2021 MERCEDES-BENZ CLA COUPE load capacity

*
N
N O
OTE
TE Damage tothe driv etra in and
engine when pulling away #
Do not warm upthe engine while the
ve hicle is stationar y.Pull away immedi-
atel y. #
Avoid high engine speeds and driving at
full thro ttle until the engine has reached
its operating temp erature. *
N
NO OTE
TE Damage tothe catalytic con verter
due tonon-combusted fuel The engine is not
running smoo thly and is mis-
/ring.
Non-combus ted fuel may getinto the catalytic
con verter. #
Only depress the accelerator pedal
slightl y. #
Have the cause recti/ed immediately at
a qu ali/ed specialist workshop. *
N NOOTE
TE Reduced battery life due tofrequent
short-distance trips The 12 V battery may not be su1cien
tly
ch arge d when theve hicle is used only for
short-dis tance trips. This reduces the life of
th e batter y. #
Drive longer distances regula rly to
ch arge the batter y. *
N
NO
OTE
TE Damage totheve hicle due tonot
observing the maximum permitted head-
ro om clearance If
th eve hicle height is greater than the maxi-
mum permitted headroom clearance, thero of
and other parts of theve hicle may be dam-
aged. #
Obser vethe signposted headroom clear-
ance. #
Ifth eve hicle height is greater than the
permitted headroom clearance, do not
enter. #
Obser vethech anged vehicle height with
add-on roof equipment. N No
ot
tes on dr
es on dr iving wit
iving with a r
h a roof load, tr
oof load, tr ailer or fully
ailer or fully
laden v
laden v ehicle
ehicle
When driving with a loaded roof luggage rack or
trailer as well as with a fully laden or fully occu-
pied vehicle, theve hicle's driving and steering
ch aracteristics change.
Yo u should bear thefo llowing in mind:
R Do not exceed the permissible roof load and
to wing capacity. Also obser vethete ch nical
data in the printed Owner's Manual.
R Evenly distribute thero of load, and place
heavy objects at the bottom. Also comply with
th e no tes on loading theve hicle
(/ page 118).
R Drive attentivel y,and avoid suddenly pulling
awa y,braking and steering as well as rapid
cornering.
Not
Not es on dr
es on dr iving on salt-tr
iving on salt-tr eat
eated r
ed r oads
oads
The braking e.ect is limited on salt-treated roads. Driving and parking
165
165

Do not
exceed thefo llowing values:
R Perm issible towing capacity
R Perm issible rear axle load of theto wing vehi-
cle
R Perm issible gross weight of theto wing vehicle
R Perm issible gross weight of the trailer
R Maximum permissible speed of the trailer
Ensure thefo llowing before starting a journe y:
R The tyre pressure on there ar axle of theto w-
ing vehicle is set for a maximum load
R The lighting of the connected trailer is opera-
tional
R V
V ehicles wit
ehicles wit hout LED headlam
hout LED headlam ps or MUL
ps or MULTI-
TI-
BEAM LED headlam
BEAM LED headlam ps:
ps:the headlamps ha ve
been set cor rectly
In theev ent of increased rear axle load, the car/
trailer combination must not exceed a maximum
speed of 100 km/h forre asons conce rning the
operating permit. This also applies in countries in
which the permissible maximum speed for car/
trailer combinations is abo ve100 km/h. F
F
olding t
olding t he ball nec
he ball nec k out and in
k out and in &
W
WARNING
ARNING Risk of accident due tothe ball
neck not being engaged
If th e ball neck is not engaged, the trailer may
come loose. #
Always engage the ball neck as descri-
bed. &
W
WARNING
ARNING Risk of injury from ball neck
swinging outwards
The ball neck may swing outwards when
unlocking or when it has not been proper ly
engaged.
There is a risk of injury within the ball neck's
ra nge of mo vement! #
Unlock the ball neck only when its range
of mo vement is unobstructed. #
Always be sure the ball neck is engaged
when folding in wards. *
N NOOTE
TE Increased risk of damage toprop-
erty due tofolded-out ball neck #
When the trailer is not coupled or the
bicycle rack is attached, fold in the ball
neck or, in the case of a fully electric
trailer hitch, retract the ball nec k. *
N
NO
OTE
TE Damage totheve hicle due toincor-
re ct use of the trailer hitch When a trailer hitch is used
toreco ver a vehi-
cle, theve hicle may be damaged in the proc-
ess. #
Use the trailer hitch only for pulling a
trailer or attaching appr oved car rier sys-
te ms (e.g. a bicycle rack ). R
R
eq
eq uir
uir ements:
ements:
R The vehicle is secured against rolling away.
R The swivel range is clear.
R The trailer cables or ada pter plugs ha vebeen
re mo ved. Driving and parking
265
265

