2021 MERCEDES-BENZ B-CLASS HATCHBACK trailer

%
V
V ehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: the
automatic transmission may be loc ked in posi-
tion 005Dintheev ent of damage tothe electri-
cal system. ToshiT to005C , pr ovide the on-
board electrical system with po wer
( / page 363). #
V
Vehicles wit
ehicles wit h manual tr
h manual tr ansmission:
ansmission: shiTto
neutral. #
Load theve hicle onto the transpor ter. #
V
Vehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: shiTthe
automatic transmission toposition 005D. #
V
Vehicles wit
ehicles wit h manual tr
h manual tr ansmission:
ansmission: engage
/rst or reve rsege ar. #
Use the electric parking brake tosecure the
ve hicle against rolling away. #
Only secure theve hicle bythe wheels. V V
ehicles wit ehicles wit h adap
h adaptiv
tive dam
e dam ping adjus
ping adjustment tment &
W
WARNING
ARNING Risk of an accident when trans-
porting vehicles with adaptive damping
adjustment
When transpo rting vehicles with adaptive
damping adjustment, theve hicle/trailer com-
bination may begin torock and start toskid. #
Load theve hicle cor rectly onto the
transpor ter. #
Secure theve hicle on all four wheels
with suitable tensioning straps. #
Do not exceed the maximum permissible
speed of 60 km/h when transporting. *
N
NOOTE
TE Damage totheve hicle from secur-
ing it inco rrectly #
ATer loading, theve hicle must be
secured on all four wheels. Otherwise,
th eve hicle could be damaged. #
A minimum dis tance of 20 cm upwards
and 10 cm down wards must be kept to
th e transport platform. #
Secure theve hicle on all four wheels aTer
loading.
4MA
4MA TIC v
TIC v ehicles/v
ehicles/v ehicles wit
ehicles wit h aut
h automatic tr
omatic tr ans-
ans-
mission
mission #
Make sure that the front and rear axles come
to rest on the same transpor tation vehicle.
* N
NOOTE
TE Damage tothe drive train due to
incor rect positioning of theve hicle #
Do not position theve hicle abo vethe
connection point of the transport vehi-
cle. Breakdown assis
tance
369
369

T
T
o
o wing ey
wing eye st
e st or
orag
ag e location
e location The
towing eye is under the load compartment
0oor. F
F
itting and r
itting and r emo
emo ving t
ving t heto
he towing eye
wing eye #
Press the mark on co ver1 inwa rds and
re mo ve. #
Screw intheto wing eye clockwise as far as it
will go and tighten.
V
V ehicles wit
ehicles wit h a tr
h a trailer hitc
ailer hitc h:
h:vehicles with a trailer
hitch do not ha veare ar brac ketfo rth eto wing
ey e. Fasten theto w bar tothe trailer hitch. #
Make sure that co ver1 engages in the
bumper when youre mo vetheto wing eye.
* N
NOOTE
TE Damage totheve hicle due toincor-
re ct use of theto wing eye or trailer hitch When a
towing eye or trailer hitch is used to
re co ver a vehicle, theve hicle may be damaged
in the process. #
Only use theto wing eye or trailer hitch to
to w awa y or tow start theve hicle. #
Do not use theto wing eye or trailer hitch
to to wtheve hicle during reco very. T
T
o
o w
w -st
-st ar
arting t
ting t he v
he vehicle
ehicle V V
ehicles wit ehicles wit h aut
h automatic tr
omatic tr ansmission
ansmission
* NO
NOTE
TE Damage tothe automatic transmis-
sion due to tow-starting The au
tomatic transmission may be damaged
in the process of tow- starting vehicles with
automatic transmission. #
Vehicles with automatic transmission
must not be tow- star ted. #
Vehicles with an automatic transmission must
not be tow- star ted.
V V ehicles wit ehicles wit h manual tr
h manual tr ansmission
ansmission #
Obser vethe no tes on towing away
( / page 367). #
If necessar y,allow the engine and exhaust
system tocool down. #
Swit chon the ignition. #
Engage second gear. #
Release the electric parking brake. 370
370
Breakdown assistance

