Page 401 of 533

&
W
WARNI NG
ARNI NGRisk of an accident due to
va pour poc kets form ing in the brake sys-
tem
The brake 0uid constantly absorbs moisture
from the air. This lo wersthe boiling point of
th e brake 0uid. If the boiling point is too lo w,
va pour poc kets may form inthe brake system
when the brakes are applied hard.
This impairs the braking e.ect. #
Have the brake 0uid rene we d at the
speci/ed inter vals. Ha
ve the brake 0uid regula rly re placed at a quali-
/ed specialist workshop.
Only use a brake 0uid appr ovedby Mercedes-
Benz according toMB-F reigabe or MB-Appr oval
331.0. Coolant
Coolant
N
No
ot
tes on coolant
es on coolant
Obser vethe no tes on operating 0uids
(/ page 391). &
W
WARNING
ARNING Risk of /re‑ and injury from
antif reeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Allow the engine tocool down before
yo uto p up the antifreeze. #
Make sure that no antif reeze spills out
next tothe /ller opening. #
Thoroughly clean the antifreeze from
component parts before starting the
ve hicle. *
N
NOOTE
TE Damage caused byincor rect cool-
ant #
Only use coolant that has been premixed
with there qu ired antifreeze pr otection.
Information on coolant is available at thefo l-
lowing locations:
R Inthe Mercedes-Benz Speci/cation for
Operating Fluids 320.1 -
Athttps://be vo.mercedes-benz.com
- Inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop *
N NOOTE TE Overheating at high outside temp er-
atures If an inappropriate coolant is used,
the engine
cooling system is not su1ciently pr otected
against overheating and cor rosion at high out-
side temp eratures. #
Only use coolant appr ovedfor
Mercedes-Benz. #
Obser vethe inst ructions in the
Mercedes-Benz Speci/cations for Oper-
ating Fluids 320.1. Ha
ve the coolant regula rly re placed at a quali/ed
specialist workshop.
Proportion of antif reeze concentrate in the engine
cooling system:
R A minimum of 50% (antifreeze pr otection down
to about -37°C) 398
398
Te
ch nical data
Page 433 of 533

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Ù
Rear axle steering cur-
rently unavailable *T
herear axle steering is temp orarily una vailable. The turning circle may become wider. #
Stop theve hicle in accordance with the tra1c conditions and restart theve hicle.
If th e display message does not disappear: #
Drive on carefull y. #
Consult a quali/ed specialist workshop.
Electronic rear axle differ-
ential lock inoperative *T
he elect ronic locking di.erential has failed. #
Consult a quali/ed specialist workshop.
Electronic rear axle differ-
ential lock currently
unavailable *T
he elect ronic locking di.erential is overheated. #
Let the electronic locking di.erential cool down bydriving defensivel y.
Active bonnet malfunction
See Owner's Manual *T
he active bonn et(pedest rian pr otection) is malfunctioning or inoperative aTer having already been triggered. #
Consult a quali/ed specialist workshop.
C *A
t least one door is open. #
Close all doors.
Rear spoiler control sys-
tem inoperative *T
herear wing cann otreach the end position during retraction and extends again if possible.
The vehicle's speed may be restric ted. 430 430
Display messages and
warning/indicator lamps
Page 434 of 533

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
If re traction of there ar wing is bloc ked, e.g. byice: #
Ensure that the cause of the bloc kage has been remo ved. #
Turn o. theve hicle and lock it. #
Start theve hicle aTer a fewminutes.
The rear wing will mo vetothe original position.
If th e problem persists or the cause cannot be de tected: #
Consult a quali/ed specialist workshop.
Rear spoiler inoperative
Limit XXX km/h *T
hevehicle's speed is limi tedto theva lue displa yed. Therefore, there ar wing cann otreach the end position during
ex tension and only extends as far as is possible.
If ex tension of there ar wing is bloc ked, e.g. byice: #
Ensure that the cause of the bloc kage has been remo ved. #
Switch theve hicle o. and lock it. #
Start theve hicle aTer a fewminutes.
The rear wing will mo vetothe original position.
If th e problem persists or the cause cannot be de tected: #
Consult a quali/ed specialist workshop. Displ
aymessages and warning/indicator lamps
431 431
Page 441 of 533

