2021 MERCEDES-BENZ A-CLASS SALOON check engine

#
Tow- start theve hicle while the clutch pedal is
fully depressed. #
Slowly re leasethe clutch pedal. #
Immediately shiT toneutral if the engine
starts. #
Stop theve hicle in accordance with the tra1c
conditions. #
Remo vetheto w bar. #
Remo vetheto wing eye. #
Have theve hicle checked at a quali/ed spe-
cialist workshop. Electr
Electr
ical fuses
ical fuses N
No
ot
tes on electr
es on electr ical fuses
ical fuses &
W
WARNING
ARNING Risk of accident and injury due
to ove rloaded lines
If yo u manipulate or bridge a faulty fuse or if
yo ure place it with a fuse with a higher amper-
age, the electric line could be overloaded.
This could result in a /re. #
Alwaysre place faulty fuses with speci-
/ed new fuses containing the cor rect
amperage. *
N
NOOTE
TE Damage due toincor rect fuses Electrical components or systems may be
damaged
byincor rect fuses, or their function-
ality may be signi/cantly impaired. #
Only use fuses that ha vebeen appr oved
by Mercedes-Benz and which ha vethe
cor rect fuse rating. Blown fuses must be
replaced with fuses of the
same rating, whi chyou can recognise bythe col-
our and the label. The fuse ratings and fur ther
information tobe obser ved can be found in the
fuse assignment dia gram.
F F use assignment diagr
use assignment diagr am:
am:onthe fuse box in the
engine compartment (/ page 361). *
N
NOOTE
TE Damage or malfunctions caused by
moisture Moisture may cause damage
tothe electrical
system or cause it tomalfunction. #
When the fuse box is open, make sure
th at no moisture can enter the fuse box. #
When closing the fuse box, make sure
th at the seal of the lid is positioned cor-
re ctly on the fuse box. If
th e ne wlyinser ted fuse also blo ws, ha vethe
cause traced and recti/ed at a quali/ed specialist
wo rkshop.
Ensure thefo llowing before replacing a fuse:
R The vehicle is secured against rolling away.
R All electrical consume rsare switched o..
R The vehicle is switched o..
The elect rical fuses are located in various fuse
bo xes:
R Fuse box in the engine compartment on the
leT-hand side of theve hicle, when vie wed in
th e direction of tr avel (/ page 361) 360
360
Breakdown assistance

R
Fuse box in the front passenger foot we ll
(/ page 361)
R Fuse box in the centre of the boot
(/ page 362) Opening and closing t
Opening and closing t
he fuse bo
he fuse box in t
x in the engine
he engine
com
com par
partment
tment R
R
eq
eq uir
uir ements:
ements:
R A dry clo thand a scr ewdriver are available.
Obser vethe no tes on elect rical fuses
(/ page 360).
Opening
Opening &
W
WARNING
ARNING Risk of injury from using the
windscreen wipers when the bonnet is
open
If th e windscreen wipers start moving when
th e bonnet is open, you could be trapped by
th e wiper linkage. #
Always switch o. the windscreen wipers
and vehicle before opening the engine
bonnet. #
Open the bonnet. #
Remo veany existing moisture from the fuse
box using a dry clo th. #
Loosen scr ews1. #
Press clamps 2and liT the fuse box lid up
and out. The fuse assignment diag
ram is in a recess on the
side of the fuse box.
Closing Closing #
Check whe ther the seal is positioned cor rectly
in the lid. #
Place the lid on the fuse box. #
Make sure that clamps 2engage. #
Tighten scre ws1. #
Close the bonnet. Opening and closing t Opening and closing t
he fuse bo
he fuse box in t
x in the fr
he front
ont
passeng
passeng er f
er foo
ootw
twell
ell Obser
vethe no tes on elect rical fuses
(/ page 360). Breakdown assistance
361
361

