2021 MERCEDES-BENZ B-CLASS HATCHBACK lights

Ad
aptive Highbeam Assist Plus automatically
switches between thefo llowing types of light:
R Low beam
R Partial high beam
R High beam
Pa rtial high beam uses the high beam toshine
past other road users rather than dazzling them. The
vehicle in front will be illuminated bythe low
beam.
At speeds greater than 30 km/h:
R If no other road users are de tected, the high
beam will switch on automaticall y.
R Ifot her road users are de tected, the partial
high beam will switch on automaticall y.
At speeds below 25 km/h or when there is su1-
cient street lighting:
R The high beam will switch o. automaticall y.
R The partial high beam will switch o. automati-
cally.
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc
Switc hing A hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist Plus t Pluson/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch tothe0058 position. #
Switch on the high beam using the combina-
tion switch.
When the high beam is switched on automati-
cally in the dar k, the00CE indicator lamp will
light up on the central display section of the
inst rument displa y.
Switc
Switc hing hingo.
o. #
Switch o. the high beam using the combina-
tion switch. Se
Se
tting t
tting t he e
he ext
xter
er ior lighting
ior lighting switc
switch-o.
h-o. dela
dela y time
y time R
R
eq
eq uir
uir ements:
ements:
R The light switch is in the0058 position.
Multimedia system: 4 © 5
Settings 5
Lights
5 Ext. light. del. sw. off #
Set the swit ch-o. delay time.
When theve hicle engine is switched o., the
ex terior lighting will be activated forth e set
time. Light and sight
145
145

Switc
Switc
hing t
hing t he surr
he surr ound lighting
ound lighting on/o.
on/o. Multimedia system:
4 © 5
Settings 5
Lights
5 Surround lighting
When Surround lighting is active,theex terior
lighting lights up for 40 seconds aTer theve hicle
is unloc ked. When you start theve hicle, the sur-
ro und lighting is deactivated and the automatic
driving lights are activated. #
Activate or deactivate the function. Int
Int
er
er ior lighting
ior lighting A
A
djus
djus ting t
ting t he int
he int er
erior lighting
ior lighting F
F
r
ront ov
ont overerhead contr
head contr ol panel
ol panel 1
003D Front leT reading lamp
2 0033 Automatic interior lighting control
3 004A Front interior lighting
4 0042 Rear interior lighting
5 003D Front right reading lamp #
T
T o switc
o switc h
hon/o.:
on/o.: press but ton1 –5
accordingl y. Contr
Contr
ol panel in t
ol panel in t hegr
he grab handle
ab handle 1
003D Rear reading lamp #
T
To switc
o switc h
hon/o.:
on/o.: press but ton1. A
A
djus
djusting t ting t he ambient lighting
he ambient lighting Multimedia system:
4 © 5
Comfort 5
Ambient lighting
Se
Se tting t
tting t he colour
he colour #
Select Colour. #
Set the desired colour. 146
146
Light and sight

A
A
djus
djus ting t
ting t he br
he br ightness
ightness #
Select Brightness. #
Adjust the brightness.
A
A ctiv
ctiv ating t
ating t he br
he brightness f
ightness f or zones
or zones #
Select Brightness. #
Select Brightness zones. #
Switch the function on or o..
or #
Set the brightness forth e desired zones.
A
A ctiv
ctiv ating multi-colour
ating multi-colour ed lighting
ed lighting #
Select Colour. #
Select Multi-colour. #
Select a colour combination.
A
A ctiv
ctiv ating multi-colour
ating multi-colour ed animation
ed animation #
Select Colour. #
Select Multi-colour animat..
The chosen colour combination will change at
prede/ned inter vals. A
A ctiv
ctiv ating w
ating w elcome lighting
elcome lighting #
Select Colour. #
Select Welcome.
When theve hicle is unloc ked, a special ambi-
ent lighting sequence will run.
A
A ctiv
ctiv ating dependency on air conditioning se
ating dependency on air conditioning se t-
t-
tings
tings #
Select Colour. #
Select Climate .
If ch anges are made tothete mp erature set-
ting in theve hicle, the colour of the ambient
lighting will change brie0y. Switc
Switc
hing t
hing t he int
he inter
erior lighting
ior lighting switc
switch-o.
h-o. delay
delay
time
time on/o.
on/o. Multimedia system:
4 © 5
Settings 5
Lights
5 Int. light. del. sw. off #
Switch the swit ch-o. delay time on or o..
When this function is active, the interior light-
ing lights up for a short time aTer theve hicle
is loc ked. Changing bulbs (onl
Changing bulbs (onl
y f
y for v
or v ehicles wit
ehicles wit h halog
h halogen
en
headlam
headlam ps)
ps) N
No
ot
tes on c
es on c hanging bulbs
hanging bulbs &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts whilst replacing a bulb
Bulbs, lamps and plugs can become very hot
during operation.
When replacing a bulb, you could burn your-
self on these component parts. #
Allow the component parts tocool down
before replacing the bulb. R
Do not use a bulb if it has been dropped or if
its glass has been scratched. The bulb may
otherwise explode.
R Do not touch the glass bulb with your bare
hands.
R Protect bulbs from moisture and do not allow
bulbs tocome into contact with liquids. Light and sight
147 147

