2021 MERCEDES-BENZ CLA SHOOTING BRAKE cooling

A
Vehicles with THERM ATIC operating unit
(with/wi thout stationary heater): _sets
th e air distribution
Ve hicles with THERM OTRO NIC operating unit
(with/wi thout stationary heater): q
adjusts temp erature on front passenger side Oper
Oper
ating t
ating t he climat
he climat e contr
e control syst
ol system
em Switc
Switc
hing climat
hing climat e contr
e control
olon/o.
on/o. #
T
To switc
o switc h on:
h on:setthe air0ow toleve l 1 or
higher using theH button. #
T
To switc
o switc h
ho.:
o.: setthe air0ow toleve l 0 using
th eH button.
If climate control is switched o., the windo ws
may mist up more quickl y.Switch climate control
o. only brie0 y. Switc
Switc
hing t
hing t he A/C function
he A/C function on/o.
on/o. using t
using the air
he air
conditioning contr
conditioning contr ol panel
ol panel The A/C
function heats, cools and dehumidi/es
th eve hicle's interior air. #
Press the¿/Á button.
Switch o. the A/C function only brie0y; other-
wise, the windo wsmay mist up more quickl y.
Condensation may drip from the underside of the
ve hicle when cooling mode is active. This is not
indicati veof a fault. Calling up t
Calling up t
he air conditioning menu
he air conditioning menu Calling up t
Calling up t
he air conditioning menu using t
he air conditioning menu using t he
he
multimedia syst
multimedia syst em
em #
Select one of thete mp erature displa ysatthe
lo we r edge of the media displa y.
Calling up t
Calling up t he air
he air-conditioning menu using t
-conditioning menu using t he
he
butt
butt on on t
on on t he climat
he climat e contr
e control panel
ol panel #
Press theA button on the climate control
panel. A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating t
ating the A/C function via t
he A/C function via t he
he
multimedia syst
multimedia syst em
em Multimedia system:
4 Climate menu 5
First row of seats
The A/C function heats, cools and dehumidi/es
th eve hicle's interior air. #
Select A/C. Se Se
tting climat
tting climat e contr
e control t
ol to aut
o aut omatic mode
omatic mode In automatic mode,
the set temp erature is con-
trolled and maintained at a constant le velby the
air suppl y. #
Press theà button. #
T
To switc
o switc h t
h to manual mode:
o manual mode: pressthe_ or
à button.
In automatic mode, you can choose between /ve
di.erent air quantities using theH button.
Au tomatic mode is retained. Climate control
157
157

imately 30 minutes, depending on
thete mp era-
ture set. #
T
To activ
o activ at
ate:
e: press the Á button.
Re sidual heat will be switched o. automaticall y.Pr
Pr
e-entr
e-entr y climat
y climat e contr
e control using t
ol using t hekey
he key F
F
unction of pr
unction of pr e-entr
e-entry climat
y climat e contr
e control using t
ol using t he
he
key
key
Before entering theve hicle, the driver's seat area
or the whole vehicle interior can be brie0y pre-
wa rmed or pre-cooled.
When pre-cooling, thefo llowing functions are acti-
va ted as needed:
R Automatic climate control
R Blower
R Seat ventilation
When pre-heating, thefo llowing functions are acti-
va ted as needed:
R Automatic climate control
R Blower
R Seat heater R
Steering wheel heater
R Mirror heater
R Rear wind owheater
Se Se tting pr
tting pr e-entr
e-entry climat
y climat e contr
e control via t
ol via thekey
he key
Multimedia system:
4 Climate menu 5
Pre-entry climate ctrl
Switc
Switc hing
hingon/o.
on/o. #
Select Z. #
Select Pre-entry climate control via key.
Switc
Switc hing pr
hing pr e-entr
e-entry climat
y climat e contr
e control via t
ol via thekey
he key
on/o.
on/o.
R R eq
eq uir
uir ements:
ements:
R The high-voltage battery is charge d su1-
cient ly.
R The function has been activated via the multi-
media system. #
T
To switc
o switc h on:
h on:unlock theve hicle.
The climate cont rol functions are activated for
up to/ve minutes for pre-heating and pre-
cooling. Pre-entry climate control via
theke y cann otbe
activated more than twice when theve hicle is
switched o.. #
T
To switc
o switc h
ho.:
o.: push the& button up or
down.
The following functions will remain active once the
ve hicle has been star ted:
R Seat heating
R Seat ventilation Pr
Pr
e-entr
e-entr y climat
y climat e contr
e control at depar
ol at depar tur
ture time
e time Pr
Pr
e-entr
e-entr y climat
y climat e contr
e control f
ol for depar
or depar tur
ture time func-
e time func-
tion
tion &
W
WARNI NG
ARNI NGRisk of fatal injury due toexpo-
sure toextreme heat or cold in theve hicle
If persons, particular lych ildren, are subjected
to prolonged exposure tointense heat or cold,
th ere is a risk of se vere injury or even death. #
Never lea vepersons, particular lych il-
dren, unattended in theve hicle. Climate cont
rol
159
159

