2021 MERCEDES-BENZ AMG GT COUPE warning

#
Always close the load compartment 0oor
before a journe y.#
Open the load compartment 0oor . #
Attach the holders 1inthe desired position
to the side of the load compartment 0oor. #
Close the load compartment 0oor. #
Insert the mounting elements 2into the
holders 1. #
Extend thete lescopic rod3. #
Insert thete lescopic rod3 into the mounting
elements 2. #
Turn both mounting elements 2to& until
yo ufe el them engage. A
A
tt
tt ac
ac hing a r
hing a r oof lugg
oof lugg ag
age r
e r ack
ack &
W
WARNING
ARNING Risk of accident due toexceed-
ing the maximum roof load
The vehicle cent reofgrav ity and the usual
driving characteristics as well as the steering
and braking characteristics alter.
If yo uex ceed the maximum roof load, the driv-
ing characteristics, as well as steering and
braking, will be greatly impaired. #
Neverex ceed the maximum roof load
and adjust your driving style. Yo
u will /nd information on the maximum roof
load in the "Technical data" section.
* N
NOOTE
TE Damage totheve hicle due tonot
observing the maximum permitted head-
ro om clearance If
th eve hicle height is greater than the maxi-
mum permitted headroom clearance, thero of
and other parts of theve hicle may be dam-
aged. 126
126
Seats and st
owing

#
Open soc ket 0ap 3. #
Inse rtthe plug of the device into 230 V soc ket
1 .
When the on-board electrical system voltage is
su1cient, indicator lamp 2lights up. USB por
USB por
t in t
t in the r
he rear passeng
ear passeng er com
er compar
partment
tment Depending on
theve hicle equipment, theve hicle
has thefo llowing USB ports in there ar passen ger
compartment:
R forve hicles with luxury individual rear seats: in
th ere ar cent reconsole
R forve hicles with a rear ben chseat: between
th ere ar seats
R inthe st owage compartment in there ar arm-
re st
% Depending on theve hicle equipment, the
design of the st owage compartment and the
re ar cent reconsole may vary.
When theve hicle is switched on, you can charge a
USB device, such as a mobile phone, at the USB
port using a suitable charging cable. W
W
ir
ireless c
eless c har
harging of t
ging of t he mobile phone and con-
he mobile phone and con-
nection wit
nection wit h t
h the e
he e xt
xter
er ior aer
ior aer ial
ial N
No
ot
tes on wir
es on wir elessl
elessly c
y char
har ging t
ging t he mobile phone
he mobile phone &
W
WARNING
ARNING Risk of injury due toobjects
being st owed incor rectly
If objects in theve hicle interior are st owed
incor rectl y,they can slide or be thro wn around
and hit vehicle occupants. In addition, cup
holders, open st owage spaces and mobile
phone recep tacles cannot alw aysreta in all
objects within.
There is a risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change
in direction. #
Always st owobjects so that they cann ot
be thro wn around in such situations. #
Always make sure that objects do not
pr otru de from st owage spaces, lug gage
nets or st owage nets. #
Close the loc kable st owage spaces
before starting a jou rney. 130 130
Seats and st
owing

#
Fasten the mobile phone behind rubber strap
1.
When the indicator lamp in the upper area of
th e mobile phone system lights up, the mobile
phone is being charge d.
% Obser vethe no tes on loading theve hicle
(/ page 118). F F
itting/r
itting/r emo
emoving t
ving t he
he 0oor
0oor mats
mats &
W
WARNING
ARNING Risk of accident due toobjects
in the driver's foot we ll
Objects in the driver's foot we ll may impede
pedal tr avel or block a depressed pedal.
This jeopardises the operating and road saf ety
of theve hicle. #
Stow all objects in theve hicle securely
so that they cannot getinto the driver's
fo ot we ll. #
Always /t the 0oor mats securely and as
prescribed in order toensure that there
is alw ays su1cient room forth e pedals. #
Do not use loose 0oor mats and do not
place 0oor mats on top of one ano ther. Inst Inst
allation
allation #
Slide the cor responding seat backwards and
lay the 0oor mat in thefo ot we ll. #
Press studs 1onto holders 2. #
Adjust the cor responding seat. R R
emov emov al
al #
Slide the cor responding seat backwards and
pull the 0oor mat o. holders 2. #
Remo vethe 0oor mat. Seats and st
owing
133
133