#
Neverto uch damaged components of
th e high-voltage on-board electrical sys-
te m. #
ATer an accident, do not touch any com-
ponents of the high-voltage on-board
electrical system. #
ATer an accident, ha vetheve hicle trans-
por tedawa y. #
Have the components of the high-voltage
on-board electrical system checked at a
qu ali/ed specialist workshop and
re placed if necessar y.R
R
eq
eq uir
uir ements:
ements:
Only disconnect the high-voltage on-board electri-
cal system manually in thefo llowing situations:
R The 0075 restraint system warning lamp lights
up in the Instrument Displa y,e.g. aTer an
accident.
R The vehicle is badly damaged, e.g. aTer an
accident, and there straint system co mpo-
nents ha venot been triggered. T
T
o oper
o oper at
ate t
e t he high-v
he high-v olt
oltag
age disconnect de
e disconnect de vice
vice #
Switch o. theve hicle. #
ShiT the transmission toposition 005D. #
Apply the electric parking brake. #
Secure theve hicle against rolling away (see
th eve hicle Owner's Manual). #
Open the bonnet. #
Press release tab1 inthe direction of the
ar ro w and pull it out. #
Pull high- voltage disconnect device 2inthe
direction of the ar row until it engages.
The high- voltage on-board electrical system is
switched o..
All workon thehy brid drive system (including
aTer disconnecting the high-voltage on-board
electrical system manually) may only be car ried
out byaqu ali/ed specialist workshop. Switc
Switc
hing on t
hing on t he pow
he power suppl
er suppl y or t
y or the v
he vehicle
ehicle &
W
WARNING
ARNING Risk of accident and injury due
to leaving children unattended in theve hi-
cle
If ch ildren are leT unattended in theve hicle,
th ey could, in particular:
R open doors, thereby endangering other
persons or road users.
R get out and be struck byoncoming tra1c. 168
168
Driving and parking

*
N
NO
OTE
TE Damage tothe fuel system due to
ove r/lling the fuel tank #
Only /ll the fuel tank until the pump noz-
zle switches o..
If to o much fuel has been added due, for
ex ample, toafa ulty /lling pump: #
Do not switch on theve hicle. #
Consult a quali/ed specialist workshop. *
N
NOOTE
TE Fuel may spr ayout when you
re mo vethe fuel pump nozzle #
Only /ll the fuel tank until the pump noz-
zle switches o.. R
R
eq
eq uir
uir ements:
ements:
R The vehicle is unloc ked.
R Plug-in h
Plug-in h ybr
ybrid:
id:the fuel tank was depressurised
by pulling the button before theve hicle was
re fuelled. This function is countr y-dependent. %
Do not getinto theve hicle again during the
re fuelling process. Othe rwise, electrostatic
ch arge could build up again.
Obser vethe no tes on operating 0uids and fuel.
The recommended octane number foryo ur vehi-
cle can be found on the information label in the
fuel /ller 0ap.
Depr
Depr essur
essur ising t
ising t he fuel t
he fuel t ank (plug-in h
ank (plug-in h ybr
ybrid)
id) #
Pull but ton1.
Indica tor lamp 20ashes and thePlease
wait Depressurising tank message appears in
th e Instrument Displa y.
When the fuel tank is dep ressurised, indicator
lamp 2lights up continuousl y.
The Tank is depressurised Ready for refuel-
ling messa geappears in the Instrument Dis-
pla y.
% Inthefo llowing situations there is a malfunc-
tion:
R indicator lamp 20ashes initially and then
goes out
R theye llow 00B9 engine diagnosis warning
lamp lights up
The fuel tank can only be bled if the conditions
mentioned abo veare ful/lled. Otherwise, drive the
ve hicle at least 0.5 km and repeat the procedure.
% Opening the fuel /ller 0ap ma y,in exceptional
cases, take up to15 minutes. 194
194
Driving and parking