The
vehicle interior can be air conditioned when
th eve hicle is par ked.
When theve hicle is connected topowe r supply
equipment, priority is given tocharging the high-
vo ltage battery toa speci/ed minimum charge.
The running time of pre-entry climate control may
be reduced under thefo llowing conditions:
R The vehicle is not connected topowe r supply
equipment.
R The high-voltage battery is not charge d su1-
cient ly.
Wi th active pre-ent ryclimate cont rol,th ech arge
le ve l of the high-voltage battery may be reduced,
ev en if thech arging cable connector is connec-
te d.
Fo r cooling, thefo llowing functions are activated
as needed:
R Automatic climate control
R Blower
R Seat ventilation Fo
r heating, thefo llowing functions are activated
as needed:
R Automatic climate control
R Blower
R Seat heating
R Steering wheel heater
R Mirror heater
R Rear wind owheater
Se
Se tting pr
tting pr e-entr
e-entry climat
y climat e contr
e control f
ol for depar
or depar ture
ture
time
time
Multimedia system:
4 Climate menu 5
Pre-entry climate ctrl
Se Se tting a single depar
tting a single depar tur
ture time
e time #
Select ONCE. #
Set a departure time.
Changing t
Changing t he activ
he active depar
e departur
ture time
e time #
Select the pen icon next tothe displa yed
departure time. #
Set a departure time. Se
Se
tting t
tting t he w
he week
eekpr
pro/le
o/le #
Select WEEK PROFILE . #
Set the desired departure times, e.g. every
day at 8 a.m.
Selecting t
Selecting t he zone
he zone #
Select Z. #
Select Driver's seat only.
If th eDriver's seat only setting is deactivated,
pre-entry climate control take s place forthe
entire vehicle.
A
A ctiv
ctiv ating/deactiv
ating/deactiv ating pr
ating pre-entr
e-entry climat
y climat e contr
e control
ol
f
f or depar
or depar tur
ture time
e time
R
R eq
eq uir
uir ements:
ements:
R The high- voltage battery is charge d su1-
cient ly.
R The function has been activated via the multi-
media system. #
T
To activ
o activ at
ate:
e: set the departure time
(/ page 160).
Pre-entry climate control for departure time
switches on a maximum of 55 minutes before
th e selected departure time. It will remain 160 160
Climate control

