2021 MERCEDES-BENZ B-CLASS HATCHBACK brake

R
Only /t wheels of the same size on one axle
(leT and right).
It is only permissible to/t a di.e rent wheel
size in theev ent of a 0at tyre in order todrive
to the specialist workshop.
R Do not make any modi/cations tothe brake
system, the wheels or the tyres.
The use of shims or brake dust shields is not
permitted and may in validate theve hicle's
ge neral ope rating permit.
R V
Vehicles wit
ehicles wit h a tyr
h a tyre pr
e pressur
essur e monit
e monit or
oring sy
ing sy s-
s-
t
t em:
em: all /t tedwheels must be equipped with
functioning sensors forth e tyre pressure mon-
itoring system.
R Attemp eratures below 7 °C use winter tyres
or all-season tyres mar ked004D M+Sfor all
wheels.
Wi nter tyres pr ovide the best possible grip in
wintry road conditions.
R For M+S tyres, only use tyres with the same
tread.
R Obser vethe maximum permissible speed for
th e M+S tyres /t ted. If
th e tyre's maximum speed is below that of
th eve hicle, this must be indicated byan
appropriate label in the driver's /eld of vision.
R Run in new tyres at moderate speeds forthe
/r st 100 km.
R Replace the tyres aTer six years at the latest,
re ga rdless of wear.
R When r
When r eplacing wit eplacing wit h tyr
h tyres t
es that do no
hat do no t f
t featur
eatur e
e
r
r un-0at
un-0at c
char
har act
act er
er is
istics:
tics: vehicles with
MOExtended tyres are not equipped with a
TIREFIT kit at thefa ctor y.Equip theve hicle
with a TIREFIT kit aTer replacing with tyres
th at do not feature run-0at characteristics,
e.g. winter tyres.
% You can permanently limit the maximum
speed for driving with winter tyres
(/ page 235).
Fo r more information on wheels and tyres, con-
ta ct a quali/ed specialist workshop.
Be sure toalso obser vethefo llowing fur ther rela-
te d subjects:
R Notes on tyre pressure (/ page 375)
R Tyre pressure table (/ page 376) R
Notes on the emer gency spa rewheel
(/ page 389) N
No
ot
tes on int
es on int erc
erchanging wheels
hanging wheels &
W
WARNING
ARNING Risk of injury thro ugh di.erent
wheel sizes
Inter changing the front and rear wheels can
se verely impair the driving characteristics.
The disk brakes or wheel suspension compo-
nents may also be damaged. #
Only inter change the front and rear
wheels if the wheels and tyres ha vethe
same dimensions. Inter
changing the front and rear wheels if the
wheels or tyres ha vedi.erent dimensions can
re nder thege neral ope rating permit in valid.
The wear patterns on the front and rear wheels
di.er:
R front wheels wear more on the tyre shoulder
R rear wheels wear more in the centre of the
tyre 382
382
Wheels and tyres

R
The vehicle is on solid, non-slippery and le vel
gr ound.
R The requ ired tyre-change tool kit is available.
% Ifyo ur vehicle is not equipped with the tyre-
ch ange tool kit, consult a quali/ed specialist
wo rkshop to/nd out about sui table tools. #
Apply the electric parking brake manuall y.#
Movethe front wheels tothe straight-ahead
position. #
V
Vehicles wit
ehicles wit h manual tr
h manual tr ansmission:
ansmission: engage
/rst or reve rsege ar. #
V
Vehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: shiTto
position 005D. #
Switch o. theve hicle. #
Make sure that theve hicle cann otbe star ted. #
Place choc ks orother suitable items under the
front and rear of the wheel that is diagonal ly
opposite the wheel you wish tochange. #
If necessar y,remo vethe wheel trim/hub caps
(/ page 384). #
Raise theve hicle (/ page 384). R
R
emo
emo ving and
ving and /tting
/ttingt
the wheel tr
he wheel tr im/hub caps
im/hub caps R
R
eq
eq uir
uir ements:
ements:
R The vehicle is prepared for a wheel change
(/ page 383).
Wheel tr
Wheel tr im
im
The wheel trim co vers the wheel bolts on vehicles
with steel wheels. Before unscr ewing the wheel
bolts, remo vethe wheel trim. #
T
T o r
o r emov
emov e:
e: using bo thhands, carefully reach
into two wheel trim openings and remo vethe
wheel trim. Plas Plas
tic hub cap tic hub cap #
T
To r
o r emov
emov e:
e:turn the centre co ver of the hub
cap anti-clockwise and remo vethe hub cap. #
T
To
o /t:
/t: make sure that the centre co ver of the
hub cap is turned anti-clockwise. #
Position the hub cap and turn the centre co ver
clockwise until the hub cap engages ph ysically
and audibl y. R
R
aising t
aising t he v
he vehicle when c
ehicle when c hanging a wheel
hanging a wheel R R
eq eq uir
uir ements:
ements:
R There are no persons in theve hicle.
R The vehicle has been prepared for a wheel
ch ange (/ page 383).
R The wheel trims and hub caps ha vebeen
re mo ved (/ page 384).
Impor tant no tes on using the jack:
R Use only a vehicle-speci/c jack that has been
appr ovedby Mercedes-Benz toraise theve hi-
cle.
R The jack is only designed forra ising and hold-
ing theve hicle for a short time while a wheel 384
384
Wheels and tyres

