ular
the data pr otection regulations, in your
countr y.
Fo rth is reason, before using the dashcam
inform yourself about there gulation de tails for
th ere specti vecount ry.
This function is not permitted in all countries. #
Obser vethe count ry-speci/c regula-
tions. Selecting a USB de
Selecting a USB de
vice f
vice for a video r
or a video r ecor
ecording with
ding with
t
t he dashcam
he dashcam R
R
eq
eq uir
uir ements:
ements:
R Atleast one USB device is connected with the
multimedia system .
Multimedia system: 4 © 5
Mercedes me & Apps
5 Dashcam #
Select the USB device.
% When USB devices contain multiple partitions,
re corded video /les are not alw ays displa yed
in there cording list. Mercedes-Benz
recommends that you use
USB devices with one partition. S
S
t
tar
ar ting or st
ting or st opping video r
opping video r ecor
ecording wit
ding wit h t
h the
he
dashcam
dashcam R
R
eq
eq uir
uir ements:
ements:
R A USB device is connected with the multime-
dia system .
R The vehicle is switched on.
Multimedia system: 4 © 5
Mercedes me & Apps
5 Dashcam #
If se veral USB devices are connected with the
multimedia system, select a USB device
(/ page 310). #
Select theIndividual recording orLoop
recording recording mode.
If Individual recording is selected andthe
memory is full there cording stops.
If Loop recording has been selected, se veral
short video /les are recorded. When the mem-
ory limit is reached, the oldest video /le is dele
ted and recording is continued automati-
call y. #
T
To st
o st art
art::select Start recording.
The length of there cording is shown. The
Please do not remove the storage medium.
message appears. The video /le is stored on
th e USB device. #
T To end:
o end: selectEnd recording .
A report may appear in thefo llowing cases:
R Forth eIndividual recording recording mode:
th e memory is full or there are only a few
minutes recording time available. The video
re cording stops or will be stopped imminent ly.
Change the USB device or dele tea video /le.
R If a video recording has star ted and a national
border is de tected, theNational border
crossed. Please observe the countryspecific
regulations regarding video recording. mes-
sage appears.
This function is not available in all countries.
R The camera is not functional, theCamera
unavailable message appears. 310 310
MBUX multimedia system
Ha
ve the camera checked in a Mercedes-Benz
service centre. T
T
elephone
elephone T
T
elephony
elephony N
No
ot
tes on t
es on t elephony
elephony &
W
WARNING
ARNING Risk of dist raction from operat-
ing integ rated communication equipment
while theve hicle is in motion
If yo u operate communication equipment inte-
gr ated in theve hicle when driving, you could
be distracted from the tra1c situation. This
could also cause youto lose control of the
ve hicle. #
Only operate this equipment when the
tra1c situation pe rmits. #
Ifyo u cannot be sure of this, stop the
ve hicle whilst paying attention toroad
and tra1c conditions and operate the
equipment with theve hicle stationar y. &
W
WARNI NG
ARNI NGRisk of an accident from oper-
ating mobile communication equipment
while theve hicle is in motion
Mobile communications devices distract the
driver from the tra1c situation. This could also
cause the driver tolose control of theve hicle. #
Asthe driver, only operate mobile com-
munications devices when theve hicle is
stationar y. #
As a vehicle occupant, only use mobile
communications devices in the areas
intended forth is purpose, e.g. in there ar
passen ger compartment. Yo
u must obser vethe legal requ irements forthe
count ryin which you are cur rently driving when
ope rating mobile communication equipment in
th eve hicle. &
W WARNING
ARNING Risk of injury due toobjects
being st owed incor rectly
If objects in theve hicle interior are st owed
incor rectl y,they can slide or be thro wn around and hit
vehicle occupants. In addition, cup
holders, open st owage spaces and mobile
phone recep tacles cann otalw aysreta in all
objects within.
There is a risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change
in direction. #
Always st owobjects so that they cann ot
be thro wn around in such situations. #
Always make sure that objects do not
pr otru de from st owage spaces, lug gage
nets or st owage nets. #
Close the loc kable st owage spaces
before starting a jou rney. #
Always st owand secure heavy, hard,
poin ted, sharp-edged, fragile or bulky
objects in the boot/load compartment. Obser
vethe additional information on st owing
mobile communications devices cor rectl y:
R Loading theve hicle (/ page 118)
R Stow ing and securing the mobile phone
(/ page 135) MBUX multimedia system
311 311
-
Calling stored telephone numbers
- Deleting
R Noting calls
- Declining incoming calls and saving as a
task in theTasks & calls menu
R Marking entry in Tasks & callsas completed
0073 R
Managing e-mails
- Showing/reading e-mails
- Writing and forw arding e-mails
% You can start the In-Car O1ce function using
th eMercedes me & Apps menu. Please note
th at cer tain functions are only available when
th eve hicle is stationar y. W W
eb br ow
eb br owser ov
ser overerview
view The
web br owser is star ted using theMercedes
me & Apps menu. 1
URL entry
2 Bookmar ks 3
Web page, back
4 Web page, forw ards 5
Torefresh/stop
6 Options MBUX multimedia system
321
321
A
A
dditional functions of T
dditional functions of T uneIn r
uneIn r adio
adio
% Arelatively lar gevolume of data can be trans-
mitted when using TuneIn Radio. Symbol
Symbol
DesignationF
Designation Function
unction
Z SettingsThefollowing additional settings are available in
th eTu neIn Radio menu:
R Selecting stream
R Logging on toor out of theTu neIn account
ß Favourites Select during playbacktosave the station cur-
re ntly set as a favo urite.