active
for ano ther /ve minutes if the departure
is dela yed. #
T
To deactiv
o deactiv at
ate:
e: push the& button up or
down.
The following functions will remain active once the
ve hicle has been star ted:
R Seat heating
R Seat ventilation A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating immediat
ating immediat e pr
e pre-entr
e-entr y cli-
y cli-
mat
mat e contr
e contr ol
ol &
W
WARNI NG
ARNI NGRisk of fatal injury due toexpo-
sure toextreme heat or cold in theve hicle
If persons, particular lych ildren, are subjected
to prolonged exposure tointense heat or cold,
th ere is a risk of se vere injury or even death. #
Never lea vepersons, particular lych il-
dren, unattended in theve hicle. Air-conditioning of
theve hicle interior can con-
tinue for up to50 minutes, e.g. if the journey is
inter rupted. The colours of
the indicator lamp ha vethefo llo w-
ing meanings:
R Blue: Blue: cooling is activated.
R R
Red:
ed: heating is activated.
R Y
Yello w:
ello w:the departure time has been preselec-
te d. #
Set the desired temp erature using the w
button. #
Press button 1.
The red or blue indicator lamp on button 1
will light up or go out. S
S
t
tationar
ationar y heat
y heater/v
er/ventilation
entilation S
S
t
tationar
ationar y heat
y heater/v
er/ventilation function
entilation function
% The following function is equipment-depend-
ent.
R The air inside theve hicle is heated or ventila-
te dto the set temp erature.
R The air inside theve hicle cann otbe cooled
down to temperatures below the outside tem-
perature.
R Ifth e outside temp erature changes, ventilation
mode automatically switches toheating mode
or heating mode automatically switches to
ve ntilation mode.
The stationary heate r andtheex haust gas outl et
are situated in front of theright-hand front wheel. Climate control
161
161

can start
theve hicle in emer gency ope ration
mode. Mar
ked space (e xample with cup holder without
co ver) #
Open the co ver of the mar ked space 2if
necessar y. #
Make sure that the mar ked space 2is
em pty. #
Remo vetheke y1 from theke yring. #
Place theke y1 inthe mar ked space 2on
th e symbol 3.
The vehicle will start aTer a short time.
When youre mo vetheke y1 from the mar ked
space 2,theve hicle can be driven. For fur-
th er engine starts ho wever,theke y1 must
be located in the mar ked space 2onthe
symbol 3during the entire journe y. #
Have theke y1 checked at a quali/ed spe-
cialist workshop.
If t
If t he v
he v ehicle does no
ehicle does no t st
t start:
art: #
Place theke y1 inthe mar ked space 2and
lea veitth ere. #
V
Vehicles wit
ehicles wit h manual tr
h manual tr ansmission:
ansmission: Depress
th e clutch pedal. #
Depress the brake pedal and start theve hicle
using the start/s top button.
% You can switch on the po wer supply or the
ve hicle with the start/s top button. Obser
veany information rega rding display mes-
sages that can be displ ayed on the inst rument
displa y. S
S
t
tar
ar ting t
ting t he v
he vehicle via R
ehicle via R emot
emote Online Ser
e Online Ser vices
vices Cooling or heating t
Cooling or heating t
he v
he vehicle int
ehicle int er
erior bef
ior bef ore
ore
st
st ar
ar ting t
ting t he jour
he jour ney
ney
Ensu rethefo llowing before starting the engine:
R The legal stipulations in the area where your
ve hicle is par ked allow engine starting via
smartphone.
R It is safe tostart and runth e engine where
yo ur vehicle is par ked.
R The fuel tank is su1cient lyfull.
R The star ter battery is su1ciently charge d.
Char
Char ging t
ging t he st
he start
arter batt
er batt er
ery bef
y bef or
ore st
e st ar
arting t
ting t he
he
jour
jour ney
ney
Yo u can receive a message on your smartphone
when the state of charge ofthe star ter battery is
lo w. You can then start theve hicle with the smart-
phone tocharge the batter y.The vehicle is auto-
matically switched o. aTer ten minutes. 170
170
Driving and parking

Combo 2
vehicle soc ket #
Press the centre rear section of soc ket 0ap
1 and swing the soc ket 0ap forw ards and
open.
The % indicator lamp 2and status dis-
play 3light up white. %
When theve hicle is switched on (the õ
displ ayis lit in the Instrument Display), soc ket
0ap 1cannot be opened. #
Press cat ch7 tothe leT and fold open
soc ket co ver5.
% Vehicles with a vehicle soc ket combo requ ire
only connection 8forth ech arging cable
connector. Open only the upper part of soc ket
co ver5. #
Tocharge at a mains soc ket, insert the mains
plug into the mains soc ket of theex tern al
po we r source tothe stop and set the maxi-
mum charging cur rent if requ ired
(/ page 202). #
Insert thech arging cable connector into vehi-
cle soc ket connection 8tothe stop. If the
wa llbox/charging station is not equipped with
a ch arging cable, inse rtthe plug of theve hi-
cle's charging cable into thewa llbox/charging
station soc ketto the stop.
Make sure that thech arging cable is not taut
when inser ted. The
# indicator lamp 4and status dis-
play 30ash orange and, as soon as the high-
vo ltage battery is charge d, green.
When thech arging cable is connected totheve hi-
cle, theve hicle cann otbe star ted or mo ved.
At the start of thech arging process, thech arge
le ve l display is shown in the Instrument Display
with a charging prediction. The charging predic-
tion either refers to the predicted charge leve l at
th e set departure time, or the time at which the
high- voltage battery will be fully charge d.
% Depending on thete mp erature, thefa n and
bat tery cooling system may audibly switch on
during thech arging process.
% Ifth eve hicle is idle for lengt hyperiods and
connected tothe mains suppl y,the high-volt-
age battery will be rech arge d automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control). 208 208
Driving and parking