U
U
ncoupling a tr
ncoupling a tr ailer
ailer &
W
WARNI NG
ARNI NGRisk of being crushed and
becoming trapped when uncoupling a
trailer
When uncoupling a trailer with an engaged
inertia-activated brake, your hand may
become trapped between theve hicle and the
trailer dr awbar. #
Do not uncouple trailers with an engaged
ove rrun brake. *
N
NOOTE
TE Damage during uncoupling with an
engaged overrun brake The
vehicle may be damaged if you uncouple
with an engaged overrun brake. #
Do not uncouple trailers with an engaged
ove rrun brake. #
Secure the trailer against rolling away. #
Disconnect the electrical connection between
th eve hicle and the trailer. #
Uncouple the trailer. #
Place the co ver cap on the ball head.
% T
Tr
railer
ailer s wit
s wit h LED lighting:
h LED lighting: aTer uncoupling the
traile r,switch theve hicle on and then o.
again. Bicy
Bicy
cle r
cle r ac
ack function
k function &
W
WARNING
ARNING Risk of an accident if the bicy-
cle rack is used incor rectly
The bicycle rack may become de tach ed from
th eve hicle in thefo llowing cases:
R the permissible load capacity of the trailer
hitch is exceeded.
R the bicycle rack is used incor rectl y.
R the bicycle rack is secured tothe ball neck
beneath the ball head.
Obser vethefo llowing foryo ur ow n sa fety and
th at of other road users:
R always adhere tothe permissible load
capacity of the trailer hitch. R
always obser vethe permissible rear axle
load of theto wing vehicle.
R use the bicycle rack only totransport bicy-
cles.
R always proper lysecure the bicycle rack by
attaching it tothe ball head.
R use only bicycle rack s appr ovedby
Mercedes-Benz.
R always obser vethe bicycle rack operating
instructions. *
N NOOTE TE Damage toor breakage of the trailer
hitch due tounsuitable or improper lyused
bicycle rack. #
Only use bicycle rack s appr ovedby
Mercedes-Benz prope rly as described
bel ow. *
N
NO
O TE
TE Increased risk of damage toprop-
erty due tofolded-out ball neck #
When the trailer is not coupled or the
bicycle rack is attached, fold in the ball 268
268
Driving and parking

neck or, in
the case of a fully electric
trailer hitch, retract the ball nec k. Depending on
the bicycle rack 's design, up to
th re e bicycles can be transpor ted on the bicycle
ra ck.
When mounted byattaching toball head 1,the
maximum load capacity is 75 kg. The maximum load capacity is calculated from
the
we ight of the bicycle rack and the bicycle rack
load.
Obser vethe no tes on driving with a roof load,
trailer or fully laden vehicle (/ page 163).
When using a bicycle rack , set the tyre pressure
fo r increased load on there ar axle of theve hicle.
Fu rther information on the tyre pressure can be
fo und in the tyre pressure table (/ page 367).
N
No ot tes on loading
es on loading
The lar gerth e distance between the load's centre
of grav ity and the ball head, thegr eater the load
on the trailer hitch.
Therefore, obser vethefo llowing no tes:
R mount heavy bicycles as close totheve hicle
as possible
R always distribute the load on the bicycle rack
as evenly as possible across theve hicle's lon-
gitudinal axis
Mercedes-Benz recommends removing all de tach-
able parts from bicycles (e.g. bask ets, ch ild seats,
re ch arge able batteries) before loading them onto
th e bicycle rack . This will impr ovethe aerody- namic
resis tance and centre of grav ity of the bicy-
cle rack.
Alw ays secure the bicycles toprev ent them from
moving around and check them at regular inter-
va ls to ensure that they are secure.
Do not use tarp aulins or other co vers. The driving
ch aracteristics and rear view may be impaired. In
addition, aerodynamic resis tance and the load on
th e trailer hitch will increase. Load distribution on
the bicycle rack
1 Vertical distance between centre of grav ity
and ball head Driving and parking
269
269

