2021 MERCEDES-BENZ AMG GT COUPE reset

&
W
W ARNI NG
ARNI NGRisk of accident due toobjects
in the driver's foot we ll
Objects in the driver's foot we ll may impede
pedal tr avel or block a depressed pedal.
This jeopardises the operating and road saf ety
of theve hicle. #
Stow all objects in theve hicle securely
so that they cannot getinto the driver's
fo ot we ll. #
Always /t the 0oor mats securely and as
prescribed in order toensure that there
is alw ays su1cient room forth e pedals. #
Do not use loose 0oor mats and do not
place 0oor mats on top of one ano ther. *
N
NO OTE
TE Battery discharging from using devi-
ces connected tothe diagnostics connec-
tion Using devices at
the diagnostics connection
drains the batter y. #
Check thech arge leve l of the batter y. #
Ifth ech arge leve l is lo w,charge the bat-
te ry, e.g. bydriving a considerable dis-
ta nce. Please also no
tethe information about the 12 V
battery and short-dis tance trips in the "Driving
and Parking" chap ter (/ page 170). Connecting and using ano
ther device with the
diagnostics connection can ha vethefo llowing
e.ects:
R Malfunctions in theve hicle system
R Perm anent damage tovehicle components
Please referto thewa rranty term s and conditions
fo rth is matter.
Moreo ver,connecting equipment tothe diagnos-
tics connection can lead toemissions monitoring
information being reset, forex ample. This may
lead totheve hicle failing tomeet there qu ire-
ments of the next emissions inspection during the
main inspection. Quali/ed
Quali/ed
specialis
specialist w
t work
ork shop
shop
A qu ali/ed specialist workshop has the necessary
special skills, tools and quali/cations tocor rectly
car ryout any necessary workon your vehicle.
This particular lyapplies tosaf ety-re leva nt wo rks.
Alw ays ha vethefo llowing workcar ried out on
yo ur vehicle at a quali/ed specialist workshop:
R Safety-re leva nt wo rks General no
tes
39
39

ing state, component loads, maintenance
requ ire-
ments and tech nical events or faults.
Depending on theve hicle equipment, thefo llo w-
ing data are stored:
R operating status of system components, such
as /ll le vels, tyre pressure or battery status
R malfunctions or faults in impor tant system
components, such as lights or brakes
R system reactions in special driving situations,
such as airbag depl oyment or the inter vention
of stability cont rol systems
R information on events leading tovehicle dam-
age
In cer tain cases, it may be requ ired tostore da ta
th at wo uld ha veotherwise been used only temp o-
rari ly. This may be the case if theve hicle has
de tected a malfunction, forex ample.
If yo u use services, such as repair services and
maintenance work, stored operational data as
we ll as theve hicle identi/cation number can be
re ad out and used. They can be read out by
service network emplo yees, such as workshops
and manu facturers or third parties, such as break- down services. The same is true in
the case of
wa rranty claims and quality assurance measures.
In general, there adout is per form ed via the legally
prescribed port forth e diagnostics connection in
th eve hicle. The operational data that are read out
document tech nical states of theve hicle or of
individual components and assist in the diagnosis
of malfunctions, compliance with warranty obli ga-
tions and quality impr ovement. Tothat end, these
data, in particular information about component
loads, tech nical events, malfunctions and other
fa ults may be transmitted along with theve hicle
identi/cation number tothe manufacturer. Fur-
th ermore, the manufacturer is subject toproduct
liability. Forth is reason the manufacturer also
uses operational data from theve hicle, forex am-
ple, forre calls. These data can also be used to
ex amine the customer's warranty and guarantee
claims.
Fa ult memories in theve hicle can be reset by a
service outl etor at your requ est as part of repair
or maintenance work. Conv
Conv enience and inf ot
enience and inf otainment functions ainment functions
Yo u can store con venience settings and individual
settings in theve hicle and change or reset them
at any time.
Depending on theve hicle equipment, this
includes thefo llowing settings, forex ample:
R seat and steering wheel positions
R suspension and climate cont rolsettings
R individual settings, such as interior lighting
Depending on the selected equipment, you can
import data into vehicle inf otainment functions
yo urself.
Depending on theve hicle equipment, this
includes thefo llowing data, forex ample:
R multimedia data, such as music, /lms or pho-
tosfo r playback in an integ rated multimedia
system
R address book data for use in connection with
an integ rated hands-free system or an integ ra-
te d navigation system
R entered navigation destinations
R data about the use of Internet services General no
tes
43 43