6/8 Play/PauseSelecttostart, stop or continue pl aybac k.
5 Brow se Selecttochoose a category and then a radio sta-
tion. Depending on
the frequency band selected, di.er-
ent functions are available toyou.
Select the desired frequency band in thera dio
menu head runner. Calling up T
Calling up T
uneIn R
uneIn Radio
adio R R
eq
eq uir
uir ements:
ements:
R A Mercedes me account is available. R
The vehicle is connected with the Mercedes
me account.
R The TuneIn Radio service is activated in the
Mercedes me Portal.
R The data volume is available. 334 334
MBUX multimedia system
ASS
YS
ASS YST PL
T PL US ser
US ser vice int
vice int erv
erval display
al display F
F
unction of t
unction of t he ASSYS
he AS SYST PL
T PL US ser
US ser vice int
vice int erv
erval dis-
al dis-
play
play The ASS
YST PLUS service inter val display on the
inst rument display informs you of the time or dis-
ta nce remaining before the next service due date.
Yo u can hide this service display using the back
button Gonthe leT-hand side of the steering
wheel.
Depending on how theve hicle is used, the
ASS YST PLUS service inter val display may shor ten
th e service inter val, e.g. in thefo llowing cases:
R Mainly short-distance driving
R When the engine is oTen leT idling for long
periods
R Intheev ent of frequent cold start phases
R V
V ehicles wit ehicles wit h a diesel par
h a diesel par ticulat
ticulate
e/lt
/lt er:
er: inthe
ev ent of frequently inter rupted rege neration of
th e diesel particulate /lter
Mercedes-Benz recommends avoiding such oper-
ating conditions. Yo
u can obtain information concerning the servic-
ing of your vehicle from a quali/ed specialist
wo rkshop, e.g. a Mercedes-Benz service cent re. Displa
Displa
ying t
ying t he ser
he ser vice due date
vice due date On-board computer:
4 Service 5
ASSYST PLUS
The next service due date is displa yed. #
T
T o e
o e xit t
xit t he displa y:
he displ ay:press the back button
G onthe leT-hand side of the steering
wheel.
Bear in mind thefo llowing related topic:
R Operating the on-board computer
(/ page 282). Inf
Inf
or
ormation on r
mation on r egular maint
egular maint enance w
enance work
ork *
N
NOOTE
TE Premature wearthro ugh failure to
obser veservice due dates Main
tenance workwhich is not car ried out at
th eright time or inco mplete ly can lead to
increased wear and damage totheve hicle. #
Adhere tothe prescribed service inter-
va ls. #
Always ha vethe prescribed maintenance
wo rkcar ried out at a quali/ed specialist
wo rkshop. N
No
ot
tes on special ser
es on special ser vice r
vice req
equir
uir ements
ements The prescribed service inter
val is based on nor-
mal operation of theve hicle. Ha vethe mainte-
nance workcar ried out more oTen than prescri-
bed if operating conditions are di1cult or the
ve hicle is subject toincreased stress.
The ASS YST PLUS service inter val display is only
an aid. The driver of theve hicle bears responsibil-
ity as rega rdsto whe ther maintenance work
needs tobe per form ed more oTen than speci/ed
based on the actual operating conditions and/or
loads.
Examples of arduous operating conditions:
R Regular city driving with frequent intermediate
stops
R Mainly short-distance driving 336 336
Maintenance and care
R
The air conditioning system is set toair-recir-
culation mode.
R Parking Assist PARKTRONIC is deactivated.
R V
V ehicles wit
ehicles wit h 360° Camer
h 360° Camer a:
a:the front image is
activated aTer appr ox. eight seconds.
If one of the settings cannot be selected, this is
displa yedby a% behind there specti veset-
ting.
Ab ove a speed of 20 km/h Car wash mode is
automatically deacti vated.
The following settings are reset when car wash
mode is deacti vated:
R The outside mir rors are folded out.
R The rain sensor is activated.
R The rear wind owwiper is activated.
R The air conditioning system is set tofresh air
mode.