mitted in some countries. In
this case, the stand-
ing lights are also switched on in the parking
lights position.
If th e battery is insu1cient lych arge d, the stand-
ing lights or parking lights will be switched o.
automatically tofacilitate the next engine start.
The exterior lighting (e xcept standing and parking
lights) will switch o. automatically when the driv-
er's door is opened.
R Obser vethe no tes on sur round lighting
(/ page 140).
A A ut
ut omatic dr
omatic dr iving lights function
iving lights function
When theve hicle is switched on, the standing
lights, low beam and daytime running lights are
switched on automatically depending on the light
conditions. &
W
WARNING
ARNING Risk of accident when the
dipped beam is switched o. in poor visi-
bility
When the light switch is set toà ,the
dipped beam may not be switched on auto- matically if
there is fog, snow or other causes
of poor visibility such as spr ay. #
In such cases, turn the light switch to
L . The automatic driving lights are only an aid.
Yo u
are responsible forve hicle lighting.
Switc
Switc hing t hing t he r
he rear f
ear f og lights on or
og lights on or o.
o.
R
R eq
eq uir
uir ements:
ements:
R The light switch is in theL orà posi-
tion. #
Press the R button.
Please obser vethe count ry-speci/c la wsonthe
use of rear fog lamps. Oper
Oper
ating t
ating t he combination switc
he combination switc h f
h for t
or t he lights
he lights 1
High beam
2 Turn signal light, right
3 Headlamp 0ashing
4 Turn signal light, leT #
Use the combination switch toselect the
desired function. Light and sight
135
135

Switc
Switc
hing on high beam
hing on high beam #
Turn the light switch totheL orÃ
position. #
Push the combination switch be yond the point
of resis tance in the direction of ar row 1.
When the high beam is activated, the indicator
lamp for low beam Lwill be deactivated
and replaced bythe indicator lamp for high
beam K.
Switc
Switc hing
hingo.
o.high beam
high beam #
Movethe combination switch back toits start-
ing position.
Headlam
Headlam p
p0ashing
0ashing #
Pull the combination switch in the direction of
ar ro w 3.
T
T ur
ur n signal light
n signal light #
T To indicat
o indicat e
ebr
br ie0y:
ie0y: push the combination
switch brie0y tothe point of resis tance in the
direction of ar row 2 or4.
The cor responding turn signal light will 0ash
th re e times. #
T
T o indicat o indicat e per
e permanentl y:
manent ly:push the combina-
tion switch be yond the point of resistance in
th e direction of ar row 2 or4. A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating t
ating the hazar
he hazar d w
d war
arning lights
ning lights #
Press button 1. The hazard
warning lights will switch on automati-
cally if:
R the airbag has been deplo yed.
R theve hicle is heavily braked from a speed of
more than 70 km/h toa standstill.
When you pull away again, the hazard warning
light system will switch o. automatically at
appr oximately 10 km/h. You can also switch o.
th e hazard warning light system using button 1. A A
dap
dap tiv
tive functions, MUL
e functions, MUL TIBEAM LED
TIBEAM LED Int
Int
ellig
ellig ent Light Syst
ent Light Syst em function
em function
The MULTIBEAM LED headlamp s adapttothe
driving and weather situation and pr ovide exten-
ded functions for impr oved illumination of the
ro ad.
The system comprises thefo llowing functions:
R Active headlamps (/ page 137)
R Cornering light (/ page 137)
R Motorw ay mode (/ page 137)
R Enhanced fog light function (/ page 138)136
136
Light and sight