1
Closing
2 Toopen
The buttons on the driver's door take precedence. #
T
To st
o st ar
art aut
t aut omatic oper
omatic oper ation:
ation:presstheW
button be yond the point of resis tance or pull
and release it. #
T
To int
o int err
errup
upt aut
t aut omatic oper
omatic oper ation:
ation:press or pull
th eW button again. When
theve hicle is switched o., you can con-
tinue tooperate the side windo ws.
This function is available for around four minutes
or until a front door is opened.
A A ut ut omatic rev
omatic rever
ersing function of t
sing function of t he side windows
he side wind ows
If an obs tacle impedes a side window during the
closing process, the side window will open again
automaticall y.The automatic reve rsing function is
only an aid and is not a substitute foryo ur atten-
tiveness. #
During the closing process, make sure that no
body parts are in the closing area. &
W
WARNING
ARNING Risk of becoming trapped
despite there being reve rsing pr otection
on the side window
The reve rsing function does not react:
R tosoT, light and thin objects, e.g. /n gers.
R during resetting.
The reve rsing function cannot pr event some-
one from becoming trapped in these situa-
tions. #
During the closing process, make sure
th at no body parts are in the closing
area. #
If someone becomes trapped, press the
W button toopen the side window
again. A
A
ut
ut omatic function of t
omatic function of t he side windows
he side wind ows In
thefo llowing cases, the side windo wswill be
closed automatically when theve hicle is switched
o.:
R if it starts torain
Ra in is de tected byara in sensor on the wind-
screen.
R inextreme temp eratures
R aTer a cer tain time (depending on the on-
board electrical system voltage)
R ifth ere is a malfunction in the po wer supply
The side windo wswill be closed as far as theve n-
tilation position. Opening and closing
95
95

#
Check whe ther the sliding sunroof can be
ra ised or opened when a roof luggage rack is
/t ted. #
T
To st
o st ar
art aut
t aut omatic oper
omatic oper ation:
ation:pressthe3
button be yond the point of resis tance or pull
and release it. #
T
To int
o int err
errup
upt aut
t aut omatic oper
omatic oper ation:
ation:brie0y press
th e3 button in any direction.
The opening/closing process will be stopped.
A
A ut
ut omatic rev
omatic rever
ersing function of t
sing function of t he sliding sun-
he sliding sun-
r
r oof
oof
If an obstacle obstructs the sliding sunroof during
th e closing process, the sliding sunroof will open
again automaticall y.The automatic reve rsing func-
tion is only an aid and is not a substitute foryo ur
attentiveness. #
During the closing process, make sure that no
body parts are in the closing area. &
W
WARNING
ARNING Risk of becoming trapped
despite there ve rsing function being active
In particular, there ve rsing function does not
re act:
R tosoT, light and thin objects, e.g. /n gers.
R towa rdsth e end of the closing procedure.
R during resetting. #
During the closing process, make sure
th at no body parts are in the closing
area. #
Release the button immediately if some-
body becomes trapped.
or #
Brie0y press the button in any direction
during automatic operation.
The closing process will be stopped. A A
ut
ut omatic functions of t
omatic functions of t he sliding sunr
he sliding sunr oof
oof The sliding sunroof will be closed automatically
when
theve hicle has been switched o. in thefo l-
lowing situations:
R if it starts torain
Ra in is de tected byara in sensor on the wind-
screen.
R inextreme temp eratures
R aTer a cer tain time (depending on the on-
board electrical system voltage)
R ifth ere is a malfunction in the po wer supply
The sliding sunroof will rise at there ar in order to
continue ventilating theve hicle interior.
If th e sliding sunroof is obstructed during an auto-
matic closing procedure, thero of will be opened
again slightl y.The automatic function forth e slid-
ing sunroof and the side windo wswill then be
deactivated. Opening and closing
99 99