R Parking Assist PARKTRONIC is reset tothe
pr ev iously selected setting.
R The windo wsand the sliding sunroof remain
closed. R
V
V ehicles wit ehicles wit h 360° Camer
h 360° Camer a:
a:the front image is
deactivated at speeds abo ve18 km/h. A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating aut
ating automatic car w
omatic car w ash mode
ash mode R
R
eq
eq uir
uir ements:
ements:
R theve hicle is stationar y.
R the engine is running.
Multimedia system: 4 © 5
Settings 5
Quick access
A
A ctiv
ctiv ating aut
ating aut omatic car w
omatic car w ash mode
ash mode #
Select Car wash mode . #
Select Start.
If one of the settings cannot be selected, this is
displa yedby a% behind there specti veset-
ting.
% For an overview of the settings made when
activating automatic car wash mode
(/ page 343). Deactiv Deactiv
ating aut
ating aut omatic car w
omatic car w ash mode
ash mode #
Select Stop.
The automatic car wash settings are reset.
% The automatic car wash mode is automatically
deacti vated as soon as a speed of 20 km/h is
ex ceeded. Inf
Inf
or
ormation on using a high-pr
mation on using a high-pr essur
essure cleaner
e cleaner &
W WARNING ARNING Risk of an accident when using
high-pressure cleane rswith round-spr ay
nozzles
The water jet can cause extern ally invisible
damage.
Components damaged in this wa y may un ex-
pectedly fail. #
Do not use a high-pressure cleaner with
round-spr aynozzles. #
Have damaged tyres or chassis parts
re placed immediatel y. Maintenance and ca
re
345 345
#
Tow- start theve hicle while the clutch pedal is
fully depressed. #
Slowly re leasethe clutch pedal. #
Immediately shiT toneutral if the engine
starts. #
Stop theve hicle in accordance with the tra1c
conditions. #
Remo vetheto w bar. #
Remo vetheto wing eye. #
Have theve hicle checked at a quali/ed spe-
cialist workshop. Electr
Electr
ical fuses
ical fuses N
No
ot
tes on electr
es on electr ical fuses
ical fuses &
W
WARNING
ARNING Risk of accident and injury due
to ove rloaded lines
If yo u manipulate or bridge a faulty fuse or if
yo ure place it with a fuse with a higher amper-
age, the electric line could be overloaded.
This could result in a /re. #
Alwaysre place faulty fuses with speci-
/ed new fuses containing the cor rect
amperage. *
N
NOOTE
TE Damage due toincor rect fuses Electrical components or systems may be
damaged
byincor rect fuses, or their function-
ality may be signi/cantly impaired. #
Only use fuses that ha vebeen appr oved
by Mercedes-Benz and which ha vethe
cor rect fuse rating. Blown fuses must be
replaced with fuses of the
same rating, whi chyou can recognise bythe col-
our and the label. The fuse ratings and fur ther
information tobe obser ved can be found in the
fuse assignment dia gram.
F F use assignment diagr
use assignment diagr am:
am:onthe fuse box in the
engine compartment (/ page 372). *
N
NOOTE
TE Damage or malfunctions caused by
moisture Moisture may cause damage
tothe electrical
system or cause it tomalfunction. #
When the fuse box is open, make sure
th at no moisture can enter the fuse box. #
When closing the fuse box, make sure
th at the seal of the lid is positioned cor-
re ctly on the fuse box. If
th e ne wlyinser ted fuse also blo ws, ha vethe
cause traced and recti/ed at a quali/ed specialist
wo rkshop.
Ensure thefo llowing before replacing a fuse:
R The vehicle is secured against rolling away.
R All electrical consume rsare switched o..
R The vehicle is switched o..
The elect rical fuses are located in various fuse
bo xes:
R Fuse box in the engine compartment on the
leT-hand side of theve hicle, when vie wed in
th e direction of tr avel (/ page 372) Breakdown assistance
371
371
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences and0050
0050Solutions
Solutions
Á
Key not detected (white dis-
play message) *T
hekey is cur rently unde tected. #
Change the location of theke y in theve hicle. #
Ifth eke y is still not recognised, place it in the slot for starting with theke y (/ page 170).
Á Key not detected (red dis-
play message) *T
hekey cann otbe de tected and may no longer be in theve hicle.
The key is no lon ger in theve hicle and you switch o. theve hicle:
R You can no longer start theve hicle.
R You cannot centrally lock theve hicle. #
Ensu rethat theke y is in theve hicle.
If th eke y de tection function has a malfunction due toa st rong radio signal source: #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Place theke y in the slot for starting the engine with theke y (/ page 170).
Á Key being initialised Please
wait *T
hevehicle is processing in order to teach in the new key. #
Wait until processing is comple te.418 418
Display message
s andwarning/indicator lamps