R
Tyre pressure monitor active :th ete ach-in
process of the system is not yetcomple te. The
tyre pressures are already being monitored. #
Compare the tyre pressure with there com-
mended tyre pressure forth e cur rent ope rat-
ing condition (/ page 376).Additionall y,
obser vethe no tes on cold tyres
(/ page 375).
% The values displa yed in the on-board com-
puter may deviate from those of the tyre pres-
sure gauge as they referto sea le vel.At high
ele vations, the tyre pressure values indicated
by a pressure gauge are higher than those
shown bythe on-board computer. In this case,
do not reduce the tyre pressure.
R
R est
est ar
arting t
ting t he tyr
he tyr e pr
e pressur
essur e monit
e monit or
oring syst
ing syst em
em
R
R eq
eq uir
uir ements:
ements:
R The recommended tyre pressure is cor rectly
set forth ere specti veoperating status on all of
th e wheels (/ page 375).
Re start the tyre pressure monitoring system in the
fo llowing situations:
R The tyre pressure has changed. R
The wheels or tyres ha vebeen changed or
ne wly /tted.
On-board computer: 4 Service 5
Tyres #
Swipe down wards on Touch Control on the
leT-hand side of the steering wheel.
The Use current pressures as new reference
values? message is shown in the Instrument
Displa y. #
Torestart, press Touch Control on the leT-
hand side of the steering wheel.
The Tyre press. monitor restarted message is
shown in the Instrument Displa y.
Cur rent wa rning message s are deleted and
th eye llow 0077 warning lamp goes out.
ATer you ha vebeen driving for a few minutes,
th e system checks whe ther the cur rent tyre
pressures are within the speci/ed range. The
cur rent tyre pressures are then accep ted as
re fere nce values and monitored.
Be sure toalso pay attention tothefo llowing rela-
te dto pic:
R Notes on tyre pressure (/ page 375) T
T
yr
yr e pr
e pr essur
essur e loss w
e loss w ar
arning syst
ning syst em
em F
F
unction of t
unction of t he tyr
he tyre pr
e pressur
essur e loss w
e loss w ar
arning syst
ning syst em
em
The tyre pressure loss warning system warnsthe
driver bymeans of display messages when there
is a se vere tyre pressure loss.
Syst
Syst em limits
em limits
The system may be impaired or may not function
particula rly in thefo llowing situations:
R incor rect refere nce values were ta ught in
R sudden pressure loss caused byafo re ign
object penetrating the tyre, forex ample
R aneven pressure loss on more than one tyre
occurs
The system has a restric ted or dela yed function
particular lyin thefo llowing situations:
R poor ground conditions, e.g. snow or grav el
R driving with snow chains
R when adopting a very sporty driving st yle with
high cornering speeds or sudden acceleration
R driving with a very heavy or lar getrailer
R driving with a high load 378
378
Wheels and tyres

B 250 e
B 250 e
Char
getime – mode 2
with 3.7 kW charging capacity App
rox. 3 h
15 min
Char getime – mode 2
with 2.3 kW charging capacity App
rox. 5 h
30 min
Char getime – mode 2
with 1.8 kW charging capacity App
rox. 7 h
30 min Charging times – modes 2 and 3 apply
toAC
ch arging from 10% to100% of the usable energy
content. Charging time – mode 4 applies toDC
ch arging from 10% to80% of the usable energy
content.
The time take nto charge the battery depends on
th ech arge status of the batter y,the ambient tem-
perature and thech arging capacity of the batter y.
The charging capacit y,in turn, depends on the
supply voltage, the cur rent intensity and the type
of po wer suppl y.
The nominal voltage range foryo ur vehicle can be
fo und on the information label in the soc ket co ver
( / page 198). T T
r
railer hitch
ailer hitch Gener
Gener
al not
al notes on t
es on t he tr
he trailer hitch
ailer hitch Modi/cations
tothe engine cooling system may
be necessar y,depending on theve hicle model.
The retro/tting of a trailer hitch is on lypermissi-
ble if a towing capacity is speci/ed in your vehicle
documents.
Fu rther information can be obtained at a quali/ed
specialist workshop. Mounting dimensions of t Mounting dimensions of t
he tr
he tr ailer hitch
ailer hitch 1
Fastening points
2 Overhang dimension
3 Rear axle cent reline 408
408
Te
ch nical data