%
Depending on thete mp erature, thefa n and
bat tery cooling system may audibly switch on
during thech arging process.
% Ifth eve hicle is idle for lengt hyperiods and
connected tothe mains suppl y,the high-volt-
age battery will be rech arge d automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control). Ending t Ending t
he dir
he direct curr
ect curr ent c
ent char
harging pr
ging pr ocess (mode
ocess (mode
4)
4) R
R
eq
eq uir
uir ements:
ements:
R The distance between theke y and theve hicle
does not exceed 1 m. Combo 1 v
Combo 1 v
ehicle socket
ehicle soc ket #
Press charging inter ruption button 3.
The charging process is ended. The %indi-
cator lamp 1lights up white. The vehicle
soc ket is unloc ked. #
Press and hold button 2onthech arging
cable connector and remo vethech arging
cable connector from theve hicle soc ket. %
Ifyo u cannot remo vethech arging cable con-
nector, unlock theve hicle and repeat the pro-
cedure. If thech arging cable connector is still
loc ked, contact a quali/ed specialist work-
shop. #
Close the soc ket co ver and the soc ket 0ap.
Combo 2 v
Combo 2 v ehicle socket
ehicle soc ket Driving and parking
213
213

&
W
WARNI NG
ARNI NGRisk of an accident due to
va pour poc kets form ing in the brake sys-
tem
The brake 0uid constantly absorbs moisture
from the air. This lo wersthe boiling point of
th e brake 0uid. If the boiling point is too lo w,
va pour poc kets may form inthe brake system
when the brakes are applied hard.
This impairs the braking e.ect. #
Have the brake 0uid rene we d at the
speci/ed inter vals. Ha
ve the brake 0uid regula rly re placed at a quali-
/ed specialist workshop.
Only use a brake 0uid appr ovedby Mercedes-
Benz according toMB-F reigabe or MB-Appr oval
331.0. Coolant Coolant
N
No
ot
tes on coolant
es on coolant
Obser vethe no tes on operating 0uids
(/ page 396). &
W
WARNING
ARNING Risk of /re‑ and injury from
antif reeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Allow the engine tocool down before
yo uto p up the antifreeze. #
Make sure that no antifre eze spills out
next tothe /ller opening. #
Thoroughly clean the antifreeze from
component parts before starting the
ve hicle. *
N NOOTE
TE Damage caused byincor rect cool-
ant #
Only use coolant that has been premixed
with there qu ired antifreeze pr otection.
Information on coolant is available at thefo l-
lowing locations:
R Inthe Mercedes-Benz Speci/cation for
Operating Fluids 320.1 -
Athttps://be vo.mercedes-benz.com
- Inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop *
N NOOTE
TE Overheating at high outside temp er-
atures If an inappropriate coolant is used,
the engine
cooling system is not su1ciently pr otected
against overheating and cor rosion at high out-
side temp eratures. #
Only use coolant appr ovedby Mercedes-
Benz. #
Obser vethe inst ructions in the
Mercedes-Benz Speci/cations for Oper-
ating Fluids 320.1. Ha
ve the coolant regula rly re placed at a quali/ed
specialist workshop.
Proportion of antif reeze concentrate in the engine
cooling system:
R A minimum of 50% (antifreeze pr otection down
to about -37°C) 404
404
Te
ch nical data