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
For all other transmission positions, park theve hicle safel y. #
Consult a quali/ed specialist workshop.
Reversing not poss. Con-
sult workshop *T
he transmission is malfunctioning. It is not possible toselect transmission position k. #
Consult a quali/ed specialist workshop.
Transmission Malfunction
Stop *T
he transmission is malfunctioning. The transmission shiTs toneutral iautomaticall y. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Depress the brake pedal. #
Engage park position j. #
Consult a quali/ed specialist workshop.
Stop vehicle Leave engine
running Wait Transmission
cooling *T
he transmission is overheating. Pulling away may be temp orarily impaired or not possible. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Leavethe engine running. #
Wait until the display message disappears before pulling away.
d
Trans. oil overheated Drive
on with care *T
ransmission position M Mand thete mp orary manual drive prog ram are no longer available. Engine output is reduced
depending on theove rheating. #
Let the transmission oil cool down bydriving defensively until the display message disappears. 438 438
Display messages and
warning/indicator lamps
Page 473 of 533
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Reduce speed *At least one tyre is overheating. The a.ected tyres are displa yed in red. At temp eratures close tothe limit value, the
tyres are displa yed in yello w. &
W
WARNI NG
ARNI NGRisk of an accident from driving with overheated tyres
Overheated tyres can burst. #
Reduce speed so that the tyres cool down. Engine oil
Engine oil
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
5
Add 1 litre engine oil when
next refuelling *T
he engine oil le vel has dropped tothe minimum le vel.
* N
NO OTE TE Engine damage caused bydriving with insu1cient engine oil #
Avoid long journe yswith insu1cient engine oil. #
When next refuelling, add 1 lit reof engine oil (/ page 341).
No tes on engine oil (/ page 396).470
470
Displ
aymessages and warning/indicator lamps
Page 474 of 533
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
5
Engine oil level Reduce oil
level *T
he engine oil le vel is too high.
* N NOOTE
TE Engine damage caused bydriving with excess engine oil #
Avoid long journe yswith excess engine oil. #
Consult a quali/ed specialist workshop immediately and ha vethe engine oil le velre duced.
5 Engine oil level Stop vehi-
cle Switch engine off *T
he engine oil le vel is too lo w.
* N
N O OTE
TE Engine damage caused bydriving with insu1cient engine oil #
Avoid long journe yswith insu1cient engine oil. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Switch o. theve hicle. #
Add 1 l of engine oil (/ page 341). #
Check the engine oil le vel.
No tes on engine oil (/ page 396). Displ
aymessages and warning/indicator lamps
471
471
Page 475 of 533

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
5
Engine oil pressure Stop
Switch off engine *T
he oil pressure is too lo w.
* N NO
OTE
TE Engine damage caused bydriving with insu1cient oil pressure #
Avoid driving with insu1cient oil pressure. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Switch o. theve hicle. #
Consult a quali/ed specialist workshop.
5
Engine oil level cannot be
measured *T
he elect rical connection tothe oil le vel sensor has been inter rupted or the oil le vel sensor is faulty. #
Consult a quali/ed speciali stwo rkshop. W W
ar
ar ning and indicat
ning and indicat or lam
or lamps
ps Ov
Ov
er
ervie
vie w of indicat
w of indicat or and w
or and war
arning lam
ning lam ps
ps Some systems will per
form a self-test when the
ve hicle is switched on. Some indicator and warn-
ing lamps may brie0y light up or 0ash. This beha v-
iour is non-critical. These indicator and warning lamps indicate a malfunction only if
they light up
or 0as haTer theve hicle has been star ted or dur-
ing a journe y. 472
472
Display message
s andwarning/indicator lamps
Page 483 of 533

W
W
ar
ar ning/indicat
ning/indicat or lampP
or lam pP ossible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Notethe messages on the instrument displa y.
If t
If t he coolant t
he coolant t em
emper
per atur
atur e displa
e displa y is at t
y is at the low
he lower end of t
er end of t he t
he tem
emper
per atur
atur e scale:
e scale: #
Consult a quali/ed specialist workshop.
If t
If t he coolant t
he coolant t em
emper
per atur
atur e displa
e displa y is at t
y is at the upper end of t
he upper end of t he t
he tem
emper
per atur
atur e scale:
e scale: #
Exit theve hicle and keep a safe distance from it until the engine has cooled down. #
Check the coolant le vel (/ page 342). #
Make sure that the air supply tothera diator is not obstructed. #
Avoiding high loads on the engine, drive tothe nearest quali/ed specialist workshop. In doing so, ensu rethat the
coolant temp erature display remains below 120°C.
ÿ
Coolant warning lamp (yel-
low) *T
he yellow coolant warning lamp is lit while the engine is running.
Po ssible causes:
R The temp erature sensor is malfunctioning
R The charge air, transmission oil or battery cooling is faulty
R The radiator shutters are bloc ked or defective #
Avoiding high loads on the engine, drive tothe nearest quali/ed specialist workshop. 480
480
Displ
aymessages and warning/indicator lamps