R
R
ectifying pr
ectifying pr oblems wit
oblems with t
h the sliding sunr
he sliding sunr oof
oof &
W
WARNING
ARNING Risk of becoming trapped or
fata l injuries when the sliding sunroof is
closed again
If th e sliding sunroof is closed again immedi-
ately aTer it has been bloc ked or reset, it will
close with increased forc e. #
Make sure that no parts of the body are
in the closing area. #
Release the button immediately if some-
body becomes trapped.
or #
Brie0y press the button in any direction
during the automatic closing process.
The closing process will be stopped. The sliding sunr
The sliding sunr
oof canno
oof cannot be closed and y
t be closed and y ou can-
ou can-
no
no t see t
t see t he cause.
he cause.
% The term "sliding sunroof" also refers to the
panoramic roof.
If th e sliding sunroof is obstructed during closing
and reopens again slightl y: #
Immediately aTer automatic reve rsing, pull
and hold the3 button down again tothe
point of resis tance until the sliding sunroof is
closed.
The sliding sunroof will be closed with
increased forc e.
If th e sliding sunroof is obstructed again and
opens again slightl y: #
Repeat the pr evious step.
The sliding sunroof will be closed with even
gr eater forc e.
V V ehicles wit
ehicles wit hout a panor
hout a panor amic r
amic roof: t
oof: the sliding
he sliding
sunr
sunr oof is no
oof is no t oper
t operating smoot
ating smoot hly
hly.
. #
Reset the sliding sunroof.
R
R ese
ese tting t
tting t he sliding sunr
he sliding sunr oof
oof #
Push the3 button up tothe point of resist-
ance repeatedly until the sliding sunroof is
fully open. #
Press the3 button for ano ther second. #
Close the sliding sunroof.
V
V ehicles wit
ehicles wit h a panor
h a panoramic r
amic roof: t
oof: the r
he roller sun-
oller sun-
blind does no
blind does no t oper
t operat
ate smoot
e smoot hly
hly.
. #
Reset thero ller sunblind.
R
R ese
ese tting t
tting t he r
he roller sunblind
oller sunblind #
Pull and hold the3 button little bylittle
until thero ller sunblind is fully closed. #
Use automatic operation tofully open and
th en close thero ller sunblind. Sun blind and r
Sun blind and r
oller sunblind
oller sunblind F
F
olding up or do
olding up or do wn t
wn the sun blind f
he sun blind f or t
or the r
he r ear win-
ear win-
dow
dow #
Foldthe sun blind up or down. 100
100
Opening and closing

Se
Se
tting t
tting t he easy entr
he easy entr y and e
y and exit f
xit feature
eature Multimedia system:
4 © 5
Settings 5
Vehicle
5 Automatic seat adjustment
5 Easy Entry/Exit #
Activate or deactivate the function. Memor
Memor
y function
y function F
F
unction of t
unction of t he memor
he memory function
y function &
W
WARNING
ARNING Risk of an accident if the mem-
ory function is used while driving
If yo u use the memory function on the driver's
side while driving, you could lose control of
th eve hicle as a result of the adjustments
being made. #
Only use the memory function on the
driver's side when theve hicle is station-
ar y. &
W
WARNI NG
ARNI NGRisk of entrapment when
adjusting the seat with the memory func-
tion
When the memory function adjusts the seat,
yo u and other vehicle occupants – particular ly
ch ildren – could become trapped. #
During the adjustment process of the
memory function, make sure that no one
has any body parts in the sweep of the
seat. #
If someone becomes trapped, press a
preset position button or seat adjust-
ment switch immediatel y. &
W WARNI NG
ARNI NGRisk of entrapment if the mem-
ory function is activated bychildren
Children could become trapped if they acti-
va te the memory function, particular lywhen
unat tended. #
Never lea vechildren unattended in the
ve hicle. #
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. Yo
u can use the memory function when theve hi-
cle is switched o..
Seat adjustments for up tothre e people can be
stored and called up using the memory function.
Yo u can sa vesettings forth efo llowing systems:
R Seat, backrest and head restraint
R Steering wheel
R Outside mir rors
R Head-up display Seats and st
owing
117 117

