hicle caused by
unintentionally opening the boot lid R
when using an automatic car wash
R when using a high pressure cleaner #
Deacti vate the function of theke y in
th ese situations.
or #
Make sure that theke y is at a minimum
dis tance of 3 m away from theve hicle. Opening and closing
89
89

When making
the kicking mo vement, make sure
th at you are standing /rmly on thegr ound. Yo u
could otherwise lose your balance, e.g. on ice.
Obser vethefo llowing no tes:
R The key is behind theve hicle.
R Stand at least 30 cm away from theve hicle
while per form ing the kicking mo vement.
R Do not come into contact with the bumper
while making the kicking mo vement.
R Do not car ryout the kicking mo vement too
slo wly.
R The kicking mo vement must be towa rdsthe
ve hicle and back again. 1
Detection range of the sensors
If se veral consecutive kicking mo vements are not
successful, waitte n seconds.
Syst
Syst em limits
em limits
The system may be impai red or may not function
in thefo llowing cases:
R The sensors are dirty, e.g. due toroad salt or
sno w.
R The kicking mo vement is made using a pros-
th etic leg. The boot lid could be opened or closed uninten-
tionall
y,in thefo llowing situations:
R A person's arms or legs are moving in the sen-
sor de tection range, e.g. when polishing the
ve hicle or picking up objects.
R Objects are mo ved or placed behind theve hi-
cle, e.g. the hose of a fuel dispenser, a charg-
ing cable or lug gage
R Clamping straps, tarp aulins or other co verings
are pulled overth e bumper.
R A pr otective mat with a length reaching over
th e boot sill down into the de tection range of
th e sensors is used.
R The pr otective mat is not secured cor rectl y.
R Workis being done on the trailer hitch, trailers
or rear bicycle rack s.
Deacti vate the function of theke y (/ page 79) or
do not car rytheke y about your person in such
situations. 90 90
Opening and closing

1
Closing
2 Toopen
The buttons on the driver's door take precedence. #
T
To st
o st ar
art aut
t aut omatic oper
omatic oper ation:
ation:pressthe0062
button be yond the point of resis tance or pull
and release it. #
T
To int
o int err
errup
upt aut
t aut omatic oper
omatic oper ation:
ation:press or pull
th e0062 button again. When
theve hicle is switched o., you can con-
tinue tooperate the side windo ws.
This function is available for around four minutes
or until a front door is opened.
A A ut ut omatic rev
omatic rever
ersing function of t
sing function of t he side windows
he side wind ows
If an obs tacle impedes a side window during the
closing process, the side window will open again
automaticall y.The automatic reve rsing function is
only an aid and is not a substitute foryo ur atten-
tiveness. #
During the closing process, make sure that no
body parts are in the closing area. &
W
WARNING
ARNING Risk of becoming trapped
despite there being reve rsing pr otection
on the side window
The reve rsing function does not react:
R tosoT, light and thin objects, e.g. /n gers.
R during resetting.
The reve rsing function cannot pr event some-
one from becoming trapped in these situa-
tions. #
During the closing process, make sure
th at no body parts are in the closing
area. #
If someone becomes trapped, press the
0062 button toopen the side window
again. A
A
ut
ut omatic function of t
omatic function of t he side windows
he side wind ows In
thefo llowing cases, the side windo wswill be
closed automatically when theve hicle is switched
o.:
R if it starts torain
Ra in is de tected byara in sensor on the wind-
screen.
R inextreme temp eratures
R aTer a cer tain time (depending on the on-
board electrical system voltage)
R ifth ere is a malfunction in the po wer supply
The side windo wswill be closed as far as theve n-
tilation position. 92
92
Opening and closing