1
Supply voltage indicator
2 Charging process indicator
3 Temp erature monitor indicator
4 Safety sy stem indicator
Suppl
Suppl y v
y v olt
oltag
age indicat
e indicat or
or1
1 Display
Display
Meaning
Meaning
Lights up whit eThe supplyvoltage is
connected. Char
Char
ging pr
ging pr ocess indicat
ocess indicat or
or2
2 Display
Display
Meaning
Meaning
Flashes green The high-voltage bat-
tery isch arging. T T
em
em per per atur
atur e contr
e contr ol indicat
ol indicat or
or3
3 Displ
ay
Display Meaning
Meaning
Lights up redT hegreen LED 0ashes
simultaneousl y:ove r-
te mp erature – the
ch arging per form ance
is reduced.
The green LED does
not 0ash: overtemper-
ature – thech arging
process is stopped.
Flashes redO vertemperature at
th e mains plug – the
ch arging process is
stopped. Safe
Safe
ty syst
ty syst em indicat
em indicat or
or4
4 Displ
ay
Display Meaning
Meaning
Flashes redC harging cable mal-
function – cann ot
car ryout thech arging
process, reset the
ch arging cable operat-
ing unit.
Lights up redW hite LED is o.:
po we r supply malfunc-
tion – cannot car ry
out thech arging proc-
ess, replace the mains
soc ket.
White LED is on: vehi-
cle malfunction – can-
not car ryout the
ch arging process,
re set thech arging
cable operating unit. When all
four displa yslight up, thech arging cable
operating unit per form s a self-test. 204 204
Driving and parking

If
te mp erature monitor 3indicates a malfunc-
tion, it may help toprotect thech arging cable
from direct sunlight.
T T o r
o r ese
ese t t
t the c
he c har
harging cable oper
ging cable oper ating unit:
ating unit:if
saf ety sy stem 4indicates a charging cable mal-
function or a vehicle malfunction, /rst reset the
ch arging cable operating unit. Todo this, discon-
nect thech arging cable from theve hicle and from
th e mains soc ket and waitfor appr oximately /ve
seconds. If the malfunction persists aTer the
ch arging cable is reconnected, charging at the
mains soc ket is not possible. The charging cable
must be replaced or theve hicle plug must be
ch ecked at a quali/ed specialist workshop,
depending on the indicator. F
F
unctions of t
unctions of t he indicat
he indicator lam
or lamps on t
ps on t he v
he vehicle
ehicle
soc ket
soc ket %
Depending on the national version, your vehi-
cle is equipped with one of thefo llowing vehi-
cle soc kets.
The soc ket 0ap is centrally loc ked and unloc ked
to get her with theve hicle. Combo 1
vehicle soc ket
1 Socket lamp
2 Charging process indicator lamp
3 Locking status indicator lamp Combo 2
vehicle soc ket
1 Socket lamp
2 Charging process indicator lamp
3 Locking status indicator lamp
Soc ket lamp 10ashes or lights up as with indi-
cator lamps 2and 3. Driving and parking
205
205

Ov
Ov
er
ervie
vie w of t
w of t he loc
he loc king st
king st atus
atus Loc
Loc
king st
king st a-
a-
tus
tus 3
3 Display
Display Meaning
Meaning
0036 Lights up
whiteVe
hicle
soc ket
unloc ked,
insert or
re mo vecharg-
ing cable
0036 Flashes whiteMalfunction
during locking
or unlocking Ov Ov
er
ervie
vie w of t
w of t he c
he char
harging pr
ging pr ocess st
ocess st atus
atus S
S
t
tatus of t
atus of t he
he
c
c har
har ging
ging
pr
pr ocess
ocess 2
2 Displ
ay
Display Meaning
Meaning
003D Flashes
orangeConnection is
being estab-
lished
003D Flashesgreen Active energy
0ow S S
t
tatus of t
atus of t he
he
c
c har
har ging
ging
pr
pr ocess
ocess 2
2 Display
Display
Meaning
Meaning
003D Lights up
orangeInter
ruption in
ch arging
003D Lights up
green Charging
process com-
ple
ted
003D Flashesred
(for appr ox.
90 s) Ve
hicle mal-
function;
ch arging is
not possible S S
t
tar
ar ting t
ting t he alt
he alt er
ernating curr
nating curr ent c
ent c har
harging pr
ging pr ocess
ocess
(mode 2/3)
(mode 2/3) &
D
DAN
AN GER
GER Risk of death when charging at a
damaged soc ket
The charging process uses high voltage. If
th ech arging cable, theve hicle soc ket or the
mains soc ket are damaged, you could receive
an elect ric shoc k. #
Only use an undamaged charging cable. #
Avoid mechanical damage such as crush-
ing, abrading or driving overth e cable. #
Have a damaged vehicle soc ketre placed
at a quali/ed specialist workshop as
soon as possible. #
Never connect thech arging cable to a
damaged vehicle soc ket. *
N
NOOTE
TE Damage due toove rheating of
ch arging cable and charging cable con-
nector During
thech arging process, thech arging
cable and charging cable connector can heat
up within their permissible limit values. 206
206
Driving and parking