A
A
ctiv
ctiv ating w
ating w elcome lighting
elcome lighting #
Select Colour. #
Select Welcome.
When theve hicle is unloc ked, a special ambi-
ent lighting sequence will run.
A
A ctiv
ctiv ating dependency on air conditioning se
ating dependency on air conditioning se t-
t-
tings
tings #
Select Colour. #
Select Climate .
If ch anges are made tothete mp erature set-
ting in theve hicle, the colour of the ambient
lighting will change brie0y. Switc
Switc
hing t
hing t he int
he inter
erior lighting
ior lighting switc
switch-o.
h-o. delay
delay
time
time on/o.
on/o. Multimedia system:
4 © 5
Settings 5
Lights
5 Int. light. del. sw. off #
Switch the swit ch-o. delay time on or o..
When this function is active, the interior light-
ing lights up for a short time aTer theve hicle
is loc ked. W
W
indscr
indscr een wiper
een wiper s and windscr
s and windscr een w
een washer sy
asher sy s-
s-
t
t em
em Switc
Switc
hing t
hing t he windscr
he windscr een wiper
een wipers
son/o.
on/o. 1
gWindsc reen wipers o.
2 Ä Intermittent wiping, normal
3 Å Intermittent wiping, frequent 4
° Continuous wiping, slow
5 ¯ Continuous wiping, fast #
Turn the combination switch tothe cor re-
sponding position 1-5. #
Single wipe/w
Single wipe/w ashing:
ashing:pushthe button on the
combination switch in the direction of ar row
1 .
R í Single wipe
R î Wiping with washer 0uid
% Obser vethe no tes on washing theve hicle in a
car wash (/ page 343). R
R
eplacing t
eplacing t he windscr
he windscr een wiper blades
een wiper blades &
W
WARNING
ARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can be
trapped bythe wiper arm. 142 142
Light and sight

#
Foldthe wiper arms back onto the wind-
screen. #
Switch on theve hicle. #
Press theî button on the combination
switch (/ page 142).
The wiper arms will return totheir original
positions. #
Switch o. theve hicle.
% Check the condition of the wiper blades regu-
lar lyand replace them in theev ent of visible
damage or ongoing smearing. Maint
Maint enance display
enance display #
Remo veprotective /lm 1from the mainte-
nance displa yson the tips of the ne wly/tted
wiper blades.
When the colour of the maintenance displa ys
ch anges from black toyello w, replace the wiper
blades. %
The duration until the colour changes varies
depending on the usage conditions. Mirr
Mirr
ors
ors Oper
Oper
ating t
ating t he outside mirr
he outside mirr ors
ors &
W WARNING ARNING Risk of accident due toadjust-
ing theve hicle settings while theve hicle is
in motion
Yo u could lose control of theve hicle in thefo l-
lowing situations in particular:
R ifyo u adjust the driver's seat, the head
re straint, the steering wheel or the mir ror
while theve hicle is in motion
R ifyo ufa sten your seat belt while theve hi-
cle is in motion #
Before starting theve hicle: in particular,
adjust the driver's seat, head restraint,
stee ring wheel and mir ror,and fasten
yo ur seat belt. 144
144
Light and sight

&
W
W ARNI NG
ARNI NGRisk of accident due tomis-
judgement of distance when using the
outside mir ror
The outside mir rors re0ect objects on a
smaller scale. The objects in vi eware in fact
closer than they appear. #
Therefore, alw ays look overyo ur shoul-
der in order toensure that you are aware
of the actual distance between you and
th ero ad users driving behind you. F
F
olding t
olding t he outside mirr
he outside mirr or
ors in/out
s in/out #
Brie0y press button 1.
R
R ese
ese tting t
tting t he outside mirr
he outside mirr ors
ors
% Ifth e battery has been disconnected or com-
ple tely dischar ged, the outside mir rors must
be reset. Only then will the automatic mir ror
fo lding function workproper ly. #
Brie0y press but ton1. A
A
djus
djusting t ting t he outside mirr
he outside mirr ors
ors #
Press button 3or4 toselect the outside
mir rorto be adjus ted. #
Press button 2toadjust the position of the
mir ror glass.
Eng
Eng aging t
aging t he outside mirr
he outside mirr ors
ors #
Vehicles without elect rically folding outside
mir rors: manually mo vethe outside mir ror into
th e cor rect position. #
Vehicles with elect rically folding outside mir-
ro rs: press and hold button 1.
Yo u will hear a click and the mir ror will audibly
click into place. The outside mir ror will now be
set tothe cor rect position. A
A
ut
ut omatic anti-dazzle mirr
omatic anti-dazzle mirr or
ors function
s function &
W
WARNING
ARNING Risk of acid burns and poison-
ing due tothe anti-dazzle mir ror electro-
ly te
Electrolyte may escape if the glass in an auto-
matic anti-dazzle mir ror breaks. Light and sight
145
145