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Place the key in the
marked space See Owner's
Manual *K
eydetection is malfunctioning. #
Change the location of theke y in theve hicle. #
Place theke y in the slot for starting the engine with theke y (/ page 160). Lights Lights
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
:
Left dipped beam (examp le) *T
he cor responding light source is defecti ve. #
Drive on carefull y. #
Consult a quali/ed specialist workshop immediatel y.
or #
Check whe ther you are permitted toreplace the light source yourself (/ page 140).
% LED light sources: the display message forth e cor responding light appears only when all the light-emitting diodes
in the light are faulty. 408
408
Display message
s andwarning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Request service personnel from the operator of thech arging station via the emer gency call button attached tothe
ch arging station or the emer gency call numbers.
Vehicle not currently being
charged Charging station
fault *A
malfunction has occur red in thech arging station or the RFID card is not recognised. #
Start thech arging process at a di.erent charging station.
or #
Have the RFID card checkedto ensure it is functioning.
Charging method currently
unavailable Please try
again or change charging
method *A
temp orary malfunction has occur red in thech arging station. #
Wait until the malfunction has passed.
or #
Start thech arging process at a di.erent charging station.
Charging fault Please
change charging method
See Owner's Manual *A
temp orary malfunction has occur red in thech arging station. #
Wait until the malfunction has passed.
or #
Start thech arging process at a di.erent charging station.
Only electric drive availa-
ble Power limited *T
he fuel tank is em pty and the combustion engine is switched o.. The output of your vehicle is limi ted because you
are driving in elect ric mode. 416 416
Display messages and
warning/indicator lamps

V
V
ehicle
ehicle Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
d
Vehicle is operational
Switch off ignition before
exiting *Y
ou are leaving theve hicle in a ready-to-drive state. #
Get out of theve hicle, secure it against rolling away and take theke y with you. #
Ifyo u do not lea vetheve hicle, switch o. the electrical consumers, e.g. the seat heating. Otherwise, the 12‑V bat-
te ry may dischar geand starting the engine may be possible only with the help of a second battery (jump start).
ï
Check trailer hitch
lock (white display message) *T
he trailer hitch is not operational during a jou rney with a trailer. &
W WARNING
ARNING Risk of an accident if the ball neck is not loc ked
The trailer may become de tach ed. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Uncouple the trailer and secure it against rolling away. #
Initiate a new swivelling procedu reand do not re-couple the trailer until the display message disappears. #
Initiate a new swivel mo vement (/ page 265). #
When the display message disappears, couple up the trailer and drive on.
If th e display message does not disappear, the trailer hitch is malfunctioning and the ball neck is not loc ked. Display messages and
warning/indicator lamps
421
421

Engine
Engine
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
To switch off the engine,
press the Start/Stop but-
ton for at least 3 seconds
or 3 times. *Y
ou ha vepressed the start/s top button while theve hicle is in motion. #
Information about switching o. theve hicle while driving (/ page 160).
Cannot start engine See
Owner's Manual *T
hevehicle cann otbe star ted. #
Switch theve hicle o. and switch it back on #
Ifth e display message still appears, consult a quali/ed specialist workshop.
+
Top up coolant See Own-
er’s Manual *T
he coolant le vel is too lo w.
* N NO
OTE
TE Engine damage due toinsu1cient coolant #
Avoid long journe yswith insu1cient coolant. #
Add coolant (/ page 330). #
Have the engine cooling system checked at a quali/ed specialist workshop. Displ
aymessages and warning/indicator lamps
427
427

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
#
Stop vehicle Leave engine
running *T
he 12 V battery charge leve l is too lo w. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Leavetheve hicle running #
Ifth e display message disappears: drive on. #
Ifth e display message does not disappear: consult a quali/ed specialist workshop. T T
yr
yr e pr
e pr essur
essur e monit
e monit or
or Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
Tyre press. monitor cur-
rently unavailable *T
here is inter fere nce from a po werful radio signal source. As a result, no signals from the tyre pressure sensors are
being received. The tyre pressure monitoring system is temp orarily una vailable.
The tyre pressure monitoring system will restart au tomatically as soon as the cause has been recti/ed. #
Drive on.
Tyre press. monitor inoper-
ative *T
he tyre pressure moni toring system is malfunctioning. &
W WARNI NG
ARNI NGThere is a risk of an accident if the tyre pressure monitoring system is malfunctioning
The tyre pressure monitoring system cannot issue a warning if there is pressure loss in one or more of the tyres.
Ty res with insu1cient tyre pressure may impair the driving characteristics as well as steering and braking. #
Have the tyre pressure monitoring system checked at a quali/ed specialist workshop. 458
458
Displ
aymessages and warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Switch o. theve hicle. #
Add 1 l of engine oil (/ page 328). #
Check the engine oil le vel.
No tes on engine oil (/ page 391).
5
Engine oil pressure Stop
Switch off engine *T
he oil pressure is too lo w.
* N
N O OTE
TE Engine damage caused bydriving with insu1cient oil pressure #
Avoid driving with insu1cient oil pressure. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Switch o. theve hicle. #
Consult a quali/ed specialist workshop.
5
Engine oil level cannot be
measured *T
he elect rical connection tothe oil le vel sensor has been inter rupted or the oil le vel sensor is faulty. #
Consult a quali/ed speciali stwo rkshop. Displ
aymessages and warning/indicator lamps
467 467