The
overhang dimension and fastening points are
va lid for a trailer hitch installed at thefa ctor y.
Ov
Ov er
erhang dimension leng th
hang dimension length Model Model
2 2Ov
Over
erhang dimen-
hang dimen-
sion
sion
All model s8 88 mmT
T
o
o wing capacity
wing capacity %
The tongue weight is not included in theto w-
ing capacity.
The values forth e trtrailer load, br ailer load, br ak
aked
ed apply
with a minimum start-o. gradeability of 12%.
No
No t f
t for plug-in h
or plug-in h ybr
ybrid:
id: T
T
o
o wing capacity
wing capacity , br
, brak
aked
ed Model
Model
B 160
1300 kg
B 180, (manual and
automatic transmis-
sion)
B 180 d, (manual and
automatic transmis-
sion) 1400 kg
B 200 4MATIC
B 220 d 4MATIC
B 250 4MATIC 1800 kg
All other model s1 600 kg T T
o
o wing capacity
wing capacity , unbr
, unbrak
aked
ed Model
Model
B 160
B 180, manual trans-
mission
690 kg
B 180, automatic
transmission 700 kg
B 200, manual trans-
mission 695 kg
B 200, automatic
transmission 705 kg
B 200 4MATIC
B 250 745 kg
All other model s7 50 kg T T
r
railer load, br
ailer load, br ak
aked (plug-in h
ed (plug-in h ybr
ybrid)
id) Model
Model
B 250
e1 600 kg Te
ch nical data
409 409

T
T
r
railer load, unbr
ailer load, unbr ak
ak ed (plug-in h
ed (plug-in h ybr
ybrid)
id) Model
Model
B 250
e7 50 kgMaximum t Maximum t
ongue w
ongue weight and load capacity
eight and load capacity *
N
NOOTE
TE Damage caused bythe trailer com-
ing loose If
th eto ngue weight used is too lo w,the trailer
may come loose. #
The tongue weight must not be below
50 kg. #
Use a tongue weight that is as close as
possible tothe maximum permissible
to ngue weight. *
N
NOOTE
TE Damage caused bythe bicycle rack
coming loose When using a bicycle
rack , bo th th e maximal
to ngue weight and the maximal load capacity
should be obser ved. #
Do not exceed the permissible load
capacity. Obser
vethe additional no tes on load capacity
(/ page 277).
T
T ongue w
ongue w eight
eight Model
Model
Maximum t
Maximum tongue
ongue
w
w eight
eight
All model s8 0 kg Load capacity
Load capacity
All models
All models
Maximum load
Maximum load
When attaching the
bicycle rack tothe ball
head 75 kg
When attaching the
bicycle rack tothe ball
head and additionally
to the guide pin 100 kg P P
er
er missible r
missible r ear axle load (tr
ear axle load (tr ailer oper
ailer operation)
ation) N
No
ot f
t f or plug-in h
or plug-in h ybr
ybrid:
id:
Tr
Tr ailer oper
ailer oper ation axle load
ation axle load Model
Model
Axle load
Axle load
B 160 1040 kg
B 180 d, manual
transmission 1060 kg
B 180 d, automatic
transmission
B 200, manual trans-
mission 1055 kg
B 200 d, automatic
transmission 1070 kg
B 200 d, manual
transmission
B 220 d 1075 kg
B 200 4MATIC 1095 kg
B 250 4MATIC 1090 kg410 410
Te
ch nical data

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences and0050
0050Solutions
Solutions
:
Malfunction See Owner's
Manual *T
heexterior lighting is malfunctioning. #
Consult a quali/ed specialist workshop.
*V Vehicles wit ehicles wit h a tr
h a trailer hitc
ailer hitc h:
h:a fuse may ha veblown. #
Stop theve hicle in accordance with the tra1c conditions. #
Check the fuses and replace them if necessary (/ page 371).
:
Automatic driving lights
inoperative *T
he light sensor for automatic driving lights is malfunctioning. #
Consult a quali/ed specialist workshop.
:
Active Light System inoper-
ative *T
he active headlamps are malfunctioning. #
Consult a quali/ed specialist workshop. 420 420
Displ
aymessages and warning/indicator lamps

Hybr
Hybr
id syst
id syst em
em Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences and0050
0050Solutions
Solutions
u
Towing not permitted See
Owner's Manual *T
he drive system is malfunctioning. #
Have theve hicle transpo rted only using a transpor ter or trailer (/ page 366).
ò Acoustic presence indica-
tor inoperative *T
he sound generator (acoustic vehicle warning system) is malfunctioning. No driving noises are being produced. The
ve hicle may not be heard by otherroad users. #
Drive with particular care. #
Consult a quali/ed specialist workshop.
00E5
Charger cable connected *Y
ou cannot pull away while thech arging cable is connected. #
Disconnect thech arging cable from theve hicle.
Not possible to unlock
charging cable See Own-
er's Manual *T
hecharging cable connector cann otbe remo ved from thech arging station's soc ket. #
Press the EMERGENCY OFF switch on thech arging station.
If th ech arging cable connector cann otbe remo ved aTer that: 426 426
Displ
aymessages and warning/indicator lamps