Fo
r tyres, pay attention tothefo llowing:
R Designation
R Manufacturer
R Type &
W
WARNING
ARNING Risk of inju rythro ugh exceed-
ing the speci/ed tyre load-bearing capa-
city or the permissible speed rating
Exceeding the load-bearing capacity of the
tyres can lead totyre damage and could cause
th e tyres toexplode. #
Therefore, only use tyre types and sizes
appr ovedfo ryo ur vehicle model. #
Obser vethe tyre load-bearing capacity
ra ting and speed rating requ ired foryo ur
ve hicle. *
N NOOTE
TE Vehicle and tyre damage caused by
non-appro ved tyre types and sizes Fo
r saf etyre asons, only use tyres, wheels and
accessories which ha vebeen specially
appr oved byMercedes-Benz foryo ur vehicle.
These tyres are special lyadap tedto the active
saf ety sy stems, su chas ABS, ESP ®
and
4MATIC, and mar ked as follo ws:
R MO = Mercedes-Benz Original
R MOE = Mercedes-Benz Original Ex tended
(run-0at tyres only for cer tain wheels)
R MO1 = Mercedes-Benz Original (only cer-
ta in AMG tyres)
Otherwise, cer tain properties, such as han-
dling characteristics, vehicle noise emissions,
consu mption, etc. could be adversely a.ec-
te d. Furthermore, other tyre sizes could result
in the tyres rubbing against the body and axle
components when loaded. This could result in
damage tothe tyre or theve hicle. Only use tyres, wheels and accessories
that
ha ve been checked and recommended by
Mercedes-Benz. *
N
NOOTE
TE Risk todriving saf ety from retrea-
ded tyres Re
treaded tyres are neither tested nor recom-
mended byMercedes-Benz, since pr evious
damage cannot alw ays be de tected on retrea-
ded tyres.
Fo rth is reason driving saf ety cann otbe guar-
anteed. #
Do not use used tyres if you ha veno
information about their pr evious usage. *
N NOOTE
TE Possible wheel and tyre damage
when driving over obstacles Lar
gewheels ha vea smaller section width. As
th e section width decreases, therisk of
wheels and tyres being damaged when driving
ov er obstacles increases. Wheels and tyres
371 371

Inter
changing the front and rear wheels if the
wheels or tyres ha vedi.erent dimensions can
re nder thege neral ope rating permit in valid.
The wear patterns on the front and rear wheels
di.er:
R front wheels wear more on the tyre shoulder
R rear wheels wear more in the centre of the
tyre
Do not drive with tyres that ha vetoo little tread
dep th. This signi/cantly reduces traction on wet
ro ads (aquaplaning).
On vehicles with the same front and rear wheel
size, you can inter change the wheels every
5,000 to10,000 km, depending on thewe ar.
Ensu rethe direction of rotation is maintained for
th e wheels.
Obser vethe inst ructions and saf ety no tes on
"Changing a wheel" when doing so (/ page 375). N
No
ot
tes on st
es on st or
oring wheels
ing wheels When storing wheels, obser
vethefo llowing no tes:
R ATer removing wheels, store them in a cool,
dry and preferably dark place.
R Protect the tyres from contact with oil, grease
or fuel. Ov
Ov
er
ervie
vie w of t
w of t he tyr
he tyr e-c
e-chang
hang e t
e tool kit
ool kit *
N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. Apart from some countr
y-speci/c variants, vehi-
cles are not equipped with a tyre-change tool kit.
Fo r more information on which tyre-changing
to ols are requ ired and appr ovedfo r per form ing a
wheel change on your vehicle, consult a quali/ed
specialist workshop.
Yo ure qu ire thefo llowing tools, forex ample, to
ch ange a wheel:
R Jack R
Chock
R Wheel wrench
R Centring pin
% The jack weighs appr oximately 3.4 kg.
The maximum load capacity of the jack can
be found on the stic ker a1xed tothe jac k.
The jack is maintenance-free. If there is a
malfunction, please contact a quali/ed spe-
cialist workshop.
The tyre-change tool kit is located in tool bag 1
in the boot.
% Depending on theve hicle equipment, theto ol
bag may be located at other positions in the
boot. 374
374
Wheels and tyres

