2021 MERCEDES-BENZ CLA COUPE clock

In
thefo llowing situations, there is a danger of
being loc ked out when the function is activated:
R while theve hicle is being tow- star ted or
pushed
R ifth eve hicle is being tested on a roller dyna-
mome ter Loc
Loc
king/unloc
king/unloc king t
king the v
he vehicle wit
ehicle wit h t
h the emer-
he emer-
g
g ency key
ency key Loc
Loc
king/unloc
king/unloc king t
king the dr
he driv
iv er's door wit
er's door wit h t
h the
he
emerg
emerg encykey
ency key
% Ifyo u wish tolock theve hicle entirely using
th e emer gency key,/rst press the button for
locking from the inside while the driver's door
is open. Then proceed tolock the driver's
door using the emer gency key. #
Remo vethe emer gency key (/ page 84). #
Inse rtthe emer gency key as far as it will go
into opening 1inthe co ver. #
Pull and hold the door handle. #
Pull the co ver on the emer gency key as
straight as possible away from theve hicle until
it re leases. #
Release the door handle. #
T To unloc o unloc k:
k:turn the emer gency key anti-cloc k-
wise toposition 1. #
T
To loc
o loc k:
k:turn the emer gency key clockwise to
position 1. #
Carefully press the co ver onto the lock cylin-
der until it engages and is seated /rml y. Opening and closing
89
89

Loc
Loc
king t
king t he fr
he front passeng
ont passeng er door and r
er door and r ear doors
ear doors #
Insert a suitable object, e.g. the emer gency
ke y,into opening 1onthe door loc k. #
T
To loc
o loc k t
k the
he leT-hand
leT-hand side of t
side of the v
he vehicle:
ehicle: turn
th e emer gency key anti-clockwise as far as it
will go. #
T
T o loc
o loc k t
k the r
he r ight-hand side of t
ight-hand side of t he v
he vehicle:
ehicle: turn
th e emer gency key clockwise as far as it will
go.
If th e loc ked door is then closed, it can no longer
be opened from the outside. Boot
Boot
Opening t
Opening t
he boo
he boot lid
t lid &
D
DAN
AN GER
GER Risk of exhaust gas poisoning
Combustion engines emit poisonous exhaust
ga ses such as carbon monoxide. Exhaust
ga ses can enter theve hicle interior if the boot
lid is open when theve hicle is running, espe-
cially if theve hicle is in motion. #
Always switch o. theve hicle before
opening the boot lid. #
Never drive with the boot lid open. *
N
NOOTE
TE Damage tothe boot lid byobstacles
abo vetheve hicle The boot lid swings upwards when it is
opened.
#
Therefore, make sure that there is su1-
cient clearance abo vethe boot lid. #
V Vehicles wit
ehicles wit h HANDS-FREE A
h HANDS-FREE A CCESS:
CCESS:make a
kicking mo vement with your foot below the
bumper (/ page 92). 90
90
Opening and closing

#
T
To r
o r emov
emov e:
e:turn co ver1 tothe leT and
re mo veit from the wheel ar chliner. #
T
To
o /t:
/t: insert co ver1 into the wheel ar chliner
and turn it totheright until it engages.
R
R eplacing light sour
eplacing light sour ces in t
ces in t he halog
he halog en headla mp
en headlamp
R
R eq
eq uir
uir ements:
ements:
R Lo
Low beam:
w beam: an H7 55 W light source is availa-
ble.
R High beam:
High beam: an H7 55 W light source is availa-
ble. 1
Low beam housing co ver
2 High beam housing co ver #
Switch the lighting system o.. #
Remo vethe co ver in the front wheel ar ch
( / page 140). #
Turn there leva nt housing co ver anti-clockwise
and remo veit. #
Turn the soc ket anti-clockwise and remo veit. #
Pull the light source out of the soc ket. #
Inse rtthe new light source into the soc ket
such that the entire base of the light source is
re sting on the bottom of the soc ket. #
Inse rtthe soc ket and turn it clockwise. #
Press on the housing co ver and turn it cloc k-
wise. #
Replace the co ver in the front wheel ar ch
( / page 140). Changing t
Changing t
he r
he rear bulbs (v
ear bulbs (v ehicles wit
ehicles with halog
h halogen
en
headlam
headlam ps)
ps) R R
eplacing t
eplacing t he t
he t ail lam
ail lam p bulbs
p bulbs #
Due totheir locations, ha vethe bulbs forthe
turn signal light and reve rsing light changed at
a qu ali/ed specialist workshop. W W
indscr
indscr een wiper
een wiper s and windscr
s and windscr een w
een washer sy
asher sy s-
s-
t
t em
em Switc
Switc
hing t
hing t he windscr
he windscr een wiper
een wipers
son/o.
on/o. 1
gWindsc reen wipers o.
2 Ä Automatic wiping, normal
3 Å Automatic wiping, frequent Light and sight
141
141