is being
changed and not for maintenance
wo rkunder theve hicle.
R The jack must be placed on a /rm, 0at and
non-slip sur face. If necessar y,use a lar ge, 0at,
load-bearing, non-slip underla y.
R The foot ofthe jack must be positioned verti-
cally under the jack support point. Ru
les of conduct when theve hicle is raised:
R Never place your hands or feet under theve hi-
cle.
R Never lie under theve hicle.
R Do not start theve hicle and do not release the
electric parking brake.
R Do not open or close any doors or theta ilgate. #
Using the wheel wrench, loosen the wheel
bolts on the wheel you wish tochange by
about one full turn. Do not unscr ewthe
scr ews comple tely. Wheels and tyres
385 385

#
Turn ratchet 3clockwise until support 2
sits comple tely on jack support point 1and
th e base of the jack lies evenly on thegr ound. #
Turn ratchet 3until the tyre is raised a maxi-
mum of 3 cm from thegr ound. #
Loosen and remo vethe wheel (/ page 387). R
R
emo
emo ving a wheel
ving a wheel R
R
eq
eq uir
uir ements:
ements:
R The vehicle is raised (/ page 384).
When changing a wheel, avoid applying any force
to the brake disks, as this could impair the le vel of
comfort when braking.
* NO
NOTE
TEDamage tothre ading from dirt on
wheel bolts #
Do not place wheel bolts in sand or on a
dirty sur face. #
Unscr ewthe uppermost wheel bolt com-
ple tely. #
Screw cent ring pin 1into theth re ad ins tead
of the wheel bolt. #
Unscr ewthere maining wheel bolts com-
ple tely. #
Remo vethe wheel and, if necessar y,store it in
th e load compartment. #
Notes on removing an emer gency spa rewheel
(/ page 389). F
F
itting a ne
itting a ne w wheel
w wheel R R
eq
eq uir
uir ements:
ements:
R The wheel tobe changed is remo ved and the
cent ring pin is sc rewe d in (/ page 387). &
W WARNING
ARNING Risk of accident from losing a
wheel
Oiled, greased or damaged wheel bolt/wheel
nut thre ads or wheel hub/wheel mounting
bolt thre ads can cause the wheel bolts/wheel
nuts tocome loose.
As a result, you could lose a wheel while driv-
ing. #
Never oil or grease theth re ads. #
Intheev ent of damage totheth re ads,
contact a quali/ed specialist workshop
immediatel y. #
Have the damaged wheel bolts or dam-
aged hub thre ads replaced. #
Do not continue driving. #
Obser vethe information on thech oice of tyres
(/ page 379).
Fo r tyres with a speci/ed direction of rotation, an
ar ro w on the side wall of the tyre indicates the
cor rect direction of rotation. Obser vethe direc-
tion of rotation when /tting. Wheels and tyres
387
387

VIN and engine number
VIN and engine number
1
Engine number stamped into the crankcase
2 VIN (vehicle identi/cation number) stamped
into the crossmember
3 VIN (vehicle identi/cation number) as a label
at the lo wer edge of the windscreen
Onl
Onl y f y for cert
or cert ain countr
ain countr ies:
ies:the VIN as a label at
th e lo wer edge of windscreen 3is only available
in some countries. Further information can be
obtained at a quali/ed specialist workshop. Oper
Oper
ating
ating 0uids
0uids N
No
ot
tes on oper
es on oper ating
ating0uids
0uids &
W
WARNING
ARNING Risk of injury from operating
0uids harmful toyour health
Operating 0uids may be poisonous and harm-
ful toyour health. #
Obser vethete xt on the original contain-
ers when using, storing or disposing of
operating 0uids. #
Always store operating 0uids sealed in
th eir original containers. #
Alwayske ep children away from operat-
ing 0uids. +
ENVIR ENVIR
ONMENT
ONMENT AL NO
AL NOTE
TEPollution of the
environment due toirre sponsible disposal
of operating 0uids Incor
rect disposal of operating 0uids can
cause considerable damage tothe environ-
ment. #
Dispose of operating 0uids in an environ-
mentally responsible manner. Operating 0uids include
thefo llowing:
R fuels
R DeNOx agent AdBlue ®
forex haust gas aTer-
treatment
R lubricants
R coolant
R brake 0uid
R windscreen washer 0uid
R climate cont rol system refrigerant
Only use products appro vedby Mercedes-Benz.
Damage caused bythe use of products that ha ve
not been app rove d is not co veredby the
Mercedes-Benz warranty or goodwill gestu res.
The operating 0uids appr ovedby Mercedes-Benz
can be identi/ed bythefo llowing inscriptions on
th e container:
R MB-F reigabe (e.g. MB-F reigabe 229.51)
R MB-Appr oval (e.g. MB -Appr oval 229.51) 396 396
Te
ch nical data