The time
take nto charge the battery depends on
th ech arge status of the batter y,the ambient tem-
perature and thech arging capacity of the batter y.
The charging capacit y,in turn, depends on the
supply voltage, the cur rent intensity and the type
of po wer suppl y.
The nominal voltage range foryo ur vehicle can be
fo und on the information label in the soc ket 0ap
(/ page 188). T
T
r
railer hitch
ailer hitch Gener
Gener
al not
al notes on t
es on t he tr
he trailer hitch
ailer hitch Modi/cations
tothe engine cooling system may
be necessar y,depending on theve hicle model.
The retro/tting of a trailer hitch is on lypermissi-
ble if a towing capacity is speci/ed in your vehicle
documents.
Fu rther information can be obtained at a quali/ed
specialist workshop. Mounting dimensions of t Mounting dimensions of t
he tr
he trailer hitch
ailer hitch 1
Fastening points
2 Overhang dimension
3 Rear axle cent reline The
overhang dimension and fastening points are
va lid for a trailer hitch installed at thefa ctor y.
Ov Ov er erhang dimension leng th
hang dimension length Model Model
2 2Ov
Over
erhang dimension
hang dimension
All model s1 153 mm T
T
o
o wing capacity
wing capacity %
The tongue weight is not included in theto w-
ing capacity.
The values forth e trtrailer load, br ailer load, br ak
aked
ed apply
with a minimum start-o. gradeability of 12%.
No
No t f
t for plug-in h
or plug-in h ybr
ybrid:
id: Te
ch nical data
399
399

T
T
o
o wing capacity
wing capacity , br
, brak
aked
ed Model
Model
CLA 180
CLA 180 d
1400 kg
CLA 200 4MATIC
CLA 200 d 4MATIC
CLA 220 d 4MATIC
CLA 250 4MATIC 1800 kg
All other model s1 600 kgT T
o
o wing capacity
wing capacity , unbr
, unbrak
aked
ed Model
Model
CLA 180, manual
transmission
705 kg
CLA 180, automatic
transmission
CLA 200, manual
transmission 710 kg Model Model
CLA 200, automatic
transmission
715 kg
CLA 250 745 kg
All other model s7 50 kg T T
r
railer load, br
ailer load, br ak
aked (plug-in h
ed (plug-in h ybr
ybrid)
id) Model
Model
CLA 250
e1 600 kg T T
r
railer load, unbr
ailer load, unbr ak
aked (plug-in h
ed (plug-in h ybr
ybrid)
id) Model
Model
CLA 250
e7 50 kg Maximum t Maximum t
ongue w
ongue weight and load capacity
eight and load capacity *
N NOOTE
TE Damage caused bythe trailer com-
ing loose If
th eto ngue weight used is too lo w,the trailer
may come loose. #
The tongue weight must not be below
50 kg. #
Use a tongue weight that is as close as
possible tothe maximum permissible
to ngue weight. *
N
NOOTE
TE Damage caused bythe bicycle rack
coming loose When using a bicycle
rack , bo th th e maximal
to ngue weight and the maximal load capacity
should be obser ved. #
Do not exceed the permissible load
capacity. Obser
vethe additional no tes on load capacity
(/ page 268).
T
T ongue w
ongue w eight
eight Model Model
Maximum t
Maximum tongue
ongue
w
w eight
eight
All model s8 0 kg400 400
Te
ch nical data