The
Tank is depressurised Ready for refuel-
ling messa geappears in the Instrument Dis-
pla y.
% Inthefo llowing situations there is a malfunc-
tion:
R indicator lamp 20ashes initially and then
goes out
R theye llow ; engine diagnosis warning
lamp lights up
The fuel tank can only be bled if the conditions
mentioned abo veare ful/lled. Otherwise, drive the
ve hicle at least 0.5 km and repeat the procedure.
% Opening the fuel /ller 0ap ma y,in exceptional
cases, take up to15 minutes. 1
Fuel /ller 0ap
2 Brac ketfo r fuel /ller cap
3 Tyre pressure table
4 QR code forre scue card
5 Fuel type #
Press on the back area of fuel /ller 0ap 1. #
Turn the fuel /ller cap anti-clockwise and
re mo veit. #
Insert fuel /ller cap from abo veinto brac ket
2 . #
Comple tely insert the pump nozzle into the
ta nk /ller nec k,hook in place and refuel. #
Only /ll the fuel tank until the pump nozzle
switches o..
% V Vehicles wit ehicles wit h a diesel engine:
h a diesel engine: theta nk /ller
neck is designed forre fuelling at diesel /lling
pumps.
% V
Vehicles wit
ehicles wit h a diesel engine:
h a diesel engine: whenthe fuel
ta nk is comple tely em pty, top up with at least
5 litres of diesel.
% V
Vehicles wit
ehicles wit h a diesel engine:
h a diesel engine: use a /ller neck
with a lar gediame terfo rve hicles with a diesel
engine when topping up fuel from a fuel can.
Otherwise, the /ller neck cannot slide into the
ta nk. #
Replace the cap on the /ller neck and turn
clockwise until it engages audibl y. #
Close fuel /ller 0ap 1. Driving and parking
185
185

re
maining distance displa yed has been driven.
To p up with at least 5 l of AdBlue ®
.
R XX,X l Top up AdBlue Emer. op.: max. XXX
km/h Start not poss. in XXX km The low
Ad Blue ®
leve l will lead tolimited per form ance
from the speed displa yed. ATer there maining
distance displa yed has been co vered, it will no
longer be possible tostart theve hicle. Top up
with at least the amount of AdBlue ®
displa yed.
R XX,X l Top up AdBlue Switch on ignition, wait
60 sec. or eng. start not poss. TheAdBlue ®
ta nk is em pty. Yo u can no longer start the
ve hicle. Top up with at least the amount of
Ad Blue ®
displa yed. Switch on theve hicle and
wa itfor appr oximately 60 seconds. Start the
ve hicle.
Yo u can see theAd Blue ®
range and le vel in the
Service menu in the Instrument Displa y.
% The AdBlue ®
range sh own depends strongly
on the driving style and operating conditions.
The actual range can therefore deviate from
th e calculated range. Opening t
Opening t he A he AdBlue
dBlue ®
®
/ller
/ller cap
cap #
Press on the back area of fuel /ller 0ap 1. #
Turn AdBlue ®
/ller cap 2anti-clockwise and
re mo veit.
% You can also store theAd Blue ®
/ller cap in
th e fuel /ller cap holder in the fuel /ller 0ap
hinge arm. T
T opping up A
opping up A dBlue
dBlue®
®
Mercedes-Benz recommends topping up AdBlue ®
at a /lling pump. If no AdBlue ®
/lling pump is
av ailable, you can also top up AdBlue ®
using a
canister. #
Screw onthefa stener of AdBlue ®
re/ll canis-
te r4. Driving and parking
187
187