Engine oil
Engine oil
/lling
/llingcapacity
capacity Model
Model
Capacity
Capacity
B 160
B 180, (manual and
automatic transmis-
sion)
B 200, (manual and
automatic transmis-
sion)
B 200 4MATIC 5.1 litres
B 250
B 250 4MATIC 5.5 litres
All other model s6 .8 litres The speci/e
d/lling capacity refers to an oil
ch ange with the oil /lter. Engine oil Engine oil
speci/cation
speci/cation (plug-in h
(plug-in hybr
ybrid)
id) Model
Model
MB-Fr
MB-Freig
eigabe or MB-
abe or MB-
Appr ov
Approv al
al
B 250 e2 29.51, 229.52,
229.61, 229.71*, 229.72 *
re commended forth e lo west possible fuel con-
su mp tion
To achie vethe lo west possible fuel consum ption,
it is recommended touse the engine oil speci/ca-
tions mar ked in theta ble forth e lo westSA E vis-
cosity class. Obser veany possible restrictions of
th e appr ovedSA E viscosity classes.
% Ifth e engine oils listed in theta ble are not
av ailable, you may add a maximum of 1.0 litre
of engine oils with MB-F reigabe or MB-
Appr oval 229.31 or ACEA C3 once onl y.
Engine oil capacity (plug-in h
Engine oil capacity (plug-in h ybr
ybrid)
id) Model
Model
Capacity
Capacity
B 250 e4 .5 litres The speci/e
d/lling capacity refers to an oil
ch ange with the oil /lter. N
No
ot
tes on br
es on br ak
ake
e0uid
0uid No
tethe inst ructions about operating 0uids
(/ page 396). &
W
WARNING
ARNING Risk of an accident due to
va pour poc kets form ing in the brake sys-
tem
The brake 0uid constantly absorbs moisture
from the air. This lo wersthe boiling point of
th e brake 0uid. If the boiling point is too lo w,
va pour poc kets may form inthe brake system
when the brakes are applied hard.
This impairs the braking e.ect. #
Have the brake 0uid rene we d at the
speci/ed inter vals. Ha
ve the brake 0uid regula rly re placed at a quali-
/ed specialist workshop.
Only use a brake 0uid appr ovedby Mercedes-
Benz according toMB-F reigabe or MB-Appr oval
331.0. Te
ch nical data
403 403

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences and0050
0050Solutions
Solutions
Drive system Malfunction
Visit workshop *T
he drive system is malfunctioning. #
Consult a quali/ed specialist workshop.
Drive system Malfunction
Stop Switch engine off *T
he drive system is malfunctioning. #
Stop theve hicle immediately in accordance with the tra1c conditions and switch o. the engine. #
Consult a quali/ed specialist workshop. T T
r
ransmission
ansmission Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences and0050
0050Solutions
Solutions
Only select Park (P) when
vehicle is stationary *I
t is possible toselect the park position 005Donly if theve hicle is stationar y. #
Depress the brake pedal tostop. #
ShiT the transmission topark position 005Dwhen theve hicle is stationar y.
Apply brake to deselect
Park (P) position *Y
ou ha veattem pted toshiT the transmission out of park position 005Dand into ano ther transmission position. #
Depress the brake pedal. #
Select transmission position 005B,005Eor neutral 005C.
To shift out of P or N,
depress brake and start
engine *Y
ou ha veattem pted toshiT the transmission out of park position 005Dor neutral 005Cand into ano ther transmission posi-
tion. #
Depress the brake pedal. Display messages and
warning/indicator lamps
441
441

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences and0050
0050Solutions
Solutions #
Start theve hicle. #
Change the transmission position.
Apply brake to select D or R *You ha veattem pted toselect transmission position 005Bor005E. #
Depress the brake pedal. #
Select transmission position 005Bor005E.
Apply brake to select R *You ha veattem pted toselect transmission position 005E. #
Depress the brake pedal. #
Select transmission position 005E.
Risk of vehicle rolling
Driver door open and trans-
mission not in P *T
he driver's door is not fully closed and transmission position 005B,005Eor neutral 005Cis selected.
The vehicle may rollawa y. #
Select pa rkposition 005Dwhen switching o. theve hicle.
N permanently active Risk
of vehicle rolling *W
hiletheve hicle is rolling or while you are driving, neutral 005Chas been engaged. #
Depress the brake pedal tostop. #
ShiT the transmission topark position 005Dwhen theve hicle is stationar y. #
Tocontinue driving, select transmission position 005Bor005E.
Without changing gear,
consult workshop *T
he transmission is malfunctioning. It is no lon ger possible tochange the transmission position. 442 442
Display messages and
warning/indicator lamps