Oper
Oper
ating t
ating t he memor
he memor y function
y function S S
t tor
or ing
ing #
Set the desired position for all systems. #
Brie0y press theV memory button and
th en press preset position button 4,T
or U within thre e seconds.
An acoustic signal sounds. The settings are
stored. #
T
T o call up: o call up: press or brie0y hold preset position
button 4,TorU.
ATer releasing the button, all systems are
mo ved into the stored position. S
S
t
to
o w
w ag
ag e ar
e ar eas
eas N
No
ot
tes on loading t
es on loading t he v
he vehicle
ehicle &
D
DAN
AN GER
GER Risk of poisoning from exhaust
ga ses
Combustion engines emit poisonous exhaust
ga ses, such as carbon monoxide. Exhaust
ga ses can enter theve hicle interior if theta il-
ga te is open when the engine is running, espe-
cially if theve hicle is in motion. #
Always switch o. the engine before
opening theta ilgate. #
Never drive with theta ilgate open. &
W
WARNING
ARNING Risk of injury from unsecured
items in theve hicle
If objects, lug gage or loads are not secured or
not secured su1cient ly,they could slip, tip
ov er or be thro wn around and thereby hit vehi-
cle occupants.
There is a risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change
in direction. #
Always st owobjects in such a wayth at
th ey cannot be thro wn around. #
Before the journe y,secure objects, lug-
ga ge or loads against slipping or tipping
ove r. &
W WARNI NG
ARNI NGRisk of injury due toobjects
being st owed incor rectly
If objects in theve hicle interior are st owed
incor rectl y,they can slide or be thro wn around
and hit vehicle occupants. In addition, cup
holders, open st owage spaces and mobile
phone brac kets cannot alw aysreta in all
objects they contain. 118
118
Seats and st
owing

#
If necessar y,fully insert the head restraints in
th ere ar seat backrest. #
T
To f
o f old t
old t he
heleT
leT and r
and r ight seat bac
ight seat bac kr
kres
es ts
ts
f
f orw
orw ar
ard:
d: pull right or leT release handle 1. #
V
Vehicles wit
ehicles wit h a centr
h a centre seat bac
e seat bac kr
krest:
est: pull
re lease catch 3of seat backrest 2forw ard. #
Fold seat backrest 2forw ards. #
If necessar y,reset the driver's or front
passenger seat.
F
F olding bac
olding bac k t
k the r
he r ear seat bac
ear seat bac kr
krest
est &
W
WARNING
ARNING Risk of becoming trapped when
adjusting the seats
When you adjust a seat, you may trap yourself
or a vehicle occupant. #
When adjusting a seat, make sure that
no one has any body parts in the sweep
of the seat. *
N
NOOTE
TE Damage caused bytrapping the
seat belt when folding back the seat bac k-
re st The seat belt could become trapped and
thus
be damaged when the seat backrest is folded
bac k. #
Make sure that the seat belt is not trap-
ped when folding back the seat backrest. #
Movethe driver's or front passenger seat for-
wa rds, if necessar y. #
Foldthe cor responding seat backrest 1back
until it engages.
LeT LeT and r
and r ight seat bac
ight seat bac kr
kres
es ts:
ts: ifth e seat bac k-
re st is not engaged and lo cked in place, this
will be shown on the multifunction display on
th e inst rument cluster.
A wa rning tone will also sound.
V
V ehicles wit
ehicles wit h a centr
h a centre seat bac
e seat bac kr
krest:
est: ifthe
seat backrest is not engaged and loc ked in Seats and st
owing
123
123