&
W
WARNI NG
ARNI NGRisk of /re and injury from
engine oil
If engine oil comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Make sure that no engine oil is spilled
next tothe /ller opening. #
Allow the engine tocool o. and thor-
oughly clean the engine oil from compo-
nent parts before starting theve hicle. *
N
NOOTE
TE Engine damage caused byan inco r-
re ct oil /lter, incor rect oil or additi ves #
Do not use engine oils or oil /lters which
do not cor respond tothe speci/cations
ex plicitly prescribed forth e service inter-
va ls. #
Follow the inst ructions on the service
inter val display forch anging the engine
oil and obser vethe prescribed change
inter vals. #
Do not use additives. *
N
NOOTE
TE Damage caused bytopping up too
much engine oil To
o much engine oil can damage the engine or
th e catalytic con verter. #
Have excess engine oil remo ved at a
qu ali/ed specialist workshop. %
Depending on driving st yle, theve hicle con-
sumes up to0.8 litre of oil per 1000 km. The
oil consum ption may be higher than this when
th eve hicle is new or if you frequently drive at
high engine speeds. #
Turn cap 1anti-clockwise and remo veit. #
Top up the engine oil. #
Replace cap 1and turn it clockwise until it
engages. #
Check the oil le vel again (/ page 331). 332
332
Maintenance and care

Chec
Chec
king t
king t he coolant lev
he coolant lev el
el &
W
W ARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. &
W
W ARNING
ARNING Risk of scalding from hot cool-
ant
If yo u open the cap, you could be scalded. #
Let the mo tor cool down before opening
th e cap. #
When opening the cap, wear pr otective
glo ves and saf ety glasses. #
Open the cap slo wlytorelease pressure. #
Park theve hicle on a le vel sur face. #
Check the coolant temp erature display in the
inst rument cluster.
The coolant temp erature must be below 70°C. #
Slowly turn cap 1anti-clockwise torelease
ove rpressure. #
Continue turning cap 1anti-clockwise and
re mo veit. The coolant le
vel is cor rect in thefo llowing cases:
R Ifth e engine is cold, the coolant is up to
mar ker bar 2.
R Ifth e engine is warm,th e coolant is up to
1.5 cm overth e mar ker bar 2. #
If necessar y,top up with coolant that has
been appr ovedfo r Mercedes-Benz.
% Further information on coolant (/ page 395) T
T
opping up t
opping up t he windscr
he windscreen w
een washer syst
asher syst em
em &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. Maintenance and care
333
333

T
T
o
o wing ey
wing eye st
e st or
orag
ag e location
e location The
towing eye is located in the st owage space
under the boot 0oor. F
F
itting and r
itting and r emo
emoving t
ving t heto
he towing eye
wing eye #
Press the mark on co ver1 inwa rds and
re mo ve. #
Screw intheto wing eye clockwise as far as it
will go and tighten.
V
V ehicles wit
ehicles wit h a tr
h a trailer hitc
ailer hitc h:
h:vehicles with a trailer
hitch do not ha veare ar brac ketfo rth eto wing
ey e. Fasten theto w bar tothe trailer hitch. #
Make sure that co ver1 engages in the
bumper when youre mo vetheto wing eye.
* N
NO OTE
TE Damage totheve hicle due toincor-
re ct use of theto wing eye or trailer hitch When a
towing eye or trailer hitch is used to
re co ver a vehicle, theve hicle may be damaged
in the process. #
Only use theto wing eye or trailer hitch to
to w awa y or tow start theve hicle. #
Do not use theto wing eye or trailer hitch
to to wtheve hicle during reco very. T
T
o
o w
w -st
-st ar
arting t
ting t he v
he vehicle
ehicle V V
ehicles wit ehicles wit h aut
h automatic tr
omatic tr ansmission
ansmission
* NO
NOTE
TEDamage tothe automatic transmis-
sion due to tow-starting The au
tomatic transmission may be damaged
in the process of tow- starting vehicles with
automatic transmission. #
Vehicles with automatic transmission
must not be tow- star ted. #
Vehicles with an automatic transmission must
not be tow- star ted.
V V ehicles wit ehicles wit h manual tr
h manual tr ansmission
ansmission #
Obser vethe no tes on towing away
( / page 358). #
If necessar y,allow the engine and exhaust
system tocool down. #
Swit chon the ignition. #
Engage second gear. #
Release the electric parking brake. Breakdown assistance
361
361